French Quarter

841 Barracks Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 29 permits on record here; the most recent, a VCC paint permit, was filed in September 2026. 18 are still open. On this block in the past year: 13 requests to 311 and 32 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
3,666 sq ft
Parcel
41021686

Everything on record here

29 records, newest first · 18 open

  1. Permit VCC Paint Permit Issued

    EXPOSED BRICK IS NOT TO BE PAINTED Windows, doors, and trim: Monterrey white HC-27 Shutters: Yorktown green HC-133 Stucooed walls ONLY, barracks elevation, and interior stair ONLY: Gettysburg grey HC-107

    Permit
    26-28053-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    12
    Expires
    Apr 5, 2027
    1. Final VCC
    2. Application Submitted Complete
    3. Returned for revision Complete
    4. Application Review Complete
    5. Permit Approved Complete
    6. Permit Issued Complete
    7. Vieux Carré Commission Approved

    See this permit on One Stop

  2. Permit VCC General Work Permit Issued

    Repairs to rear dependency per attached materials stamped VCC approved 02/05/2026. Repoint masonry utilizing mortar mixed and applied per the VCC standard detail sheet (attached). Repair cracks above Dauphine-side second floor door openings closest to Barracks and Esplanade. Replace failed headers with new L3x3x1/4 steel angles. Reconstruct door jamb in opening closest to Esplanade, to match existing in size, profile, dimension, attachment, reveal, material, color, finish and operation. Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached).

    Permit
    25-11806-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    290
    Expires
    Aug 5, 2026

    See this permit on One Stop

  3. Permit Renovation (Structural) Permit Issued

    To tuck point exterior brick on second floor balcony and repair bricks above two openings and rebuild one door jamb

    Permit
    25-11806-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $20,050
    Fees
    $225
    Contractor
    Mason Masters LLC
    Days from application to issue
    376
    Expires
    Oct 27, 2026
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  4. Permit VCC General Work Permit Issued

    To tuck point and repair various and miscellaneous areas of masonry building. To repoint masonry utilizing mortar mixed and applied per the VCC standard detail sheet (attached) Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). VOIDS IN THE BRICK ARE NOT TO BE FILLED WITH MORTAR. BROKEN, DETERIORATED BRICKS MUST BE REPLACED WITH BRICKS MATCHING THE PREVIOUS. All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mix should range in color from off-white to beige but should not be grey in color. MORTAR IS NOT TO BE APPLIED OVER THE FACE OF THE BRICKS UNDER ANY CIRCUMSTANCES. Doing so will result in a STOP WORK ORDER being placed on the property and violation case will be opened on the property. Lath of any kind is prohibited unless preapproved by VCC staff prior to installation. Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.

    Permit
    23-03576-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Aug 14, 2023

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Issued

    To tuck point and repair various and miscellaneous areas of masonry building

    Permit
    23-03576-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $13,460
    Fees
    $285
    Contractor
    Mason Masters
    Days from application to issue
    114
    Expires
    Nov 30, 2023
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  6. Permit Street Cut Other

    Tie in client subsurface drainage to City of New Orleans subsurface drainage located on sidewalk

    Permit
    21-31748-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Yazoo Restorations
    Days from application to issue
    32
    Expires
    Jun 13, 2022

    See this permit on One Stop

  7. Permit Sidewalk Repair Other

    Remove small section of sidewalk to tie in subsurface and replace concrete with new.

    Permit
    21-28332-RSWR
    Type
    Sidewalk Repair
    Work
    Sidewalk Repair
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Yazoo Restorations

    See this permit on One Stop

  8. Permit VCC General Work Other

    Work on rear dependency balcony, per attached materials stamped VCC approved 11/13/19, as follows: Remove deteriorated floor boards, stringers, and fascia boards. Install new 3"x4" beaded stringers, 5/4x4 T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). Paint top and sides of new decking medium gray, semigloss. Paint underside of decking, stringers and fascia white, semigloss. Replace turned columns and railings on second floor, per attached stamped drawing. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure NOTE: Permit issued in response to violations. Work shall commence no less than 30 days after permit is issued. Work must be completed no less than 60 days after work begins. Owner will call VCC for final inspection upon completion of work.

    Permit
    19-33680-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    21
    Expires
    May 13, 2020

    See this permit on One Stop

  9. Permit Renovation (Non-Structural) Other

    Non-structural balcony repair for rear structure only,

    Permit
    19-33680-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $3,500
    Fees
    $360
    Contractor
    Yazoo Restorations
    Days from application to issue
    23
    Expires
    May 14, 2020
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  10. Permit Renovation (Non-Structural) Permit Cancelled

    replace standing seem abat vent with Copper standing seam also replace gutters with copper on main house

    Permit
    17-17959-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $27,565
    Fees
    $300
    Contractor
    ARC Roofing LLC

    See this permit on One Stop

  11. Permit VCC General Work Permit Cancelled

    Remove all existing, unpermitted and/or unshielded light fixtures Install Remcraft 110 series ceiling mounted downlight (single light) or Remcraft 2100 series ceiling mounted downlight (double light) to the underside of the balcony/gallery centered over the window/door openings Fixtures shall be painted to match adjacent building surface. All wiring shall be placed in conduits All conduits shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000K color temperature, 80+ color rendering index, and (600-800, residential) (800-1200, commercial) lumens per bulb Remove existing standing seam metal abat-vent and gutters and replace with standing seam copper abat-vent and 6" half-round copper gutters. Remove/replace deteriorated wood soffit & touch up paint. Repoint bricks where mortar is missing on Barracks side of rear dependency, using VCC mortar formula (attached). Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted.

    Permit
    16-39179-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    36
    Expires
    Jul 5, 2017

    See this permit on One Stop

  12. Permit Renovation (Non-Structural) Other

    Non structural renovation to single family dwelling. Work will include exterior work only as approved by VCC.

    Permit
    16-39179-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $24,000
    Fees
    $270

    See this permit on One Stop

  13. Permit VCC General Work Application Accepted

    Masonry: Rework bulge in bricks at Barrack St wall, repointing cracked mortar at same area, necessary because of water infiltration Termite: Treatment of termites, based on VCC recommendation method, attached is proposal from Absolute Termite

    Permit
    16-27947-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  14. Permit Renovation (Non-Structural) Other

    Masonry: Rework bulge in bricks at Barrack St wall, repointing cracked mortar at same area, necessary because of water infiltration Termite: Treatment of termites, based on VCC recommendation method, attached is proposal from Absolute Termite

    Permit
    16-27947-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $3,500
    Fees
    $120
    Contractor
    Yazoo Restorations

    See this permit on One Stop

  15. Permit VCC General Work Permit Issued

    To remove existing, unpermitted metal cap flashing from parapet of service building Remove deteriorated roofing material adjacent to parapet Repair/replace underlayment as necessary Install new 16 oz. copper step flashing and counter flashing Apply new mortar cap to top of parapet wall per VCC formulas and standard details (attached) Install new Vermont natural slate to match existing using copper nails as needed adjacent to parapet

    Permit
    16-14553-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 5, 2016

    See this permit on One Stop

  16. Permit Renovation (Non-Structural) Other

    1. Remove parapet wall cap 2. Install new 16 ounce copper step flashing and counter flashing(16') 3. Apply new mortar cap on top of parapet wall. 4. Install new Vermont slate to match the existing as close as possible. *NOTE* Home is leaking, if we can get emergency permit on above repair that would be great.

    Permit
    16-14553-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $3,350
    Fees
    $120

    See this permit on One Stop

  17. Permit Electrical Service / Circuit / Feeder Permit Issued

    Installation & Termination of 3 - #6 THWN Copper Conductors in new underground board conduits (by others) to obtain 120 Volts from Entergy Vault to New Wireless Antenna Poles, along with the grounding of poles.

    Permit
    14-32274-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $950
    Fees
    $52
    Contractor
    Crown Castle
    Days from application to issue
    5
    Expires
    Apr 22, 2015

    See this permit on One Stop

  18. Permit VCC General Work Permit Issued

    • Repair and/or replace underlayment as necessary • Replace/install natural slate roofing as needed to match existing using copper nails. • Install/repair copper gutters, flashing and vents as needed, removing any galvanized flashing • Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles • Metal cap-flashing on the parapets is not allowed • Replace any wood siding and trim as necessary to match existing • All repair/replacement work shall match existing in color, size, material, detail, profile and exposure Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré.

    Permit
    14-11476-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Oct 10, 2014

    See this permit on One Stop

  19. Permit VCC General Work Permit Issued

    Proposal to install three (3) gas lanterns above rear courtyard doorway openings, per AC approval of 12/10/13, and materials received 11/07/13 and stamped VCC approved 12/10/13, as follows: • One (1) Ricca’s 23”h x 13.5”w copper and glass fixture with yoke bracket mounted to the eaves of the roof overhang, centered above each of the three arched door-openings on the rear elevation of the main cottage.

    Permit
    13-47351-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    34
    Expires
    Jun 11, 2014

    See this permit on One Stop

  20. Permit Electrical Service / Circuit / Feeder Permit Issued

    RENOVATIONS- 13-30902

    Permit
    13-35235-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $123
    Contractor
    Kirk S Wright
    Days from application to issue
    0
    Expires
    Feb 21, 2014

    See this permit on One Stop

    Placed here by its tax bill number from “837 Barracks St”.

  21. Permit VCC General Work Permit Issued

    general improvements to courtyard

    Permit
    13-32138-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $750
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jan 25, 2014

    See this permit on One Stop

  22. Permit General Mechanical Permit Issued

    gas line, meter out over six month and gas w/h. kevin tillery (#R105717857410) 13-09399-rnvn

    Permit
    13-31818-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    T Tillery T T Kevin
    Days from application to issue
    0
    Expires
    Jan 23, 2014

    See this permit on One Stop

  23. Permit Renovation (Non-Structural) Occupancy

    Remodel Kitchens and Baths

    Permit
    13-30902-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $110
    Days from application to issue
    9
    Expires
    Jan 25, 2014

    See this permit on One Stop

  24. Permit Electrical Service / Circuit / Feeder Permit Issued

    RENOVATIONS- 13-09399

    Permit
    13-14915-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $175
    Contractor
    Kirk S Wright
    Days from application to issue
    0
    Expires
    Nov 14, 2013

    See this permit on One Stop

  25. Permit General Mechanical Permit Finaled

    install 3-elec waf and 3-condenser. jerry howard (#338561743 5 ) 13-09399-RNVN

    Permit
    13-13381-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $154
    Contractor
    Jerry Howard
    Days from application to issue
    301
    Expires
    Aug 25, 2014

    See this permit on One Stop

  26. Permit Renovation (Non-Structural) In Review

    Remodel Kitchen and Bathrooms

    Permit
    13-09399-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60

    See this permit on One Stop

  27. Permit VCC Paint Permit Issued

    -Paint to match existing • Walls...masonry is not to be painted • Wooden elements including doors, windows, trim...White, semigloss • Shutters…French Quarter Green, semigloss • Balcony Decking…Grey • Ironwork ...Black

    Permit
    13-09450-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 27, 2013

    See this permit on One Stop

  28. Permit VCC General Work Permit Issued

    - Replace existing courtyard gate with new three leaf 18 panel gate - Widen the existing opening to 8'-6" in width to accommodate the new gate - Remove planter in courtyard and repave to match existing adjacent materials

    Permit
    13-04480-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 14, 2013

    See this permit on One Stop

  29. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit General User: RPELL Tracking: 86168223022 Status: Permit Issued Status Date: 4/2/2012 12:00:00 AM Owner: Frank Valls Owner Edited By: 4/3/2012 by RPELL

    Permit
    VCCP-12-0327
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

    Placed here by a known alternate street name from “841 Barracks”.