French Quarter

935 Conti Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 8 permits on record here; the most recent, a VCC paint permit, was filed in April 2017. 7 are still open. On this block in the past year: 2 requests to 311 and 108 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
4
Lot size
1,920 sq ft
Parcel
41022727

Everything on record here

8 records, newest first · 7 open

  1. Permit VCC Paint Permit Finaled

    To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft with portland cement content not to exceed 1 part to 12) and to paint as follows to match existing colors, per attached chips, as follows: Walls...light green, flat or eggshell finish Shutters...dark green, semigloss Trim including doors, windows and frames, soffit and fascia of front overhang...although these features are currently painted dark green and may be re-painted to match the existing

    Permit
    17-12442-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Oct 11, 2017

    See this permit on One Stop

  2. Permit General Mechanical Inspection - Completed

    2-ELEC WAR AND TWO 2-TON A\C. A.J. BARCIA (#6111)

    Permit
    05MCH-03726
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $104
    Contractor
    A.J.Barcia Htg A/C
    Days from application to issue
    5
  3. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-02828
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $110
    Contractor
    Pelican Elec Cont
    Days from application to issue
    10
  4. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-02829
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $110
    Contractor
    Pelican Elec Cont
    Days from application to issue
    10
  5. Permit Construction Loop Inspection - Completed

    temporary power

    Permit
    05ELC-01485
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Pelican Elec Cont
    Days from application to issue
    10
  6. Permit General Mechanical Inspection - Completed

    ELEC WATER HEATER. SIDNEY LAPUYADE (#17052

    Permit
    04MCH-06046
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    S.Lapuyade Plbg
    Days from application to issue
    5
  7. Permit General Mechanical Application Acceptance - Approved

    ELEC WATER HEATER. SIDNEY LAPUYADE (#17052)

    Permit
    04MCH-06047
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    S.Lapuyade Plbg
    Days from application to issue
    5
  8. Permit Renovation (Non-Structural) Application Acceptance - Approved No Review

    Renovations to existing double residence (935-37). Renovations include slab, electrical, plumbing, new kitchen and bath fixtures, paint, flooring, drywall, and install interior doors. No exterior work allowed under this permit.

    Permit
    04BLD-02416
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $75,000
    Fees
    $425
    Days from application to issue
    5