French Quarter

806 Esplanade Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 17 permits on record here; the most recent, a VCC general work permit, was filed in January 2025. 13 are still open. On this block in the past year: 16 requests to 311 and 128 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
6,324 sq ft
Parcel
41021900

Everything on record here

17 records, newest first · 13 open

  1. Permit VCC General Work Permit Issued

    To repair vehicle damaged gate and masonry as per materials stamped VCC approved 01/31/2025. Work includes: • Rebuilding prick pillar utilizing salvaged bricks as much as possible and matching bricks as needed • All mortar to be mixed as per VCC standard details • Reinstalling existing gate and painting to match existing

    Permit
    25-02448-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Jul 31, 2025

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) In Review

    Renovation to an existing single family home. Repair of driveway gate and brick pillar that were damaged by a hit and run driver. To be done as per scope.

    Permit
    25-02448-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $155
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  3. Permit VCC General Work Permit Issued

    ***ALL WORK TO MATCH EXISTING IN MATERIAL, SIZE, SHAPE AND REVEAL to repair of deteriorated porch stairs by replacing old boards with new wooden stair treads to match existing. to repair rotten stair post with new wood to match existing. to repair column base with new wood base to match existing. remove and replace rotten porch boards and replace with new tongue and groove word boards to match existing. Clean and paint entire porch, stairs and posts to match existing.

    Permit
    24-02241-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Jul 30, 2024

    See this permit on One Stop

  4. Permit Renovation (Structural) Permit Issued

    1) Repair of rotten porch stairs by replacing old boards with new wooden stair treads to match existing. 2) Repair rotten stair post with new wood to match existing. 3) Repair column base with new wood base to match existing. Locally remove and replace rotten porch boards and replace with new tongue and groove word boards to match existing. 4) Clean and paint entire porch, stairs and posts to match existing.

    Permit
    24-02241-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $1,280
    Fees
    $195
    Days from application to issue
    47
    Expires
    Sep 11, 2024
    1. Application submitted
    2. Zoning review
    3. Application review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  5. Permit VCC General Work Permit Issued

    ***ALL WORK ON REAR SECTION OF BUILDING To replace damaged siding and repaint to match. all work to match exisitng. Hardie board siding is not allowed in the VCC

    Permit
    23-01351-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jul 23, 2023

    See this permit on One Stop

  6. Permit Renovation (Structural) Application Accepted

    ***ALL WORK ON REAR SECTION OF BUILDING To replace damaged siding and repaint to match. all work to match exisitng. Hardie board siding is not allowed in the VCC

    Permit
    23-01351-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $500
    Fees
    $188
    1. Application submitted

    See this permit on One Stop

  7. Permit Small Cell Installation Other

    Multi-Carrier Small Cell Installation – Replace Existing Lamp Post

    Permit
    21-04749-SMCL
    Type
    Small Cell Installation
    Work
    Small Cell Installation
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    1. Application submitted

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Other

    Resolution of Non Conforming VCC Items Case #: 19-10899-VCCNOP

    Permit
    19-39033-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,000
    Fees
    $98
    1. Application submitted

    See this permit on One Stop

  9. Permit VCC Paint Other

    ALL COLORS TO MATCH EXISTING Walls...Ultra Pure White 5050 Behr Shutters...French Quarter Green Deep Base 5340 Behr Decking...Slate Gray 6695 Behr NOTE: All shutter hardware to match adjacent surface; hinge attached to shutter should match shutter color, and hinge attached to trim should match trim. Shutter hardware should not be painted black. Additionally, outriggers under balconies or galleries should be painted white as they are not decorative ironwork elements. Failure to exactly match permit specified colors will result in a VCC violation and mandated repainting.

    Permit
    18-38144-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    May 20, 2019

    See this permit on One Stop

  10. Permit VCC General Work Permit Issued

    Repairs to green-rated building: Repair deteriorated wood posts at front steps, to match existing. Paint white, semigloss. Remove/replace any deteriorated wood decking and steps, as needed, on rear porch, to match existing. Paint top and sides gray, semigloss. (If underside is exposed, paint white, semigloss). Paint new materials to match existing, semigloss finish.

    Permit
    18-17894-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    8
    Expires
    Dec 7, 2018

    See this permit on One Stop

  11. Permit Renovation (Structural) Permit Issued

    Repair single - repair post at front steps, repair rear 1 story porch replacing all rotten materials, install new steps leading to porch matching paint to original color of house per sketch and VCC.

    Permit
    18-17894-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $1,800
    Fees
    $105
    Days from application to issue
    9
    Expires
    Dec 7, 2018
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Permit approved
    5. Issue date

    See this permit on One Stop

  12. Permit VCC General Work Permit Issued

    Installation of 6 Swann 1080p Hi Def cameras SWNHD-820CAM per application and materials recieved 7/26/17 and 8/1/17 respectively and stamped VCC approved 8/2/17.

    Permit
    17-24101-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    7
    Expires
    Feb 2, 2018

    See this permit on One Stop

  13. Permit Renovation (Non-Structural) Other

    This request is for permission to install surveillance cameras on the residence at 806 Esplanade Avenue. An attachment with photos and description will be attached to this request.

    Permit
    17-24101-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,009
    Fees
    $113

    See this permit on One Stop

  14. Permit VCC General Work In Review

    Install a 2" steel post behind the AC units in the courtyard on the Bourbon elevation and relocate a satellite dish from the house to the post.

    Permit
    17-15947-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  15. Permit VCC General Work Permit Issued

    Remove existing roofing material Repair and/or replace underlayment as necessary Install new Vermont slate (grey/green), using copper nails Install new copper flashing on all 5 chimneys and sidewalls Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets is not allowed

    Permit
    16-17683-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 26, 2016

    See this permit on One Stop

  16. Permit VCC Paint Permit Issued

    To prepare for painting by washing using a low water pressure; sanding (rotary sanders cannot be used); making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft with Portland cement content not to exceed 1 part to 12); and to paint as follows to match existing conditions: • Walls/trim...White, flat or eggshell finish • Shutters...Taliaferro Green, semigloss • Porch/deck/steps...Grey Minor repair/replacement of gutter as necessary to match existing also approved. Satellite dish to be removed and applied for prior to installation.

    Permit
    15-00011-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    6
    Expires
    Jul 12, 2015

    See this permit on One Stop

  17. Permit VCC General Work Permit Issued

    To install chimney flashing as follows: • Remove existing slate, flashing & mortared boots from around chimneys • Apply underlayment, install copper flashing & new slate as necessary • Rivet & seal all seams and termination channels as necessary • All work to match existing conditions & to conform to VCC guidelines

    Permit
    12-23144-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Feb 24, 2013

    See this permit on One Stop