French Quarter

513 Royal Street is in French Quarter, zoned VCC-2 (French Quarter shops and services, including the main shopping area). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 22 permits on record here; the most recent, a VCC paint permit, was filed in October 2025. 20 are still open. On this block in the past year: 9 requests to 311 and 58 calls to police.

Zoning
VCC-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
1,693 sq ft
Parcel
41022191

Everything on record here

22 records, newest first · 20 open

  1. Permit VCC Paint Permit Issued

    Repainting deck boards on balcony with existing paint color.

    Permit
    25-34089-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 30, 2026

    See this permit on One Stop

  2. Permit Dumpster/Construction Zone Permit Issued

    Scaffolding installation

    Permit
    25-19464-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $315
    Contractor
    Guaranty Sheet Metal Works Inc
    Days from application to issue
    24
    Expires
    Jan 21, 2026

    See this permit on One Stop

  3. Permit VCC General Work Permit Issued

    To remove and replace existing asbestos shingles with new North Country Natural Black Slate roof. to replace underlayment To fabricate and install all new copper flashings, box valley and counter flashings. Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets or chimneys is not allowed To repair shutters and paint, all work to match existing To perform masonry repairs to the front corner and have masons do stucco work and repaint stucco, all using VCC approved stucco and mortar mix Mortar: No more than: • 1 part Portland Cement, to • 3 parts lime, • 9 parts sand, and • enough water to form a workable mix. Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: • no greater than 1:12 part Portland Cement, to • 3 parts lime, and • 9 parts sand, • 6 lbs./cubic yard hair or fiber, and • enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: • No more than 1 Part Portland cement, • 3 Parts Lime, • 9 Parts Sand, • Enough water to form a workable mix.

    Permit
    25-11343-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Oct 14, 2025

    See this permit on One Stop

  4. Permit Renovation (Structural) Permit Issued

    To replace existing asbestos shingles with new North Country Natural Black Slate roof. Existing roof framed and decked with 1x8 sheeting for slate roof which was originally installed. Per customer request, to add treated 5/8" CDX plywood decking over the existing 1x sheeting before reroofing. To fabricate and install all new copper flashings, box valley and counter flashings. To install scaffolding and trash chute. To repair shutters and paint. To perform masonry repairs to the front cornice and have masons do stucco work and repaint stucco.

    Permit
    25-11343-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $75,200
    Fees
    $516
    Contractor
    Guaranty Sheet Metal Works, In
    Days from application to issue
    96
    Expires
    Jan 17, 2026
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  5. Permit VCC General Work Permit Issued

    To remove and replace existing asbestos shingles with new North Country Natural Black Slate roof. to replace underlayment To fabricate and install all new copper flashings, box valley and counter flashings. Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets or chimneys is not allowed To repair shutters and paint, all work to match existing To perform masonry repairs to the front corner and have masons do stucco work and repaint stucco, all using VCC approved stucco and mortar mix Mortar: No more than: • 1 part Portland Cement, to • 3 parts lime, • 9 parts sand, and • enough water to form a workable mix. Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: • no greater than 1:12 part Portland Cement, to • 3 parts lime, and • 9 parts sand, • 6 lbs./cubic yard hair or fiber, and • enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: • No more than 1 Part Portland cement, • 3 Parts Lime, • 9 Parts Sand, • Enough water to form a workable mix. PREPACKAGED MIXES ARE NOT PERMITTED.

    Permit
    25-10605-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Oct 9, 2025

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Permit Cancelled

    To replace existing asbestos shingles with new North Country Natural Black Slate roof. To fabricate and install all new copper flashings, box valley and counter flashings. To install scaffolding and trash chute. To repair shutters and paint. To perform masonry repairs to the front corner and have masons do stucco work and repaint stucco.

    Permit
    25-10605-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $65,000
    Fees
    $450
    Contractor
    Guaranty Sheet Metal Works, In
    1. Application submitted

    See this permit on One Stop

  7. Permit VCC Paint Permit Finaled

    Walls....Soft apricot, SW 6352, flat or satin finish Shutters & Ground-floor millwork (doors & windows)....Deep Sea Dive, SW 7618, semigloss Upper-floor millwork (doors & windows & frames)...off-white, semigloss • Wooden elements including fascia/soffit/outriggers of balcony....off-white, semigloss

    Permit
    14-15601-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Nov 19, 2014

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Permit Issued

    Exterior repairs as per 13-34682-VCGEN. (Bakery)

    Permit
    13-34742-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $15,000
    Fees
    $203
    Contractor
    Guaranty Sheet Metal Works Inc
    Days from application to issue
    0
    Expires
    Feb 16, 2014

    See this permit on One Stop

  9. Permit VCC General Work Permit Issued

    -To cleanup rear courtyard and courtyard elevations by removing all abandoned and extraneous pipes, utility lines, etc., chain link fencing, roofing material, built enclosures, extraneous overhangs, abandoned water heater, etc., and cocrete deck.

    Permit
    13-16520-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 28, 2013

    See this permit on One Stop

  10. Permit VCC General Work Permit Issued

    Repair/replace balcony decking to match existing, per VCC Guidelines detail #12 (attached). Install missing trim along fascia as required. Prime and paint all woodwork to match existing.

    Permit
    13-13402-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $1,500
    Fees
    $0
    Days from application to issue
    0
    Expires
    Oct 30, 2013

    See this permit on One Stop

  11. Permit VCC General Work Permit Issued

    Deck and louver screen installation At rear elevation - 1) For “saddle bag”, repair stucco skin as needed; repair/reframe base (floor/soffit) in wood T&G as needed, paint to match. 2) Install wood steps & landing @ rear 2nd floor doorway (rear elevation). At rear service bldg. and deck - 1) Remove round vent stack and patch slates as needed. 2) Remove low-slope, corrugated roofing on small bathroom addition; replace with standing seam metal (copper or galvanized), sloping toward Toulouse side. 3) On infill structure, install new T&G decking over existing fiberglass roof/deck substrate, sloping toward Toulouse side. 4) Reinstall HVAC, kitchen condenser equipment on deck after relocation for demo/clean-up. 5) Repair/re-stucco CMU wall to match existing; install new mahogany, 4-panel door in existing wall opening as shown. 6) Construct new louvered screen along top of CMU wall to screen deck area and mechanical equipment; detailing for louvered panels to match existing at 515-19 Royal service wing.

    Permit
    13-34682-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Guaranty Roofing
    Days from application to issue
    113
    Expires
    Feb 16, 2014

    See this permit on One Stop

  12. Permit Change of Use Inspection - Completed

    Change of Use from vacant commercial space to retail as per VCC approvals and sketch. State Health and Fire Marshal approval required prior to C of O. Exterior work and space prep completed under 09COM-01282.

    Permit
    09COM-01519
    Type
    Change of Use
    Work
    NA
    Estimated cost (applicant’s figure)
    $30,000
    Fees
    $225
    Contractor
    Jahncke Architects, Inc.
    Days from application to issue
    5
  13. Permit General Mechanical Application Acceptance - Approved

    INSTALL ELEC WAF AND 5-TON A\C. STEPHIEN CORCORAN (#2140)

    Permit
    09MCH-12980
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $68
    Contractor
    Steve's Refrigeration
    Days from application to issue
    5
  14. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    RENOVATIONS- 09COM-01282- RELEASED FROM BUILDING AND SENT TO ENTERGY 01/06/2010.

    Permit
    09ELC-17760
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $162
    Contractor
    Stephen Reimann
    Days from application to issue
    10
  15. Permit Renovation (Non-Structural) Application Acceptance - Approved No Review

    Build-out of tenant space (no use and occupancy) to include work as detailed on approved VCC drawings: including 2 new doors to carriageway (details to be approved by VCC staff); new opening at courtyard, and other millwork repairs as needed. New studs and drywall for inerior walls around perimeter, toilet room and stair, and new slab and floor covering. A separate permit to occupy the space is required.

    Permit
    09COM-01282
    Type
    Renovation (Non-Structural)
    Work
    NA
    Estimated cost (applicant’s figure)
    $20,000
    Fees
    $225
    Contractor
    Jahncke Architects, Inc.
    Days from application to issue
    5
  16. Permit Commercial

    GENERAL RENOVATIONS TO A MIXED OCCUPANCY BUILDING AS PER PLANS

    Permit
    08COM-01247
    Type
    Commercial
    Work
    NA
    Estimated cost (applicant’s figure)
    $250,000
    Fees
    $2,325
  17. Permit Interior Demolition Inspection - Completed

    EXPLORORY INTERIOR DEMOLITION ON 1ST FLOOR ONLY. NO EXTERIOR WORK ALLOWED. PLANS TO FOLLOW. NO USE & OCCUPANCY UNDER THIS PERMIT.

    Permit
    08COM-00072
    Type
    Interior Demolition
    Work
    NA
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $75
    Days from application to issue
    5
  18. Permit Mechanical Annual Fee Pending
    Permit
    03MCH-06146
    Type
    Mechanical
    Work
    Stationary Equipment Annual
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
  19. Permit Sign

    PROJECTING SIGN RETAIL STORE SIGN FEE 2004 PAID FOR 1

    Permit
    S04000398
    Type
    Sign
    Days from application to issue
    0
  20. Permit Sign

    PROJECTING SIGN RETAIL STORE SIGN FEE 2003 PAID FOR 1

    Permit
    S03000468
    Type
    Sign
    Days from application to issue
    0
  21. Permit Sign

    PROJECTING SIGN RETAIL STORE SIGN FEE

    Permit
    S02000354
    Type
    Sign
    Days from application to issue
    0
  22. Permit Sign

    PROJECTING SIGN RETAIL STORE SIGN FEE 2001 PAID

    Permit
    S01000166
    Type
    Sign
    Days from application to issue
    0