French Quarter

920 Chartres Street is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 11 permits on record here; the most recent, a street cut permit, was filed in September 2026. 7 are still open. On this block in the past year: 5 requests to 311 and 47 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
5,079 sq ft
Parcel
41022687

Everything on record here

11 records, newest first · 7 open

  1. Permit Street Cut Permit Issued

    Place (1) 2" conduit and cable by directional bore between (2) 3'x5' cuts (29.958917, -90.062456), (29.959449, -90.061954)

    Permit
    26-28205-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $175
    Days from application to issue
    11
    Expires
    Apr 5, 2027
    1. Street Cut Paid
    2. Street Cut Deposit Paid
    3. Service Cut
    4. Application Submitted Complete
    5. SWBNO Electrical Engineering Approved
    6. SWBNO Network Engineering Approved
    7. Parks and Parkways Tree Review Complete
    8. Permit Approved Complete
    9. Public Works - Engineering Approved
    10. Public Works - Traffic Approved
    11. Permit Issued Complete

    See this permit on One Stop

  2. Permit VCC Paint Permit Issued

    main building only: Walls and 1st floor pilasters: Lancaster whitewash, flat or eggshell First floor doors and second floor shutters: Waterbury green, semigloss All other doors, windows, trim and wood elements: to match existing, semigloss rear buildings 920 and 922: shutters: waterbury green, semigloss walls: Lancaster whitewash, flat or eggshell doors, windows, trim, columns, soffit, fascia, underside of balcony and ALL WOODEN ELEMENTS: white/ off white, semigloss to remove vegitation to repoint bricks where necessary using VCC approved mortar mix To repoint masonry utilizing mortar mixed and applied per the VCC standard detail sheet (attached) Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. The resulting mix should range in color from off-white to beige but should not be grey or white in color.

    Permit
    25-04454-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    8
    Expires
    Aug 20, 2025

    See this permit on One Stop

  3. Permit VCC General Work Permit Cancelled

    Work to occur on main building only, per materials stamped VCC approved 04/22/2021. Work includes: • Remove existing synthetic slate roofing material • Repair and/or replace underlayment as necessary • Install new natural slate (grey/green), using copper nails • Install/repair internal copper gutters and flashing • Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. • Remove existing galvanized roofing above gallery • Install new standing seam copper roof of the same dimensions • Metal cap-flashing on the parapets or chimneys is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapets, chimneys or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré.

    Permit
    21-09013-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    21
    Expires
    Oct 22, 2021

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) Application Accepted

    To install new Vermont Slate Roof and copper roof. To remove and replace imitation slate shingles and install new Semi Weathering Green Slate with copper nails. To supply and install new internal copper gutter system. To install all copper flashings. To replace front galvanized metal roof with copper metal roof.

    Permit
    21-09013-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $36,800
    Fees
    $458
    Contractor
    Guaranty Sheet Metal Works, In
    1. Application submitted

    See this permit on One Stop

  5. Permit VCC General Work Permit Cancelled

    LEAK

    Permit
    20-38129-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Feb 18, 2021

    See this permit on One Stop

  6. Permit Mechanical Fuel Gas Permit Finaled

    LEAK

    Permit
    20-38129-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Vernon Marcotte
    Days from application to issue
    0
    Expires
    Feb 18, 2021
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  7. Permit Mechanical Fuel Gas Permit Finaled

    Out Over 6 Mo (1837)

    Permit
    18-19598-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Vernon Marcotte
    Days from application to issue
    0
    Expires
    Dec 12, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

    Placed here by the building address from “920 Chartres St #1”.

  8. Permit VCC Paint Permit Issued

    Paint to match existing

    Permit
    17-36570-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 25, 2018

    See this permit on One Stop

  9. Permit Electrical Service / Circuit / Feeder Permit Issued

    REPLACE SERVICE

    Permit
    13-10764-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    JOSEPH E BELLANDE, IV
    Days from application to issue
    0
    Expires
    Oct 8, 2013

    See this permit on One Stop

    Placed here by the building address from “920 Chartres St #7”.

  10. Permit VCC Paint Permit Issued

    Repaint front gallery posts and decorative cast iron panels at edge of front gallery deck; paint all black, to match existing.

    Permit
    12-34553-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $2,000
    Fees
    $0
    Contractor
    Robert Piacente
    Days from application to issue
    0
    Expires
    Jun 27, 2013

    See this permit on One Stop

  11. Permit VCC General Work Permit Issued

    To do the following work to address deteriorated conditions as documented on attached photographs received 11/26/12: • Repair façade gallery elements as necessary by replacing the tongue & groove 1 x 4’s along with deteriorated fascia boards and crown molding, all to match existing conditions • Prime & paint to match existing conditions as follows: o Gallery fascia boards & soffit…white or off-white o Decking…grey

    Permit
    12-31908-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    May 29, 2013

    See this permit on One Stop