Whitney

320 Pacific Avenue is in Whitney, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Algiers Point historic district under full HDLC control, so most exterior changes need approval first. The city has 10 permits on record here; the most recent, an electrical repair / replacement / addition permit, was filed in March 2023. 4 are still open. On this block in the past year: 13 requests to 311 and 8 calls to police.

Zoning
HU-RD2
Historic district
Algiers Point (Full control)
National Register
Algiers Point Historic District
Council district
C
Ward
15
Lot size
4,311 sq ft
Parcel
41001221

Everything on record here

10 records, newest first · 4 open

  1. Permit Electrical Repair / Replacement / Addition Permit Cancelled

    Scope of Work: -Provide and install a 200 Amp Meter Socket and Stem -Provide and install a 200 Outdoor Main Breaker Panel with 40 Spaces -Provide and install standard snap type breakers -Provide and install a 60 Amp Circuit to power the shed up to 125' -Provide and install 50' of conduit buried underground, trench will be dug by us. -Provide and install a 60 Amp Sub Panel. -Provide and install outlets through out rear building. -Provide and install fixture and receptacle boxes. -Install customer supplied fixtures. PANEL WARRANTY: 5 Year Parts and Labor OTHER PROVIDED ELECTRICAL COMPONENTS WARRANTY: 1 Year Parts and Labor

    Permit
    23-06534-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $11,577
    Fees
    $100
    Contractor
    Patrick Michael Higgins
    Days from application to issue
    18
    Expires
    Sep 30, 2023
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  2. Permit Street Cut Other
    Permit
    21-06191-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $205
    Days from application to issue
    20
    Expires
    Sep 24, 2021

    See this permit on One Stop

  3. Permit HDLC COA Permit Finaled

    Replace Aluminum/Wood siding with Hardi Plank (Smooth Exposure) Siding as needed to match existing. Repair/Replace columns at front porch to match existing in material, dimension, size, profile, exposure, relief, detail, shape, configuration, type, and operation. Repair wooden trim as needed, to match existing. All work done in preparation to paint.

    Permit
    20-34112-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Jan 14, 2021

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) Other

    Replace Aluminum/Wood siding with Hardi Plank (Smooth Exposure) Siding as needed to match existing. Repair/Replace columns at front porch to match existing in material, dimension, size, profile, exposure, relief, detail, shape, configuration, type, and operation. Repair wooden trim as needed, to match existing. All work done in preparation to paint.

    Permit
    20-34112-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,020
    Fees
    $135
    Days from application to issue
    14
    Expires
    Jan 24, 2021
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  5. Permit HDLC COA Permit Finaled

    Repair columns, repair trim as needed, and paint

    Permit
    18-10480-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 28, 2018

    See this permit on One Stop

  6. Permit General Mechanical Permit Finaled

    Fire Job- (#41845) Nims Knobloch 13-16796-Rnvs

    Permit
    13-30701-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Nims Knobloch Jr
    Days from application to issue
    0
    Expires
    Jan 17, 2014

    See this permit on One Stop

  7. Permit Construction Loop Permit Issued

    TEMP POLE- 13-16796

    Permit
    13-30193-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Raymond Michael Amedeo Jr
    Days from application to issue
    0
    Expires
    Jan 10, 2014

    See this permit on One Stop

  8. Permit Electrical Service / Circuit / Feeder Permit Issued

    FIRE REPAIRS- 13-16796

    Permit
    13-28488-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $103
    Contractor
    Raymond Michael Amedeo Jr
    Days from application to issue
    0
    Expires
    Dec 25, 2013

    See this permit on One Stop

  9. Permit Renovation (Structural) Permit Issued

    Fire damage repair to existing single - sheetrock, paint, flooring, electrical repairs, ac repairs, cabinets, exterior structural roofing repairs and other exterior repairs as per HDLC C/A 13-14980-HDLC.

    Permit
    13-16796-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $38,679
    Fees
    $383
    Contractor
    Van Hoven Contracting Inc
    Days from application to issue
    0
    Expires
    Nov 30, 2013

    See this permit on One Stop

  10. Permit HDLC COA Permit Issued

    r/r siding and gable vent at rear, roofing; paint

    Permit
    13-14980-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    15
    Expires
    Nov 29, 2013

    See this permit on One Stop