Mid-City

219 North Rendon Street is in Mid-City, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Mid-City historic district under partial HDLC control, where demolition needs HDLC review. The city has 6 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in February 2008. 6 are still open. On this block in the past year: 2 requests to 311 and 16 calls to police.

Zoning
HU-RD2
Historic district
Mid-City (Partial control)
National Register
Mid-City Historic District
Council district
B
Ward
4
Lot size
2,508 sq ft
Parcel
41019510

Everything on record here

6 records, newest first · 6 open

  1. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE

    Permit
    08ELC-02850
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Pizzeck A/C & Elec.
    Days from application to issue
    10
  2. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    RENOVATIONS

    Permit
    08ELC-02852
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $138
    Contractor
    Pizzeck A/C & Elec.
    Days from application to issue
    10
  3. Permit General Mechanical Inspection - Completed

    rll-cisco-329-6411-1-ac-1-waf-ck-1965

    Permit
    08MCH-00190
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Cisco's Htg. & A/C
    Days from application to issue
    5
  4. Permit General Mechanical Inspection - Completed

    rll-r-dey-481-5952-gas-line-1-wh-ck-6314

    Permit
    07MCH-15789
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Deys Maint. Serv.
    Days from application to issue
    5
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-27764
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $110
    Contractor
    Mcguire Elect Co Inc
    Days from application to issue
    10
  6. Permit Certificate of Occupancy Certificate Issued No Meter

    CERTIFICATE OF OCCUPANCY FOR TEMPORARY FEMA TRAILER; SETTING UP, ELECTRICAL, SEWER, WATER, AND TIE-INS.

    Permit
    06OCC-02625
    Type
    Certificate of Occupancy
    Work
    NA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150