French Quarter

1310 Dauphine Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 21 permits on record here; the most recent, a VCC general work permit, was filed in November 2026. 13 are still open. On this block in the past year: 1 request to 311 and 14 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
1,413 sq ft
Parcel
41021865

Everything on record here

21 records, newest first · 13 open

  1. Permit VCC General Work Permit Issued

    replace broken slates where necessary, to match existing in size, shape and color remove and replace cracked stucco on parapet walls, replace using VCC mortar mix **coat parapet walls with breathable Siloxane if necessary. Must be clear in color. remove vegetation

    Permit
    26-32265-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    May 5, 2027
    1. Final VCC
    2. Application Submitted Complete
    3. Application Review Complete
    4. Permit Approved Complete
    5. Permit Issued Complete
    6. Vieux Carré Commission Approved

    See this permit on One Stop

  2. Permit Renovation (Structural or Non-structural) In Review

    Minor slate and mortar repairs throughout the roof. Repair stucco on parapet walls NOTE: Re-roofing work does not require an inspection from Safety & Permits. Instead, upload the following geotagged photos to the permit: 4 geotagged photos (one from each side) showing:   – Removal of existing roof material   – Installation of water‑intrusion‑resistant underlayment   – Installation of drip edge and flashing   – Installation of shingles or metal panels After uploading all applicable photos, email to request permit closure.

    Permit
    26-32265-RENO
    Type
    Renovation (Structural or Non-structural)
    Work
    Renovation (Structural or Non-structural)
    Estimated cost (applicant’s figure)
    $0
    Fees
    $270
    Contractor
    GUARANTY SHEET METAL WORKS INC
    1. VCC Review Unpaid
    2. Building Unpaid
    3. Building Plan Review Unpaid
    4. Application Submitted Complete
    5. Permit Intake Pending
    6. Parks and Parkways Tree Review Pending
    7. Application submitted
    8. Zoning Review Complete
    9. Zoning Complete
    10. Zoning review

    See this permit on One Stop

  3. Permit VCC General Work Permit Cancelled

    Kitchen & bath remodel, replacing tile and cabinets and fixtures with new at existing locations, demo, plumbing, sheetrock, doors, flooring. No structural under this permit.

    Permit
    20-48033-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    26
    Expires
    Jul 24, 2021

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) Occupancy

    Kitchen & bath remodel, replacing tile and cabinets and fixtures with new at existing locations, interior demo, plumbing, sheetrock, doors, flooring. No structural under this permit. No exterior work under this permit.

    Permit
    20-48033-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $67,000
    Fees
    $395
    Contractor
    Chuck Ransdell
    Days from application to issue
    105
    Expires
    Sep 16, 2021
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  5. Permit VCC Paint Other

    shutters: narragansett green HC-157, semigloss walls: BM 978 Racoon hollow, flat or eggshell doors, windows and trim: cloud cover 855, semigloss ironwork: black, semigloss Repair/repaint balconies and windows where needed repoint masonry where needed using VCC approved mortar and stucco mix (see attached)

    Permit
    19-07847-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    19
    Expires
    Oct 1, 2019

    See this permit on One Stop

  6. Permit VCC Security Camera Application In Review

    Install 2 Nest IQ exterior security cameras, one under front balcony and one on rear wall

    Permit
    19-07719-VCCAM
    Type
    VCC Security Camera Application
    Work
    VCC Security Camera Application
    Estimated cost (applicant’s figure)
    $800
    Fees
    $0

    See this permit on One Stop

  7. Permit VCC General Work Other

    Secure existing counterflashing as needed. Adjust and paint existing fascia on back left side as needed, to match existing.

    Permit
    19-06281-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    55
    Expires
    Oct 24, 2019

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Other

    Minor Repairs: Resecure counter flashing / adjust and paint fascia on back left side

    Permit
    19-06281-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $575
    Fees
    $98
    Contractor
    Robertson Roofing and Siding, Inc
    Days from application to issue
    73
    Expires
    Nov 9, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  9. Permit VCC General Work Other

    Install wood seven-board fence and gate in rear courtyard per standard detail and attached materials stamped VCC approved 04/24/19. All exposed wood must be painted Benjamin Moore Narragansett Green HC-157, semigloss. Paint hardware to match fence and gate.

    Permit
    19-03488-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    78
    Expires
    Oct 24, 2019

    See this permit on One Stop

  10. Permit Renovation (Non-Structural) Other

    Construct 7-board painted fence with gate in rear courtyard on property line.

    Permit
    19-03488-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,400
    Fees
    $135
    Contractor
    Ransdell Restorations LLC
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Permit approved

    See this permit on One Stop

  11. Permit VCC General Work Other

    repair maonry were needed To repoint masonry utilizing mortar mixed and applied per the VCC standard detail sheet (attached) Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). balcony repair where needed All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.

    Permit
    19-00271-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Jul 8, 2019

    See this permit on One Stop

  12. Permit Renovation (Non-Structural) Other

    Minor repairs to masonry and balcony

    Permit
    19-00271-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,800
    Fees
    $70
    1. Application submitted

    See this permit on One Stop

  13. Permit VCC General Work Permit Finaled

    To repair existing natural slate roof and copper gutters of main building as per materials stamped VCC approved 07/30/18. Work includes: Cleaning and resealing seams in existing blind gutter Replacing existing 1-1/2” lead flange with new 1-1/2” lead flange Installing new matching slate around the replaced flange

    Permit
    18-24665-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Jan 30, 2019

    See this permit on One Stop

  14. Permit Renovation (Non-Structural) Occupancy

    Minor Roof repair - replace lead flange on slate roof / Gaco in blind gutter

    Permit
    18-24665-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,260
    Fees
    $105
    Contractor
    Robertson Roofing and Siding Inc
    Days from application to issue
    35
    Expires
    Feb 28, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  15. Permit VCC General Work Permit Issued

    To construct new wooden, horizontal-board fence, per AC approval of 03/25/14, and materials received 03/12/14 & 04/24/14 & stamped VCC approved 04/24/14.

    Permit
    14-12793-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    34
    Expires
    Oct 24, 2014

    See this permit on One Stop

  16. Permit General Mechanical Permit Finaled

    3-electric waf/ ac/ Stephen812-8837/ 302for350/ ck1357

    Permit
    14-07199-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    Stephen H Johnson
    Days from application to issue
    47
    Expires
    Oct 23, 2014

    See this permit on One Stop

  17. Permit VCC General Work Permit Issued

    -Remove existing HVAC condenser & replace with mini-split unit in same location in side alley per cut sheet submitted and stamped approved 03/07/14.

    Permit
    14-07307-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Stephen H Johnson
    Days from application to issue
    0
    Expires
    Sep 7, 2014

    See this permit on One Stop

  18. Permit Electrical

    INCREASE OF SERVICE SINGLE-FAMILY DWELLING DAN CASADABAN

    Permit
    E01006022
    Type
    Electrical
    Days from application to issue
    0
  19. Permit Electrical

    BUILDING RENOVATIONS SINGLE-FAMILY DWELLING DAN CASADABAN

    Permit
    E01001926
    Type
    Electrical
    Days from application to issue
    0
  20. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING INSTALL ELEC WARM AIR FURNACE AND 3-TON A\C SYSTEM. KENNETH ROBERT 282-0625

    Permit
    M01001294
    Type
    Mechanical
    Days from application to issue
    0
  21. Permit Building

    GENERAL REPAIRS SINGLE-FAMILY DWELLING REPAIRS TO EXIST SFD TO INCL: DOOR, WIND OWS, REMOVE BALCONY STAIR, INFILL SIDE WALL, PLANTERS, INSTALL NEW SLATE ROOF, ELECTRICAL, TIE RODS AS PER VCC #001050.

    Permit
    B01000596
    Type
    Building
    Days from application to issue
    0