French Quarter

1032 Esplanade Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 15 permits on record here; the most recent, a street cut permit, was filed in August 2019. 10 are still open. On this block in the past year: 12 requests to 311 and 55 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
3,486 sq ft
Parcel
41021915

Everything on record here

15 records, newest first · 10 open

  1. Permit Street Cut Other
    Permit
    19-26577-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $243
    Days from application to issue
    254
    Expires
    Nov 1, 2020

    See this permit on One Stop

  2. Permit VCC General Work Application Accepted

    Replace existing exterior stairs to rear balcony as per shop drawings.

    Permit
    17-07039-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) Other

    Replace existing exterior stairs to rear balcony as per shop drawings.

    Permit
    17-07039-NEWC
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $14,081
    Fees
    $293
    Contractor
    Central City Millworks LLC

    See this permit on One Stop

  4. Permit VCC General Work Permit Issued

    To replace the alleyway door on the Burgundy side of the main building, to match existing To replace the balcony post closest to N Rampart on the second floor of the rear service building, to match existing To replace top porch rail of second floor service building balcony, to match existing NOTE: Existing bottom rail and spindles to be reused To replace window sill on the Barracks elevation of the main building All work as per plans submitted 11/01/16 and stamped VCC approved 11/01/16. NOTE: All existing hardware to be reinstalled to match existing locations and functions. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.

    Permit
    16-31237-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    37
    Expires
    May 2, 2017

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Other

    Replace side "gate" solid door; replace rotted post; replace rotted top handrail; replace window sill - all as per shop drawings.

    Permit
    16-31237-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $13,667
    Fees
    $195
    Days from application to issue
    121
    Expires
    Jul 20, 2017

    See this permit on One Stop

  6. Permit VCC General Work Permit Finaled

    -Replace existing bullet-style security cameras with dome-style security cameras per spec sheets submitted 08/27/13 & stamped approved 08/27/13.

    Permit
    13-35968-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    6
    Expires
    Feb 28, 2014

    See this permit on One Stop

  7. Permit VCC General Work Permit Finaled

    To install a security system as follows, per attached material received 06/21/13 & stamped VCC approved 06/28/13: • Three (3) bullet cameras attached to the soffit at the rear of the facade gallery pointing toward the street; and one (1) bullet camera attached at the rear of the façade gallery, pointing toward the downriver side alley. • Each camera will measure 2.48” x 2.28” x 4.06”& will be painted to match the surface to which it is attached. • One (1) intercom (measuring 5-1/8” x 3-7/8” x 1-9/16”) attached to the frame of the passageway gate, downriver elevation.

    Permit
    13-28990-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Dec 28, 2013

    See this permit on One Stop

  8. Permit VCC General Work Permit Issued

    • To repair the stucco on the side wall of the main house as necessary, using the VCC standard “soft” mortar mix with the Portland cement content not to exceed 1 part to 12 • To touch-up paint as necessary to match existing color (Pink, BM-016, flat or eggshell finish)

    Permit
    13-08075-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 14, 2013

    See this permit on One Stop

  9. Permit VCC Paint Other

    Historical Import Type: Enforcement VCC Permit Paint User: HIRVIN Tracking: 86114935552 Status: Permit Issued Status Date: 2/29/2012 12:00:00 AM Owner: Garber Charles M Jr Owner Address: 1032 Esplanade Ave, New Orleans, LA 70116 Owner Edited By: 2/29/2012 by HIRVIN Tto paint as follows, per attached chips: 1. Walls...Pink, 016, flat or eggshell finish 2. Trim including doors, windows, frames, gallery columns, fascia boards and ceiling, service building gallery components...Brilliant White, semigloss 3. Shutters...Timber Wolf, 1600, semigloss 4. Foundation...Steel Wool, 2121-20 5. Ironwork...Wrought Iron, 2124

    Permit
    VCCP-12-0191
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  10. Permit General Mechanical Inspection - Completed

    ELEC WAF AND 3-TON A\C. CHRIS LACOSTE (#5308)

    Permit
    05MCH-02425
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Contractor
    Lacoste Htg & A/C
    Days from application to issue
    5
  11. Permit Mechanical Permit Issuance Active

    new line danny 415-6853 #14460

    Permit
    05MCH-01790
    Type
    Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $15
  12. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-01758
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    No Static Electric ,Inc.
    Days from application to issue
    10
  13. Permit Renovation (Non-Structural) Inspection - Completed No Requirements

    Renovations of a 2 story single family dwelling as per plans and VCC Permit #:050061.Electrical,Hvac and Plumbing.REAR SERVICE BUILDING.

    Permit
    05BLD-00252
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $170,000
    Fees
    $1,605
    Days from application to issue
    28
  14. Permit Residential

    Interior demolition of a 2 story single family dwelling.Renovation plans to follow.No use and occupancy.

    Permit
    05BLD-00250
    Type
    Residential
    Work
    Demolition
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $0
  15. Permit Residential Permit Issuance Active

    Interior demolition of a 2 story single family.No use and occupancy.Plans to follow.

    Permit
    05BLD-00251
    Type
    Residential
    Work
    Repair
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $65