French Quarter

600 Ursulines Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 22 permits on record here. 7 are still open. There was 1 past code enforcement case, the latest in June 2012, all closed. On this block in the past year: 2 requests to 311 and 55 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
3,081 sq ft
Parcel
41022038

Everything on record here

23 records, newest first · 7 open

  1. Permit Permit Application Review

    Wallace Parade

    Permit
    26-32795-SPMA
    1. Application submitted
    2. Application review

    Placed here by its map location from “1100 Chartres St”.

  2. Permit VCC Paint Permit Issued

    to preform minor stucco repair and repaint the body of the house only, no trim painting, no color change. Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: • no greater than 1:12 part Portland Cement, to • 3 parts lime, and • 9 parts sand, • 6 lbs./cubic yard hair or fiber, and • enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: • No more than 1 Part Portland cement, • 3 Parts Lime, • 9 Parts Sand, • Enough water to form a workable mix. PREPACKAGED MIXES ARE NOT PERMITTED. LATH OF ANY KIND IS NOT ALLOWED

    Permit
    26-08820-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    C-Mack Enterprises LLC
    Days from application to issue
    1
    Expires
    Sep 26, 2026

    See this permit on One Stop

  3. Permit VCC Security Camera Application Other

    To install two turret style security cameras mounted to the underside of the abat-vent per materials stamped VCC approved 02/28/2025. • Cameras shall be painted to match the attached surface or prefinished to match the attached service • Cameras are to be mounted flush on the building. Conduit boxes and wires should not be visible. • Mounting arms are not allowed. • All wiring shall be placed in conduits and located as discretely as possible. • All conduits to be placed along the inside corners of building surfaces as much as possible and painted to match the adjacent surfaces. • All cameras to be installed a minimum of 9-feet above the sidewalk and a maximum of 18-inches below the bottom of the balcony, gallery, porch ceiling, roof overhang, or soffit.

    Permit
    25-05679-VCCAM
    Type
    VCC Security Camera Application
    Work
    VCC Security Camera Application
    Estimated cost (applicant’s figure)
    $1,800
    Fees
    $0
    Contractor
    C-Mack Enterprises LLC
    Days from application to issue
    8
    Expires
    Aug 28, 2025

    See this permit on One Stop

  4. Permit VCC Paint Other

    To replace existing standing seam metal of abat-vent with new standing seam copper metal roofing as per materials stamped VCC approved 07/24/2024. The underside of metal to be painted white to match existing. No changes to be made to the structure or fascia of the abat-vent Outline/dimensions of new copper roofing to match existing metal profile

    Permit
    24-20695-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    C-Mack Enterprises LLC
    Days from application to issue
    16
    Expires
    Jan 24, 2025

    See this permit on One Stop

  5. Permit VCC General Work Permit Cancelled

    Replace existing panel

    Permit
    23-25738-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Mar 18, 2024

    See this permit on One Stop

  6. Permit Electrical Service / Circuit / Feeder Other

    Replace existing panel

    Permit
    23-25738-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Todd Alexander Dolce
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  7. Permit VCC General Work Permit Finaled

    Install 9 light fixtures and adding 1 circuit

    Permit
    23-21473-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Feb 25, 2024

    See this permit on One Stop

  8. Permit Electrical Repair / Replacement / Addition Permit Cancelled

    Install 9 light fixtures and adding 1 circuit

    Permit
    23-21473-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Contractor
    Todd Alexander Dolce
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  9. Permit VCC General Work Other

    To repave courtyard as per materials stamped VCC approved 09/09/2022 Work includes: • Removal of existing concrete paving and substrate as needed • Installation of reclaimed brick in a basket weave pattern on a bed of compacted gravel and masonry sand • Courtyard to be sloped to drain towards to gate entrance

    Permit
    22-27391-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Mar 9, 2023

    See this permit on One Stop

  10. Permit Electrical Service / Circuit / Feeder Permit Cancelled

    Install 70 amp disconnect

    Permit
    22-01396-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $88
    Contractor
    Timothy J Carman
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  11. Permit Street Cut Other

    Replace existing lamp post with 5g capable lamp post.

    Permit
    21-32647-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $3,303
    Contractor
    Timothy Jason Carman
    Days from application to issue
    17
    Expires
    Jun 9, 2022

    See this permit on One Stop

  12. Permit VCC General Work In Review

    To complete renovations of existing swimming pool as per materials stamped VCC approved 08/02/2021. Work includes: Removal of existing pool plaster, tile, coping, filter, and pump Construction of ne concrete coping, 6” x 6” tile, and dark blue plaster Installation of new pool filter and pump in same location as existing and same size (or smaller) as existing NOTE: This permit is to resolve a violation concerning work begun without a permit for which a STOP WORK ORDER was issued. Work shall commence no more than 30 days after permit is issued. Work must be completed no more than 60 days after work begins. Owner will call VCC for final inspection upon completion of work.

    Permit
    21-21747-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Feb 2, 2022

    See this permit on One Stop

  13. Permit Swimming Pool Permit Issued

    Renovation of an existing pool including new plaster, tile, coping, filter, and pump. The size and shape of the pool will not change. This is a cosmetic update. *see journal notes

    Permit
    21-21747-POOL
    Type
    Swimming Pool
    Work
    Swimming Pool
    Estimated cost (applicant’s figure)
    $9,500
    Fees
    $330
    Contractor
    C-Mack Enterprises LLC
    Days from application to issue
    27
    Expires
    Feb 23, 2022
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  14. Permit Street Cut Other

    AT&T directional bore and trench and place 1-2" conduit and a new 17" x 30" Hand Hole

    Permit
    21-20966-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Grady Crawford Construction Company LLC
    Days from application to issue
    8
    Expires
    Jan 28, 2022

    See this permit on One Stop

  15. Permit Small Cell Installation Other

    Multi-Carrier Small Cell Installation – Replace Existing Lamp Post

    Permit
    21-14596-SMCL
    Type
    Small Cell Installation
    Work
    Small Cell Installation
    Estimated cost (applicant’s figure)
    $0
    Fees
    $2,500
    Days from application to issue
    79
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  16. Permit VCC Paint Permit Cancelled

    Walls: ashen glidden, flat or eggshell window, doors and trim: white, semigloss shutters: French quarter green, semigloss

    Permit
    20-40967-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Mar 18, 2021

    See this permit on One Stop

  17. Permit Renovation (Non-Structural) Other

    Metal Bars and shutters installed in Ursulines side driveway gate without VCC review or approval. Reference Code: L3Y34T (3/31/2015) Repair and maintenance of drive gate. Adding vision panel as per drawing.

    Permit
    16-28919-ACCS
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,000
    Fees
    $65
    Contractor
    Robert Bodet

    See this permit on One Stop

  18. Permit VCC General Work In Review

    16-00917 Metal Bars and shutters installed in Ursulines side driveway gate without VCC review or approval. Reference Code: L3Y34T (3/31/2015) Repair and maintenance of drive gate. Adding vision panel as per drawing.

    Permit
    16-28919-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  19. Permit VCC General Work Other

    Remove existing Fire Free roofing material Repair and/or replace underlayment as necessary Install new natural slate (grey/green), using copper nails Install/repair half round copper gutters and flashing Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Remove existing copper cap flashing, replace with mortar cap with embedded stainless steel mesh, using VCC mortar formula listed below. Metal cap-flashing on the parapets is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Mortar: No more than 1 part Portland Cement, to 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mortar should range in color from white to beige but should not be grey in color.

    Permit
    16-08183-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $39,675
    Fees
    $0
    Contractor
    Ryan Moran
    Days from application to issue
    0
    Expires
    Sep 14, 2016

    See this permit on One Stop

  20. Permit VCC General Work Permit Cancelled

    Repair and maintenace of drive gate. Adding vision panels as per drawing.

    Permit
    15-10680-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  21. Permit Renovation (Non-Structural) Permit Issued

    Preparation of exterior painting as per VCPGNT-13-08131.Sanding, masonry repairs, sealers, water proofing and trim.

    Permit
    13-08394-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $128
    Contractor
    C Williams John
    Days from application to issue
    4
    Expires
    Sep 22, 2013

    See this permit on One Stop

  22. Permit VCC Paint Permit Issued

    • Walls...September Song, 102-5, flat or satin finish • Wooden elements including doors, windows, frames, shop windows, fascia/soffit of façade overhang…Quiet Veranda, SW 1164., semigloss • Shutters…Britannia Blue, 74-4, semigloss

    Permit
    13-08131-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 15, 2013

    See this permit on One Stop

  23. Code enforcement Case 12-06558-PNBL Closed

    A hearing was held on 08/12/2012 but the result of the hearing is still pending.

    1. Inspection: Posted Judgment (CE) No Violation
    2. Inspection: Posted Hearing Notice (CE) Violation Exists
    3. Inspection: Inspection No Violations Found
    4. Violation: 28-10 Paint / Protective Treatment
    5. Violation: 28-13 Parapet Wall
    6. Hearing: Initial Hearing Result Pending

    The city links this case to permit 26-08820-VCPNT.