French Quarter
521 Conti Street is in French Quarter, zoned VCC-2 (French Quarter shops and services, including the main shopping area). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 23 permits on record here; the most recent, a VCC paint permit, was filed in July 2024. 18 are still open. On this block in the past year: 2 requests to 311 and 42 calls to police.
- Zoning
- VCC-2
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 4
- Lot size
- 1,319 sq ft
- Parcel
- 41022601
Everything on record here
23 records, newest first · 18 open
-
Permit VCC Paint Permit Issued
Utility (Entergy Gas) work required to convert customer onto a new High Pressure gas lines being installed with a City Reconstruction Project. A gas service line will be installed from a sidewalk base and elbow into the building for gas supply. An iron curb valve access port will be installed in the sidewalk surface with below grade valve for emergency service isolation.
- Permit
- 24-22547-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 4
- Expires
- Jan 26, 2025
-
Permit VCC General Work Permit Issued
to retain (2) bullet style security cameras in their current location inside the shop window. Neon window sign will be moved back appropriate distance from the face of the window by the building owner.
- Permit
- 21-25286-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 6
- Expires
- Mar 27, 2022
-
Permit Renovation (Non-Structural) Application Accepted
We would like to retain (2) security cameras in their current location on the front of the building façade near the main entrance. These cameras were listed in a VCC violation letter dated 9/23/2020. Please see attached photos. / Neon window sign will be moved back appropriate distance from the face of the window by the building owner. This sign was listed in the VCC violation letter dated 9/23/2020
- Permit
- 21-25286-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- Carimi Construction & Development LLC
- Application submitted
-
Permit VCC General Work Other
To remove existing four-ton AC condenser and to install new five-ton condensing unit in the same location, per materials stamped VCC approved 10/04/2021.
- Permit
- 21-24790-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 25
- Expires
- Apr 4, 2022
-
Permit Mechanical HVAC Inspection Phase
1st Floor unit -Install a new HEIL 5 ton 16 seer condenser & air handler. -Build & install metal supply & return air plenums. -Provide & install insulated spiral ductwork strapped to 1st floor ceiling. -Install a in line safety switch in main drain line. -Run fresh air duct thru penetration provided.
- Permit
- 21-24790-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $17,605
- Fees
- $71
- Contractor
- Carimi Construction and Development
- Days from application to issue
- 63
- Expires
- Apr 26, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit VCC General Work Other
To replace roof including installation of new copper cap flashing on side dividing parapet as per Architecture Committee approval of 08/10/2021 and materials stamped VCC approved 08/25/2021. Work includes: • Remove existing synthetic slate roofing material • Repair and/or replace underlayment as necessary • Install new natural slate (grey/green), using copper nails • Install/repair copper gutters, leaderhead and flashing (including approved cap flashing on dividing wall) • Reinstall existing Hecker ridge tiles. Replace broken tiles as needed, to match existing. • Contractor to examine condition of chimney once existing flashing removed and report condition to VCC staff Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Torch-applied roofing is not permitted in the Vieux Carré.
- Permit
- 21-21302-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 29
- Expires
- Feb 26, 2022
-
Permit Renovation (Non-Structural) Permit Issued
Remove and replace old slate roof with new slate roof. Remove and replace galvalume parapet caps and replace with new copper parapet caps and mortar dome caps. Replace existing roof hatch with new roof hatch. Please see attached for further detail.
- Permit
- 21-21302-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $71,215
- Fees
- $630
- Contractor
- Carimi Construction and Development
- Days from application to issue
- 364
- Expires
- Jan 25, 2023
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
-
Permit VCC General Work Other
Per attached materials stamped VCC approved 08/06/2021: Remove & dispose of existing 4 ton condenser, air handler & emergency pan. Install new 5 ton condenser per attached spec sheet. Install in same location as existing equipment.
- Permit
- 21-20118-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 18
- Expires
- Feb 6, 2022
-
Permit Mechanical HVAC Inspection Phase
Remove & dispose of existing 4 ton condenser , air handler & emergency pan. -Install a new HEIL 5 ton 16 seer condenser & air handler hung from ceiling. -Install a new emergency pan. -Build a metal transition to reconnect to existing trunk line. -Run a hard duct off of trunk up to 3rd floor ceiling & put a side wall register. -Install a in line safety switch & a pan safety switch.
- Permit
- 21-20118-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $11,092
- Fees
- $71
- Days from application to issue
- 129
- Expires
- May 19, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit VCC Paint Permit Issued
***ALL PAINT TO MATCH EXISTING
- Permit
- 21-16824-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Contractor
- David D Carimi
- Days from application to issue
- 6
- Expires
- Dec 16, 2021
-
Permit VCC General Work Other
Remove vegetation growing from building Repair, repoint masonry per attached VCC method Remove, replace damaged, deteriorated stucco per attached VCC method Removal of chainlink fence. The VCC cannot approve the installation of a chainlink fence. Repair iron capital on the Decatur side, Conti elevation to match original Repair, restore three wood windows on the 2nd floor of the Conti elevation to match original Repair, restore four wood windows on the 2nd & 3rd floor of the Decatur elevation to match original Repair, restore two wood windows on the 1st floor of the Decatur elevation to match original Remove vent from 3rd floor windows on the St Louis Repair, restore four wood windows on the 2nd & 3rd floor for the St Louis elevation to match original Repair, restore Conti storefront to match original Paint all elements to match existing *In response to violations* *This permit does not address all violations*
- Permit
- 20-33824-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 69
- Expires
- Mar 23, 2021
-
Permit Renovation (Non-Structural) Other
See attached proposal and pictures for VCC exterior work only per violation letters.
- Permit
- 20-33824-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $110,946
- Fees
- $923
- Contractor
- Carimi David
- Days from application to issue
- 79
- Expires
- Mar 25, 2021
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
-
Permit VCC General Work Permit Finaled
-Remove graffiti using "Bare Brick Graffiti Remover"
- Permit
- 13-42473-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 1
- Expires
- Apr 29, 2014
-
Permit VCC General Work Other
Historical Import Type: Enforcement VCC Permit Paint User: HIRVIN Tracking: 86197609390 Status: Permit Issued Status Date: 1/11/2012 12:00:00 AM Owner: Bevolo Gas & Electric Lights Owner Address: Et Al C/O Andrew Bevolo 521 Conti St, New Orleans, LA 70130 Owner Edited By: 1/11/2012 by HIRVIN Walls...Classic Gray, 1548, flat or satin finish • Upper floor lintels & ground floor posts & lintel (all currently painted)...Cumulus Cloud, 1550, flat or satin finish • Ground floor windows, frames, shop windows, passageway door...Classic Gray, 1548, semigloss • Upper floor windows and frames…Classic Gray, 1548, semigloss (preferably) or medium green (to match existing), semigloss • Ground floor entry door...Onondaga Clay, 1204, semigloss
- Permit
- VCCP-12-0016
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
MAKE REPAIRS TO THE MASONRY WALL LOCATED ON THE DOWNRIVER SIDE OF THE BUILDING AND LOOSE STUCCO WILL BE REMOVED AND THE MISSING PLASTER WILL BE REPLACED USING THE APPROVED STUCCO MIXTURE AS PER VCC PERMIT #080099.
- Permit
- 08COM-00439
- Type
- Renovation (Non-Structural)
- Work
- NA
- Estimated cost (applicant’s figure)
- $2,000
- Fees
- $90
- Days from application to issue
- 5
-
Permit Construction Loop Application Acceptance - Approved
fema trailer
- Permit
- 06ELC-00411
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Tmc Contractors Inc
- Days from application to issue
- 10
-
Permit Mechanical Annual Fee Pending
- Permit
- 03MCH-05698
- Type
- Mechanical
- Work
- Stationary Equipment Annual
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Electrical Service / Circuit / Feeder Inspection - Completed
circuits
- Permit
- 04ELC-05765
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $66
- Contractor
- Munster's Electric
- Days from application to issue
- 10
-
Permit Mechanical
INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING REPLACE ELEC WARM AIR FURNACE AND 4-TON A\C SYSTEM. ROBERT - 282-0625
- Permit
- M03006134
- Type
- Mechanical
- Days from application to issue
- 0
-
Permit Electrical
INCREASE OF SERVICE SHOP FRED VANLANGENDONCK EMERG/INCREASE
- Permit
- E02004226
- Type
- Electrical
- Days from application to issue
- 0
-
Permit Mechanical
INSTALL MECHANICAL EQUIPMENT COMMUNITY CENTER INSTALL 4-TON A\C SYSTEM AND ELEC WARM AIR FURNACE. 282-0625
- Permit
- M02003548
- Type
- Mechanical
- Days from application to issue
- 0
-
Permit Sign
FLAT SIGN RETAIL STORE SIGN OPERATING FEE FOR 1998
- Permit
- S98000327
- Type
- Sign
-
Permit Sign
FLAT SIGN RETAIL STORE SIGN OPERATING FEE FOR 1998
- Permit
- S98000328
- Type
- Sign