Tulane - Gravier

1922 Conti Street is in Tulane - Gravier, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Mid-City historic district under partial HDLC control, where demolition needs HDLC review. The city has 15 permits on record here; the most recent, a mechanical fuel gas permit, was filed in September 2019. 10 are still open. On this block in the past year: 9 requests to 311 and 12 calls to police.

Zoning
HU-RD2
Historic district
Mid-City (Partial control)
National Register
Mid-City Historic District
Council district
B
Ward
4
Lot size
2,687 sq ft
Parcel
41017462

Everything on record here

15 records, newest first · 10 open

  1. Permit Mechanical Fuel Gas Permit Finaled

    All renovation to single family residence 0-50feet new line to 1 stove only & 1 electric water heater

    Permit
    19-28238-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $500
    Fees
    $35
    Days from application to issue
    4
    Expires
    Mar 9, 2020
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Finaled

    Rough-in. 9432

    Permit
    19-23107-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $133
    Contractor
    Charles Thurber Pierson
    Days from application to issue
    0
    Expires
    Jan 23, 2020
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  3. Permit Mechanical HVAC Permit Finaled

    Install a 3.5 ton a/c with electric heat.

    Permit
    19-20284-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $4,500
    Fees
    $68
    Days from application to issue
    0
    Expires
    Dec 25, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  4. Permit Renovation (Structural) Occupancy

    Refinish existing floors, drywall, interior and exterior paint. Bathroom (plumbing fixtures only) & kitchen cabinets/counter tops. Electric, Gas, Plumbing, HVAC. Adding Addition

    Permit
    19-08995-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $79,000
    Fees
    $534
    Contractor
    Daniel Humberto Pastrana
    Days from application to issue
    0
    Expires
    Oct 12, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Issued

    Repair/Replace/Paint Existing Siding/Exterior. Repair/Replace/Paint Existing Sheetrock/Interior. Refinish existing floors. Bathroom (plumbing fixtures only) & kitchen cabinets/counter tops. Electric, Gas, Plumbing, HVAC.

    Permit
    19-08995-RNVN
    Type
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $63,000
    Fees
    $375
    Days from application to issue
    7
  6. Permit General Mechanical Permit Finaled

    replace 2-ton condenser. David Lambert (#6843) #A

    Permit
    14-17697-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Contractor
    David Lambert
    Days from application to issue
    26
    Expires
    Jan 1, 2015

    See this permit on One Stop

    Placed here by the building address from “1922 Conti St #A”.

  7. Permit General Mechanical Application Acceptance - Approved

    METER OUT OVER SIX MONTHS. THOAMS HUGHES(#1336)

    Permit
    08MCH-14228
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Hughes Plumbing & Mechanical
    Days from application to issue
    5
  8. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    VACANCY

    Permit
    08ELC-16774
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Zapalowski Electric
    Days from application to issue
    10
  9. Permit General Mechanical Application Acceptance - Approved

    wh & reconnect jay #10479

    Permit
    07MCH-05983
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Mudbug Plbg. Repair Inc.
    Days from application to issue
    5
  10. Permit General Mechanical Application Acceptance - Approved

    wh & reconnect jay #10479

    Permit
    07MCH-05985
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Mudbug Plbg. Repair Inc.
    Days from application to issue
    5
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-05201
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $63
    Contractor
    Wayne H Wellmeier
    Days from application to issue
    10
  12. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    INCREASE

    Permit
    06ELC-40214
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $63
    Contractor
    Wayne H Wellmeier
    Days from application to issue
    10
  13. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    INCREASE

    Permit
    06ELC-40215
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $33
    Contractor
    Wayne H Wellmeier
    Days from application to issue
    10
  14. Permit Residential APPROVAL

    Katrina Repairs

    Permit
    ACCELA-89318
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $50,000
  15. Permit Electrical

    ELECTRICAL RECONNECT DOUBLE RESIDENCE ELECTRICAL VACANCY

    Permit
    E01008720
    Type
    Electrical
    Days from application to issue
    0

    Placed here by the building address from “1922 CONTI ST UNIT B”.