French Quarter

1026 Esplanade Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 23 permits on record here; the most recent, a VCC paint permit, was filed in February 2025. 15 are still open. On this block in the past year: 12 requests to 311 and 55 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
3,487 sq ft
Parcel
41021914

Everything on record here

23 records, newest first · 15 open

  1. Permit VCC Paint Permit Issued

    ALL COLORS TO MATCH EXISTING THIS PERMIT ONLY COVERS MINOR REPAIRS, If more large scale repairs are needed, the applicant must apply for a building permit.

    Permit
    25-05052-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    RONALD RICHBURG PAINTING & CARPENTER WORK
    Days from application to issue
    0
    Expires
    Aug 18, 2025

    See this permit on One Stop

  2. Permit Electrical Repair / Replacement / Addition Permit Finaled

    200 AMP SERVICE - SAME DAY DISCONNECT/RECONNECT

    Permit
    21-13095-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $7,494
    Fees
    $100
    Contractor
    William Floyd Schell III
    Days from application to issue
    5
    Expires
    Nov 11, 2021
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  3. Permit Street Cut Other

    1-2 foot by 65 foot trench to install new electrical conduit for service conversion for 1026 Esplanade.

    Permit
    21-08800-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Entergy Elect (ENOI)
    Days from application to issue
    22
    Expires
    Oct 20, 2021

    See this permit on One Stop

  4. Permit VCC General Work Permit Cancelled

    Run underground electric service from Entergy feed to residence. Will require trenching in driveway from sidewalk to residential electrical meter. Flagstone drive will require removal and reinstallation.

    Permit
    21-03281-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    57
    Expires
    Oct 7, 2021

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Issued

    Run underground electric service from Entergy feed to residence. Will require trenching in driveway from sidewalk to residential electrical meter. Flagstone drive will require removal and reinstallation.

    Permit
    21-03281-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $8,787
    Fees
    $158
    Days from application to issue
    63
    Expires
    Oct 7, 2021
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  6. Permit VCC General Work Other

    Repair of existing wood fencing

    Permit
    20-22689-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 19, 2020

    See this permit on One Stop

  7. Permit VCC General Work Permit Issued

    Repair/replace deteriorated wood railing and newel posts on the second floor banister, as needed, to match existing using Spanish cedar or mahogany wood. Paint to match existing in color and finish. Balcony rail: Benjamin Moore "Standish White", HC-32 semigloss. Decorative accents: Benjamin Moore : Silver Pine", AC-21, semigloss. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.

    Permit
    19-13317-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Nov 16, 2019

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Other

    Repair/replace deteriorated wood railing and newel posts on the second floor banister, as needed, to match existing. Must match existing in color, size, material, detail, profile and exposure, using Spanish cedar or mahogany wood. Paint to match existing in color and finish. Most recent VCC paint permit (18-17805): Balcony rail: Benjamin Moore "Standish White", HC-32 semigloss. Decorative accents: Benjamin Moore : Silver Pine", AC-21, semigloss.

    Permit
    19-13317-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    1. Application submitted

    See this permit on One Stop

  9. Permit VCC General Work Other

    Repoint masonry on chimneys, as needed, using VCC mortar formula (attached). Repair/replace flashing around chimneys as needed, to match existing. NOTE: Chimney cap flashing is not approved. Mortar: No more than: • 1 part Portland Cement, to • 3 parts lime, • 9 parts sand, and • enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white to beige but should not be grey in color. When repointing, all mortar to be tooled to match existing joint profiles. Consult with VCC staff if existing joint profile indeterminate.

    Permit
    19-05724-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    11
    Expires
    Sep 4, 2019

    See this permit on One Stop

  10. Permit Renovation (Non-Structural) Other

    Repoint masonry on chimneys, as needed, using VCC mortar formula (attached). Repair/replace flashing around chimneys as needed, to match existing. NOTE: Chimney cap flashing is not approved. Mortar: No more than: • 1 part Portland Cement, to • 3 parts lime, • 9 parts sand, and • enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white to beige but should not be grey in color. When repointing, all mortar to be tooled to match existing joint profiles. Consult with VCC staff if existing joint profile indeterminate.

    Permit
    19-05724-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $9,300
    Fees
    $110
    Contractor
    Theodore Pierre Jr
    1. Application submitted

    See this permit on One Stop

  11. Permit VCC General Work Permit Issued

    Repair/replace deteriorated wood railing and newel posts on the second floor banister, as needed, to match existing. Must match existing in color, size, material, detail, profile and exposure, using Spanish cedar or mahogany wood. Paint to match existing in color and finish. Most recent VCC paint permit (#07-0116): Balcony rail: Benjamin Moore "Standish White," HC-32 semigloss Decorative accents: Benjamin Moore "Silver Pine," AC-21, semigloss

    Permit
    18-17805-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    8
    Expires
    Dec 7, 2018

    See this permit on One Stop

  12. Permit Renovation (Non-Structural) Other

    Repair rotten railing and newel posts on the second floor banister.

    Permit
    18-17805-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,850
    Fees
    $105
    1. Application submitted
    2. Application review

    See this permit on One Stop

  13. Permit VCC General Work Permit Issued

    Re-point 30 linear feet of existing brick wall on the Rampart elevation usuing VCC approved mortar (see attached). All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). Cracked or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted.

    Permit
    17-16916-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Nov 19, 2017

    See this permit on One Stop

  14. Permit Renovation (Non-Structural) Other

    Re-point 30 linear feet of existing brick wall as per proposal and VCC Approval.

    Permit
    17-16916-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,880
    Fees
    $173
    Contractor
    Theodore Pierre Jr

    See this permit on One Stop

  15. Permit VCC General Work Permit Issued

    To install new solid iron handrail with lambs tongue, on N. Rampart side of front entrance steps, per Architectural Committee approval on 12/13/16, and materials stamped VCC approved 01/30/17.

    Permit
    16-39071-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    63
    Expires
    Jul 30, 2017

    See this permit on One Stop

  16. Permit Driveway/ Curb Cut and Restoration Other

    Provide curb cut and driveway to vacant lot on Esplanade as per attached sketch.

    Permit
    16-02539-RDRV
    Type
    Driveway/ Curb Cut and Restoration
    Work
    Driveway/ Curb Cut and Restoration
    Estimated cost (applicant’s figure)
    $0
    Fees
    $165

    See this permit on One Stop

    Placed here by its tax bill number from “1100 Block of Esplanade Ave”.

  17. Permit VCC Paint Permit Issued

    Overhang on Burgundy side of building....Brunswick Beige 1061

    Permit
    14-21843-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    13
    Expires
    Jan 14, 2015

    See this permit on One Stop

  18. Permit VCC General Work Permit Issued

    -Install three (3) security cameras per application, cutsheets and photograph submitted 08/30/13 & stamped approved 09/03/13.

    Permit
    13-36509-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Mar 3, 2014

    See this permit on One Stop

  19. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    REPAIRS

    Permit
    09ELC-07324
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    L.P.Bowers Elect Inc
    Days from application to issue
    10
  20. Permit Residential APPROVAL

    katrina repairs

    Permit
    ACCELA-75380
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $75,000
  21. Permit Electrical

    GENERAL REPAIRS SINGLE-FAMILY DWELLING LAWRENCE BOWERS B03002515

    Permit
    E03005579
    Type
    Electrical
    Days from application to issue
    0
  22. Permit Building

    SUPPLEMENT TO OUTSTANDING PERMIT SINGLE-FAMILY DWELLING SUPPLEMENT TO PERMIT B03002515 TO INCREASE THE SCOPE & VALUE OF WORK - EXT WORK TO EXISTING SINGLE PER VCC # 030215 & ATTACHED PROPOSAL.

    Permit
    B03002515
    Type
    Building
    Days from application to issue
    0
  23. Permit Building

    GENERAL REPAIRS SINGLE-FAMILY DWELLING REPAIR FOUNDATION AS PER VCC PERMIT # 030277

    Permit
    B03002153
    Type
    Building
    Days from application to issue
    0