French Quarter

327 Chartres Street is in French Quarter, zoned VCC-2 (French Quarter shops and services, including the main shopping area). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 13 permits on record here; the most recent, a VCC general work permit, was filed in December 2023. 9 are still open. On this block in the past year: 13 requests to 311 and 77 calls to police.

Zoning
VCC-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
4
Lot size
2,091 sq ft
Parcel
41022650

Everything on record here

13 records, newest first · 9 open

  1. Permit VCC General Work Permit Cancelled

    Emergency permit to temporarily repair the rear door. Storm water from this past weekend caused the courtyard behind us to flood. Storm water from the courtyard poured into the retail store. I would like to remove the existing deteriorated door, install a sheet of plywood (painted white) and seal it off temporarily. I'm asking for approval of a temporary fix in order to prevent future water intrusion from my neighbors court yard. This would be a temporary repair until we can get approval for the necessary permanent repairs needed on the lower rear portion of the building where the rear door is located.

    Permit
    23-33318-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) In Review

    Emergency permit to temporarily repair the rear door. Storm water from this past weekend caused the courtyard behind us to flood. Storm water from the courtyard poured into the retail store. I would like to remove the existing deteriorated door, install a sheet of plywood (painted white) and seal it off temporarily. I'm asking for approval of a temporary fix in order to prevent future water intrusion from my neighbors court yard. This would be a temporary repair until we can get approval for the necessary permanent repairs needed on the lower rear portion of the building where the rear door is located. (NO OTHER WORK BESIDES REPAIRING REAR DOOR ALLOWED UNDER THIS PERMIT)

    Permit
    23-33318-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $200
    Fees
    $188
    1. Application submitted
    2. Application review
    3. Zoning review

    See this permit on One Stop

  3. Permit VCC General Work Other

    Replacement of 1 5 ton electric heating unit, coil and condenser only

    Permit
    23-21038-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  4. Permit Mechanical HVAC In Review

    Replacement of 1 5 ton electric heating unit, coil and condenser only

    Permit
    23-21038-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $71
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  5. Permit VCC General Work In Review

    Replace 5 ton electric heat, coil, condenser only.

    Permit
    21-08272-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  6. Permit Mechanical HVAC Application Accepted

    Replace 5 ton electric heat, coil, condenser only.

    Permit
    21-08272-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $71
    1. Application submitted

    See this permit on One Stop

  7. Permit VCC General Work In Review

    Install a 10' x 12' wooden(pressure treated) Deck on existing flat roof at the back of the building. The roof already has a existing mechanical deck which holds the HVAC equipment. The deck will sit inside of the existing parapet walls. There will be a 42" handrail around the entire deck with steel balusters every six inches. I have attached an example of the handrail. Above the handrail I would like to install a privacy screen made of lattice. I have attached a picture of that as well. I would like to paint the lattice gray.

    Permit
    21-05691-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Application Accepted

    Install a 10' x 12' wooden(pressure treated) Deck on existing flat roof at the back of the building. The roof already has a existing mechanical deck which holds the HVAC equipment. The deck will sit inside of the existing parapet walls. There will be a 42" handrail around the entire deck with steel balusters every six inches. I have attached an example of the handrail. Above the handrail I would like to install a privacy screen made of lattice. I have attached a picture of that as well. I would like to paint the lattice gray.

    Permit
    21-05691-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,800
    Fees
    $128
    Contractor
    McCluskey Daniel
    1. Application submitted

    See this permit on One Stop

  9. Permit VCC General Work Permit Issued

    Remove all existing "hardi slate" roof tiles Repair and/or replace underlayment as necessary Install new natural slate (semi-weathered gray/green), using copper nails Install/repair half round copper gutters and flashing Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets is not allowed To prepare for painting by washing using a low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: Walls..."Cream", flat or satin finish Doors..."Heather” (deep grape), SW 2705, semigloss WindowTrim/Lintels...White, semigloss In response to a violation

    Permit
    17-38677-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    May 20, 2018

    See this permit on One Stop

  10. Permit Renovation (Non-Structural) Other

    Remove hardi slate roof, install new true slate by GAF

    Permit
    17-38677-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $38,000
    Fees
    $310
    Contractor
    Daniel Mccluskey Construction

    See this permit on One Stop

  11. Permit VCC General Work Permit Issued

    remove vegitaion remove all illegal signage place all wiring in conduit and paint to match existing To prepare for painting by washing using a low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: windows and trim: white (to match existing), semigloss Doors: terracotta red ( to match exisitng), semigloss All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. NOTE: Permit issued in response to violations. Work shall commence no less than 30 days after permit is issued. Work must be completed no less than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

    Permit
    17-26278-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    14
    Expires
    Feb 14, 2018

    See this permit on One Stop

    Placed here by an address range from “329 Chartres St, 331 Chartres St”.

  12. Permit Renovation (Non-Structural) Other

    Correct VCC Violations: Repair and paint wood elements on 2nd & 3rd floor; remove Vegetation on building

    Permit
    17-26278-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,997
    Fees
    $128

    See this permit on One Stop

    Placed here by an address range from “329 Chartres St, 331 Chartres St”.

  13. Permit Mechanical Renewal Active
    Permit
    03MCH-05970
    Type
    Mechanical
    Work
    Stationary Equipment Annual
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0