French Quarter
928 Conti Street is in French Quarter, zoned VCC-2 (French Quarter shops and services, including the main shopping area). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 15 permits on record here; the most recent, a VCC general work permit, was filed in May 2022. 10 are still open. On this block in the past year: 2 requests to 311 and 108 calls to police.
- Zoning
- VCC-2
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 4
- Lot size
- 4,507 sq ft
- Parcel
- 41022725
Everything on record here
15 records, newest first · 10 open
-
Permit VCC General Work In Review
Request to retain fish hook iron work over the side alley gate. Current permit # 21-28587 vcgen. Case #19-06181 dbnvcc. Attention: Marguerite Roberts
- Permit
- 22-11920-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Permit Cancelled
Request to retain fish hook iron work over the side alley gate. Current permit # 21-28587 vcgen. Case #19-06181 dbnvcc. Attention: Marguerite Roberts
- Permit
- 22-11920-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $0
- Fees
- $180
- Application submitted
- Application review
- Zoning review
- Plan review
-
Permit Change of Address Permit Issued
update addresses to standards Change 928 Conti House Meter to 928 Conti St HM (AM12289071) Change 928 Conti St Unit 1 to 928 Conti St Apt 1A (AM12288436) Change 928 Conti St Unit 4 to 928 Conti St Apt 2A (AM12289018) Change 928 Conti St Unit 8 to 928 Conti St Apt 3A (AM12289070) Change 928 Conti St Unit 3 to 928 Conti St Apt 1B (AM12135739) Change 928 Conti St Unit 7 to 928 Conti St Apt 2B (AM12289068) Change 928 Conti St Unit 9 to 930 Conti St (AM12289069)
- Permit
- 21-29560-ECOA
- Type
- Change of Address
- Work
- Change of Address
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Apr 21, 2022
- Application submitted
- Permit approved
- Issue date
Placed here by an address range from “928 Conti St Apt 1A, 928 Conti St Apt 2A, 928 Conti St Apt 3A, 928 Conti St Apt 1B, 928 Conti St Apt 2B, 930 Conti St”.
-
Permit VCC General Work Permit Finaled
To make repairs and correct violations as per materials stamped VCC approved 10/27/2021. Work includes: • Repairing stucco on the Conti and Dauphine elevations. All stucco to be mixed and applied per VCC standard recipe and details (attached) • Repair Conti elevation balcony ceiling, flooring, and fascia, all to match existing • Repair lintels on the Dauphine elevation to match existing • Paint all repaired/replaced materials to match existing colors and sheens NOTE: Permit issued in response to violations. Work shall commence within 30 days from the date of permit issuance. Work must be completed no more than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.
- Permit
- 21-28587-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 14
- Expires
- Apr 27, 2022
-
Permit Renovation (Non-Structural) Permit Cancelled
Work related to VCC case # 19-06181-DBNVCC
- Permit
- 21-28587-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $8,930
- Fees
- $158
- Contractor
- Crescent City Contractors & Consultants Inc
- Application submitted
- Application review
-
Permit VCC General Work In Review
Correct noted VCC deficiencies in the letter dated 10/30/18. Case # 18-08011-DBNVCC.
- Permit
- 18-37680-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Permit Cancelled
Correct noted VCC deficiencies in the letter dated 10/30/18. Case # 18-08011-DBNVCC.
- Permit
- 18-37680-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $5,000
- Fees
- $128
- Contractor
- Crescent City Contractors & Consultants Inc
- Application submitted
-
Permit VCC General Work Permit Issued
Replace rotten sections of balcony decking to match existing on the rear service building. Replace rotten portion of handrail on the rear service building to match existing.
- Permit
- 12-20328-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Jan 27, 2013
-
Permit Electrical Permit Issuance Active
REPLACE PANEL
- Permit
- 10ELC-09649
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
-
Permit Electrical AppliedOnlinePending
REPLACE PANEL
- Permit
- 10ELC-09650
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
-
Permit Electrical AppliedOnlinePending
REPLACE PANEL
- Permit
- 10ELC-09651
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
REPLACE SERVICE
- Permit
- 10ELC-09652
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $82
- Contractor
- Stephen Cotton Elec. Company
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
REPLACE SERVICE
- Permit
- 10ELC-09653
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $82
- Contractor
- Stephen Cotton Elec. Company
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
REPLACE SERVICE
- Permit
- 10ELC-09654
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $82
- Contractor
- Stephen Cotton Elec. Company
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
REPLACE SERVICE
- Permit
- 10ELC-09655
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $82
- Contractor
- Stephen Cotton Elec. Company
- Days from application to issue
- 0