Mid-City

3323 Iberville Street is in Mid-City, zoned HU-MU (Older neighborhoods, walkable mix of shops with homes above). It is in the Mid-City historic district under partial HDLC control, where demolition needs HDLC review. The city has 9 permits on record here; the most recent, a general mechanical permit, was filed in April 2008. 9 are still open. On this block in the past year: 5 requests to 311 and 3 calls to police.

Zoning
HU-MU
Historic district
Mid-City (Partial control)
National Register
Mid-City Historic District
Council district
B
Ward
4
Lot size
3,228 sq ft
Parcel
41021088

Everything on record here

9 records, newest first · 9 open

  1. Permit General Mechanical Application Acceptance - Approved

    *Glenn Reed furnace A/C ck#7394

    Permit
    08MCH-06338
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Contractor
    Glenn Reed Ac Inc.
    Days from application to issue
    5
  2. Permit General Mechanical Application Acceptance - Approved

    *Glenn Reed furnace A/C ck#7394

    Permit
    08MCH-06339
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Contractor
    Glenn Reed Ac Inc.
    Days from application to issue
    5
  3. Permit General Mechanical Application Acceptance - Approved

    gas line,water heater tom ck# 7294

    Permit
    08MCH-03994
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Hooked Up Plbg
    Days from application to issue
    5
  4. Permit General Mechanical Application Acceptance - Approved

    gas line water heater tom ck# 7294

    Permit
    08MCH-03995
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Hooked Up Plbg
    Days from application to issue
    5
  5. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE

    Permit
    08ELC-00733
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Assured Elec.
    Days from application to issue
    10
  6. Permit Electrical Permit Issuance Active

    REWIRE

    Permit
    08ELC-00734
    Type
    Electrical
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $117
  7. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-00735
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $117
    Contractor
    Assured Elec.
    Days from application to issue
    10
  8. Permit Emergency Permit Inspection - Completed

    HURRICANE DAMAGE REPAIRS TO INCLUDE: FLOORS, SHEETROCK, ROOF, PLUMBING, ELECTRICAL AND OTHER REPAIRS AS NEEDED TO MAKE THE HOME LIVEABLE

    Permit
    07BLD-12423
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $40,000
    Fees
    $-50
    Days from application to issue
    5
  9. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT DOUBLE RESIDENCE INSTALL NEW GAS LINE; ADD'L OUTLETS; FOUR ODS SPACEHEATERS AND ENTERGY GAS LEAK.150,000 BTU. AL 888-2515.

    Permit
    M01007093
    Type
    Mechanical
    Days from application to issue
    0