French Quarter

905 Orleans Avenue is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 31 permits on record here; the most recent, a VCC general work permit, was filed in March 2024. 21 are still open. On this block in the past year: 6 requests to 311 and 41 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
2,404 sq ft
Parcel
41022113

Everything on record here

31 records, newest first · 21 open

  1. Permit VCC General Work Permit Issued

    Remove existing Fire Free Plus roofing material Repair and/or replace underlayment as necessary Install new 12” x 18” natural slate (grey/green), using copper nails Install/repair half round copper gutters and flashing Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets or chimneys is not allowed. A traditional mortar cap must be applied. Note: Trash chutes are required for removal of debris from all roofs. All work must conform to standard VCC policies & guidelines. Permit does not allow for cap flashing on parapets, chimneys or surrounding walls. Torch-applied roofing is not permitted in the Vieux Carré.

    Permit
    24-07189-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    5
    Expires
    Sep 18, 2024

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Permit Issued

    Slate roof

    Permit
    24-07189-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $150,000
    Fees
    $1,440
    Contractor
    Crescent City Roofing & Construction, LLC
    Days from application to issue
    932
    Expires
    Apr 1, 2027
    1. Application submitted
    2. Zoning review
    3. Application review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  3. Permit VCC General Work Other

    Repair/replace millwork per attached materials stamped VCC approved 06/01/2022. All new doors and windows must be single glazed, with true divided lites, made from Spanish cedar or mahogany. All work to match existing in material, color, size, profile, dimension, reveal, exposure and function. Appeal to retain HVAC equipment installed without benefit of VCC review and approval, per application & materials received 04/08/2022 & 05/17/2022. [Notice of Violation sent 06/25/2019]

    Permit
    22-10598-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    49
    Expires
    Dec 1, 2022

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) In Review

    Address VCC violation per attached.

    Permit
    22-10598-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $150,158
    Fees
    $1,223
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  5. Permit VCC General Work Other

    Paint exterior and trim of building using same existing colors that were previously approved by VCC.

    Permit
    22-00244-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  6. Permit VCC General Work In Review

    repoint masonry, remove metal awnings and repair awning damage to brick on Burgundy and Dauphine elevations. replace lintel on Dauphine side.

    Permit
    22-01427-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  7. Permit Renovation (Non-Structural) In Review

    repoint masonry, remove metal awnings and repair awning damage to brick on Burgundy and Dauphine elevations. replace lintel on Dauphine side.

    Permit
    22-01427-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $165
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) In Review

    Paint exterior and trim of building using same existing colors that were previously approved by VCC.

    Permit
    22-00244-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $15,090
    Fees
    $210
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  9. Permit Renovation (Non-Structural) Other

    Install light fixtures required by VCC. Progress Lighting P6397-30

    Permit
    22-00234-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $600
    Fees
    $98
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  10. Permit VCC General Work In Review

    Install (1) 1 ton ac system and (1) 2 ton ac system

    Permit
    19-20349-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  11. Permit Mechanical HVAC Other

    Install (1) 1 ton ac system and (1) 2 ton ac system

    Permit
    19-20349-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $10,900
    Fees
    $100
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  12. Permit VCC General Work Other

    Replace the cap flashing on the Burgundy Street elevation parapet: Install concrete precast coping 3’x15”x2 ¾”; tapered precast @ 20’ installed on roof; lead and mason mix used as foundation for precast; periodic anchoring to substrate; replace all cracked and missing shingles below areas where cement cap is installed. Repair windows on Burgundy Street side elevation: scrape and paint the windows; replace individual panes that are damaged to match the existing glass; repoint the bricks around the windows.

    Permit
    18-29938-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  13. Permit Renovation (Non-Structural) Other

    Replace the cap flashing on the Burgundy Street elevation parapet: Install concrete precast coping 3’x15”x2 ¾”; tapered precast @ 20’ installed on roof; lead and mason mix used as foundation for precast; periodic anchoring to substrate; replace all cracked and missing shingles below areas where cement cap is installed. Repair windows on Burgundy Street side elevation: scrape and paint the windows; replace individual panes that are damaged to match the existing glass; repoint the bricks around the windows.

    Permit
    18-29938-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,000
    Fees
    $120
    1. Application submitted

    See this permit on One Stop

  14. Permit VCC General Work Permit Cancelled

    Replace the cap flashing on the Burgundy Street elevation parapet: Install concrete precast coping 3’x15”x2 ¾” Tapered precast @ 20’ installed on roof Lead and mason mix used as foundation for precast Periodic anchoring to substrate Replace all cracked and missing shingles below areas where cement cap is installed Repair windows on Burgundy Street side elevation: scrape and paint the windows replace individual panes that are damaged to match the existing glass repoint the bricks around the windows ** can't issue, red flag for fines

    Permit
    17-26237-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  15. Permit Renovation (Non-Structural) Other

    Repair street elevations and windows, subject to VCC approval

    Permit
    17-26237-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,000
    Fees
    $120

    See this permit on One Stop

  16. Permit Electrical Repair / Replacement / Addition Permit Issued

    CHANGED OUT FIXTURE UNDER BALCONY

    Permit
    17-24174-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Charles J. Laborde Jr
    Days from application to issue
    235
    Expires
    Sep 5, 2018

    See this permit on One Stop

  17. Permit VCC General Work Permit Issued

    In response to VCC violations, cited permit number 16-12291: Remove deteriorated balcony floor boards and fascia boards. Install new 5/4x4 T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). Prime and paint balcony boards and fascia as follows: Top and sides of balcony boards: dark gray or French Quarter green, semi-gloss Bottom of balcony boards, outriggers, and fascia: white, semigloss Remove vegetation from masonry. Cut vegetation down and apply “RoundUp” or equal. Remove dead roots after 1-2 days. Install new VCC mortar (formula attached) as needed where deteriorated. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. NOTE: Permit issued in response to violations. Work shall commence no less than 30 days after permit is issued. Work must be completed no less than 60 days after work begins. Owner will call VCC for inspection upon completion of work. NOTE: Permit does not include all violations cited permit number 16-12291. Permit application for metal cap flashing and window repair must b

    Permit
    17-16998-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 15, 2017

    See this permit on One Stop

  18. Permit VCC General Work In Review

    Replace 3 windows on the Burgundy St side of the building per VCC.

    Permit
    17-00069-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  19. Permit Dumpster/Construction Zone Other

    Construction zone from 1-4-17 to 4-4-17 for a man lift per sketch.

    Permit
    17-00074-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $315

    See this permit on One Stop

  20. Permit Renovation (Non-Structural) Other

    Replace 3 windows on the Burgundy St side of the building per VCC.The windows shall be operable windws.

    Permit
    17-00069-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $12,600
    Fees
    $188
    Contractor
    Sunlight Contractors, LLC

    See this permit on One Stop

  21. Permit Electrical Repair / Replacement / Addition Permit Issued

    REPLACE AND DEMO OLS WIRES UNDER BALCONY TO APPROVAL

    Permit
    16-40714-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Charles J. Laborde Jr
    Days from application to issue
    0
    Expires
    Jun 13, 2017

    See this permit on One Stop

  22. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit General User: RPELL Tracking: 86169776076 Status: Permit Issued Status Date: 4/17/2012 12:00:00 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 4/17/2012 by RPELL Repair masonry wall in the carriage way to match existing with traditional soft brick and VCC approved mortar mix. - Repair plaster soffit in carriage way as needed to match existing with VCC approved mortar and stucco mix below.

    Permit
    VCCP-12-0356
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  23. Permit Electrical Repair / Replacement / Addition Permit Issued

    Work Descripton: REPAIRS- 5 X FEES Historical Import Type: Permits Electrical Commercial Repair-Replacement-Addition User: DMFOLEY Tracking: 86160883877 Status: Permit Issuance Active Status Date: 2/28/2012 12:00:00 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02360
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $240
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  24. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86125725874 Status: Permit Issuance Active Status Date: 2/28/2012 12:00:00 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02361
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  25. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86156942703 Status: Permit Issuance Active Status Date: 2/28/2012 12:00:00 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02362
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  26. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86187708491 Status: Inspection Pending Status Date: 2/28/2012 8:07:04 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02363
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  27. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86179496146 Status: Inspection Pending Status Date: 2/28/2012 8:07:04 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02364
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  28. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86139031917 Status: Inspection Pending Status Date: 2/28/2012 8:07:04 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02365
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  29. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86190759364 Status: Inspection Pending Status Date: 2/28/2012 8:07:04 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02366
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  30. Permit Electrical Service / Circuit / Feeder Permit Issued

    Work Descripton: REPAIRS Historical Import Type: Permits Electrical Commercial Service-Circuits-Feeders User: DMFOLEY Tracking: 86140056649 Status: Inspection Pending Status Date: 2/28/2012 8:07:04 AM Owner: Fortner Pamela A Owner Address: Etal 718 Orleans Ave #10, New Orleans, LA 70116 Owner Edited By: 2/28/2012 by DMFOLEY

    Permit
    12ELC-02367
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Cj's Electric LLC
    Days from application to issue
    0
    Expires
    Aug 28, 2012

    See this permit on One Stop

  31. Permit Electrical

    ELECTRICAL VACANCY REPAIRS SINGLE-FAMILY DWELLING SIX MONTHS VAC

    Permit
    E03007411
    Type
    Electrical
    Days from application to issue
    0

    Placed here by the building address from “905 ORLEANS AV UNIT B”.