French Quarter

824 Esplanade Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 9 permits on record here; the most recent, a VCC general work permit, was filed in February 2026. 6 are still open. On this block in the past year: 16 requests to 311 and 128 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
11,669 sq ft
Parcel
41021902

Everything on record here

9 records, newest first · 6 open

  1. Permit VCC General Work Other

    Repair existing foundation and add new piers as indicated, per attached materials stamped VCC approved 05/22/2026. Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled and/or repointed masonry must be properly "toothed in" to existing masonry using VCC mortar formula (attached). No structural work to be visible on the exterior of the property.

    Permit
    26-04537-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    98
    Expires
    Nov 22, 2026

    See this permit on One Stop

  2. Permit Renovation (Structural) Other

    Pier & Beam Foundation Repair work

    Permit
    26-04537-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $37,800
    Fees
    $310
    Contractor
    Academy House Leveling
    Days from application to issue
    115
    Expires
    Dec 8, 2026
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

    Placed here by an address range from “824-830 Esplanade Ave”.

  3. Permit VCC Paint Other

    Install new 6" half round aluminum gutters and 6 inch downspouts in existing locations. Paint gutters white, semigloss. Paint downspouts to match adjacent brick surface, to minimize visibility.

    Permit
    22-36694-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    8
    Expires
    Jun 16, 2023

    See this permit on One Stop

  4. Permit VCC General Work Other

    To replace roof following hurricane damage, retaining some existing flashing, gutters and downspouts, etc. per attached materials stamped VCC approved 09/06/2022: Remove existing roofing materials Repair and/or replace underlayment and ice & water shield as necessary Install new 18” x 12” x <3/8” natural slate (grey/green) on roof and dormer cheek walls, using copper nails Install new galvanized valley flashing, lead plumbing vents, and galvanized step flashing at roof to wall transitions. Retain existing galvanized counterflashing. Install prefinished metal drip edge at existing gutters, in finish to match galvanized metal. Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. NOTE: Existing galvanized cap flashing is prescribed, but may not be removed or replaced without permit. Future removal will require compliance with current VCC Design Guidelines and standards for mortar parapet caps.

    Permit
    22-22501-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    39
    Expires
    Mar 6, 2023

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) In Review

    Roof Replacement: Remove/Replace existing roof and dormer sidewalls with ½” natural slate (Color: semi weathering green) using copper nails. Detach/Reset existing terra-cotta ridge caps. Install synthetic underlayment, new galvanized valley flashing, replace lead plumbing vents and new galvanized step flashing at roof to wall transitions. Re-use existing galvanized counter-flashing, metal wall panels and parapet cap. Install ice & water shield at roof to wall transitions, in valleys and at all penetrations. Provide/Install standard drip edge (Color: T.B.D.). Dispose of debris. Haul away.

    Permit
    22-22501-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $83,064
    Fees
    $846
    Contractor
    Perdomo Roofing and Sheet Metal, LLC
    1. Application submitted
    2. Application review
    3. Zoning review

    See this permit on One Stop

  6. Permit VCC Paint Permit Issued

    Walls...Ligonier Tan, SW 2191 (to match existing), flat or eggshell finish Trim including door and window frames, doors, windows, iron security gate...Eaglet Beige, SW 2193 (to match existing), semigloss Permit extended 1/11/17 until 6/31/17.

    Permit
    16-16008-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Nov 16, 2016

    See this permit on One Stop

  7. Permit VCC General Work Permit Issued

    Remove existing Maxislate by Eternit faux slate roofing from rear slope of main house, apply new 30-lb. felt, and reinstall slates, replacing in kind when necessary, per application received 5/15/13

    Permit
    13-15561-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $8,000
    Fees
    $0
    Contractor
    Neal Brennan
    Days from application to issue
    0
    Expires
    Nov 17, 2013

    See this permit on One Stop

  8. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit General User: CABERG Tracking: Status: Permit Issued Status Date: 6/18/2012 12:00:00 AM Owner: Held Judy Owner Address: 826 Esplanade Ave, New Orleans, LA 70116 Owner Edited By: 6/18/2012 by CABERG NOTE: Permit issued in response to violations. Work shall commence no less than 30 days after permit is issued. Work must be completed no less than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. -To remove non-conforming waterproofing mortar substitute, installed in error, from front elevation of residence, and replace with appropriate mortar, per VCC Masonry Guidelines

    Permit
    VCCP-12-0573
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  9. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit General User: TMCLEOD Tracking: 86112298878 Status: Permit Issued Status Date: 4/17/2012 12:00:00 AM Owner: Judy Held Owner Address: 826 Esplanade Ave, New Orleans, LA 70116 Owner Phone: 524.8165 Owner Edited By: 4/17/2012 by TMCLEOD

    Permit
    VCCP-12-0359
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop