French Quarter

431 Dauphine Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 48 permits on record here; the most recent, a change of address permit, was filed in October 2023. 13 are still open. On this block in the past year: 4 requests to 311 and 65 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
4
Lot size
4,620 sq ft
Parcel
41022741

Everything on record here

48 records, newest first · 13 open

  1. Permit Change of Address Permit Issued

    23-26845-RNVN Mixed Use KEEP 431 Dauphine St (AM12287034) KEEP 433 Dauphine St (AM12256552) CHANGE 435 Dauphine St to 435 Dauphine St Apt 2B (AM12169256) CHANGE 437 Dauphine St to 435 Dauphine St Apt 2A (AM12169255) KEEP 439 Dauphine St (AM12210701)

    Permit
    23-29439-ECOA
    Type
    Change of Address
    Work
    Change of Address
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 25, 2024
    1. Application submitted
    2. Permit approved
    3. Issue date

    See this permit on One Stop

    Placed here by an address range from “431 Dauphine St, 439 Dauphine St, 435 Dauphine St, 437 Dauphine St, 433 Dauphine St, 435 Dauphine St Apt 2A, 435 Dauphine St Apt 2B”.

  2. Permit VCC General Work Permit Issued

    To repair existing French doors on the Dauphine elevation as per materials stamped VCC approved 10/27/2023. All details including paint color/sheen to match existing.

    Permit
    23-26845-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    11
    Expires
    Apr 27, 2024

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) In Review

    Permit is for the construction and installation of a double French door designed with eight lights (safety glass) on the top and wood bottom with square frame border. Door will exactly match all other doors by the carpenter. Cypress Wood is to be used in construction of the door. It will be used to swing in and out as is the old door being replaced. It will be painted with the exact color of all other doors. The door is extremely old and is very nicked up from usage.

    Permit
    23-26845-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,500
    Fees
    $203
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  4. Permit VCC Sign Permit Finaled

    **RETROACTIVE PERMIT To install one (1) double-faced wood sign to read “Church” per drawings stamped VCC approved 08/12/2022: Sign will measure: 30" w x 15" h Sign will hang perpendicular to the street, centered above the door…. Sign will hang from chains… Sign will have a black background with white lettering No additional illumination or lighting is approved Note: All existing signs must be removed and no additional signs may be installed. The bottom of the sign shall be at least 7’-0” above the surface of the sidewalk beneath it. Signs shall not extend beyond 4'-0" from the building face.

    Permit
    22-23988-VCSGN
    Type
    VCC Sign
    Work
    VCC Sign
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Feb 12, 2023

    See this permit on One Stop

  5. Permit Attached Sign Other

    15" x 30" black and white double-sided church sign

    Permit
    22-23988-SATT
    Type
    Attached Sign
    Work
    Attached Sign
    Estimated cost (applicant’s figure)
    $0
    Fees
    $325
    Contractor
    OPA Graphics
    1. Application submitted

    See this permit on One Stop

  6. Permit VCC Paint Permit Finaled

    paint to match existing light gray. remove AC vent in French door and repair door to original condition. all work to match exisitng. repair stucco cracks using VCC stucco formula, see below: Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: • no greater than 1:12 part Portland Cement, to • 3 parts lime, and • 9 parts sand, • 6 lbs./cubic yard hair or fiber, and • enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: • No more than 1 Part Portland cement, • 3 Parts Lime, • 9 Parts Sand, • Enough water to form a workable mix.

    Permit
    22-23670-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    7
    Expires
    Feb 15, 2023

    See this permit on One Stop

  7. Permit VCC Paint Permit Finaled

    ****ALL PAINT COLORS TO MATCH EXISTING walls: St. Anne St Yellow, flat or eggshell doors, windows and shutters: Gov Nichols Green, semigloss

    Permit
    21-19859-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Jan 12, 2022

    See this permit on One Stop

  8. Permit Permit Application Submitted

    Drag Brunch Fundraiser for The House of Tulips and Drag Show Hooker Ball Fundraiser for the Krewe of Narcissus

    Permit
    21-09481-COVR
    1. Application submitted
  9. Permit Small Cell Installation Other

    Verizon is proposing to install a small cell antenna on a Toro Street light pole. 20' pole to be painted by pole manufacturer. 3-5G radios mounted at 17.15' Rad Center. Non Metered pole with power delivered via underground. Fiber delivered via underground by others. Replace pole/transfer existing signage

    Permit
    20-42969-SMCL
    Type
    Small Cell Installation
    Work
    Small Cell Installation
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    1. Application submitted

    See this permit on One Stop

    Placed here by its map location from “485 Dauphine St”.

  10. Permit Electrical Service / Circuit / Feeder Other

    Reconnect for service.

    Permit
    19-15713-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $3,000
    Fees
    $220
    Contractor
    Zachary Ziemba
    1. Application submitted

    See this permit on One Stop

  11. Permit Electrical Service / Circuit / Feeder Permit Issued

    Increase service to building ( Building meter disconnects) 385

    Permit
    19-14394-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $220
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Nov 7, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  12. Permit Electrical Repair / Replacement / Addition Permit Issued

    Replace existing meter base. 385

    Permit
    19-14392-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $88
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Nov 7, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  13. Permit Electrical Repair / Replacement / Addition Permit Finaled

    Replace existing meter base. 385

    Permit
    19-14391-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $88
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Nov 7, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  14. Permit Electrical Repair / Replacement / Addition Permit Finaled

    Replace existing meter base. 385

    Permit
    19-14390-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $88
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Nov 7, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  15. Permit Mechanical HVAC Permit Finaled

    Change out condenser & air handler. 6191

    Permit
    19-10362-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $0
    Fees
    $71
    Contractor
    Mark Johnson
    Days from application to issue
    0
    Expires
    Oct 2, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  16. Permit VCC Sign Permit Finaled

    Double sided Aluminum / HDU Hanging Sign. Non-illuminated. 30" x 30" x 3"

    Permit
    18-37323-VCSGN
    Type
    VCC Sign
    Work
    VCC Sign
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    May 15, 2019

    See this permit on One Stop

  17. Permit Attached Sign Permit Finaled

    Double sided Aluminum / HDU Hanging Sign. Non-illuminated. 30" x 30" x 3"

    Permit
    18-37323-SATT
    Type
    Attached Sign
    Work
    Attached Sign
    Estimated cost (applicant’s figure)
    $0
    Fees
    $348
    Contractor
    OPA Graphics
    Days from application to issue
    10
    Expires
    May 19, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  18. Permit VCC General Work Permit Cancelled

    Replace meter socket and panel cut in cut out.

    Permit
    18-28467-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  19. Permit Street Cut Other

    Install underground electrical service at 48" deep. Cutting the brick sidewalk to install underground pipes for electrical service upgrade to the building. Once the pipe is completed the dirt and bricks will be replaced to the standard that was there initially.

    Permit
    18-28692-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $165
    Contractor
    Zachary Ziemba
    Days from application to issue
    20
    Expires
    Mar 18, 2019

    See this permit on One Stop

  20. Permit Electrical Service / Circuit / Feeder Permit Finaled

    New electrical service + renovate bar.

    Permit
    18-28474-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $280
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Feb 28, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  21. Permit Electrical Service / Circuit / Feeder Permit Issued

    Replace meter socket and panel cut in cut out.

    Permit
    18-28472-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Feb 28, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  22. Permit Electrical Service / Circuit / Feeder Permit Issued

    Replace meter socket and panel cut in cut out.

    Permit
    18-28469-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Feb 28, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  23. Permit Electrical Service / Circuit / Feeder Permit Issued

    Replace meter socket and panel cut in cut out.

    Permit
    18-28463-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Feb 28, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  24. Permit Mechanical HVAC Permit Cancelled

    Two 5 Ton A/C Unit - 2 5 Ton W.A.F. 954

    Permit
    18-23547-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $0
    Fees
    $116
    Contractor
    James L Jones
    Days from application to issue
    0
    Expires
    Jan 17, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  25. Permit Electrical Service / Circuit / Feeder Permit Finaled

    Run branch circuits for new bar, 18-15035 RNVN

    Permit
    18-15035-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $130
    Contractor
    Zachary Ziemba
    Days from application to issue
    0
    Expires
    Dec 12, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  26. Permit Renovation (Non-Structural) Occupancy

    Replace an existing steel beam (12x35) that spans across the width of the interior of the building and is supported by steel columns at its bearing ends. Supplement existing ceiling joists that have visual termite and moisture damage, new 1 3/4" x 14 " Microllam joist at 16 inches on center will be installed between existing joists. No exterior or masonry work will be performed. - INTERIOR WORK ONLY

    Permit
    18-15035-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $37,000
    Fees
    $245
    Days from application to issue
    25
    Expires
    Dec 1, 2018
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  27. Permit Renovation (Non-Structural) Occupancy

    Painting walls/ceiling and adding cabinetryat existing bar - INTERIOR ONLY.

    Permit
    18-08382-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $110
    Contractor
    French Quarter Interiors
    Days from application to issue
    81
    Expires
    Dec 1, 2018
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  28. Permit VCC General Work Permit Finaled

    To install new French doors and transom window in existing in-filled opening on the Burgundy elevation of the building as per Architecture Committee approval of 11/28/17 and final materials stamped VCC approved 07/19/18 All millwork to exactly match existing millwork found on the Dauphine and St. Louis elevations All millwork to be painted to match existing millwork on the Dauphine and St. Louis elevations

    Permit
    17-38735-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    247
    Expires
    Jan 19, 2019

    See this permit on One Stop

  29. Permit Renovation (Non-Structural) Other

    Applying to add a 32" door in the back of the building to access alleyway for a smoking area. Prior approval of an "exploratory" permit, was permit reference code 7X3YB3. Requesting permit to have a 32" door opening where an old door was located, that has since been sealed by bricks. Requesting a steel 6 panel door, opening in to protect against weather.

    Permit
    17-38735-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,500
    Fees
    $195
    Days from application to issue
    252
    Expires
    Jan 23, 2019

    See this permit on One Stop

  30. Permit VCC General Work Permit Finaled

    To remove exploratory areas of stucco from the Burgundy elevation to try to determine location of previously existing doorway Applicant to apply to re-stucco wall and/or continue work related to a new wall opening within 30 days of stucco removal

    Permit
    17-32823-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Apr 4, 2018

    See this permit on One Stop

  31. Permit Renovation (Non-Structural) Other

    Permit for "exploratory" work to install a door leading to alleyway which will become a smoking area PER vcc.

    Permit
    17-32823-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $128

    See this permit on One Stop

  32. Permit VCC Paint Permit Finaled

    Walls: Shitake N220-4 Behr, flat or eggshell Tim: Baby Artichoke S330-1 Behr, semigloss Doors: AlpineTrail N420-7 Behr, semigloss

    Permit
    17-13651-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1062
    Expires
    Sep 16, 2020

    See this permit on One Stop

  33. Permit VCC General Work Permit Cancelled

    CCNO-166-35 Lighting; Exterior Light Fixtures Replacement from Unshielded to Shielded Fixtures (White) ccno166-35 Wires/Conduit; will be placed in conduit; and painted to match the building PENDING: CCNO-166-35 Vent; Pending approval from the VCC, the two transoms housing exhaust fans will be replaced with plywood and repainted to match building. CCNO166-35 Doors; seeking approval to leave Plexiglass on doors *Permit issued with transoms to be replaced with glass/restored. Inspection 2/8/2019 shows appropriate transoms are now in place.*

    Permit
    16-31244-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  34. Permit Renovation (Non-Structural) Other

    Correct exterior violations.

    Permit
    16-31244-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,000
    Fees
    $105
    Contractor
    Jo Anne Ferrara-Mo

    See this permit on One Stop

  35. Permit VCC General Work In Review

    retain plywood transoms, resolve other violations

    Permit
    16-29327-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  36. Permit Renovation (Non-Structural) Other

    To correct ongoing VCC violations, as follows: Remove plywood from transoms and restore glass.

    Permit
    16-29327-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $3,000
    Fees
    $113

    See this permit on One Stop

  37. Permit VCC Paint Permit Finaled

    Walls: ”St. Ann Street Yellow” SW, flat or eggshell finish (to match existing) Shutters: ” Gov. Nicholls Green” SW, semigloss (to match existing) Trim including windows, frames: white, semigloss (to match existing) Door: ” Gov. Nicholls Green, semigloss (to match existing)

    Permit
    15-35644-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    May 30, 2016

    See this permit on One Stop

  38. Permit Renovation (Structural) Permit Issued

    EXTERIOR REPAIRS TO EXISTING STRUCTURE DUE TO CAR ACCIDENT AS PER VCC PERMIT #14-08227-VCGEN.

    Permit
    14-08284-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $13,720
    Fees
    $195
    Days from application to issue
    0
    Expires
    Sep 17, 2014

    See this permit on One Stop

  39. Permit VCC General Work Permit Finaled

    -To repair masonry wall, door-frame, and millwork to match existing in order to mitigate damage caused by automobile impact per contractors scope of work received 3/13/14, and engineer's letter received 03/17/14. -Masonry wall to be repaired utilizing like-kind soft red brick with VCC approved mortar mix below. -Stucco to be VCC approved stucco mix below. -All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. -Should any additional structural concerns not outlined in engineer's letter arise during construction, the applicant will contact the VCC and the Dept. of Safety & Permits for inspection. Mortar: No more than 1 part Portland Cement, 3 parts lime, 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted, as quality control is not consistent. Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part Portland Cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: No more than 1 Part Portland cement, 3 Parts Lime, 9 Parts Sand, Enough water to form a workable mix. Note: RATIO OF PORTLAND CEMENT NOT TO EXCEED 1:12. Note: The VCC defers all issues of safety, stability, & soundness of any shoring to the Dept. of Safety & Permits, whose role is to guarantee those intended qualific

    Permit
    14-08227-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Sep 17, 2014

    See this permit on One Stop

  40. Permit VCC General Work Permit Finaled

    Historical Import Type: Enforcement VCC Permit General User: HIRVIN Tracking: 86133172956 Status: Permit Issued Status Date: 3/27/2012 12:00:00 AM Owner: Jo-Jo Holdings LLC Owner Address: 201 P K Way, Slidell, LA 70460 Owner Edited By: 3/27/2012 by HIRVIN To repair/replace doors as necessary to exactly match existing, per attached photographs; prime & paint to match existing color (New London Burgundy, HC-61, Benjamin Moore), semigloss

    Permit
    VCCP-12-0287
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  41. Permit Electrical Permit Issuance Active

    VACANCY

    Permit
    11ELC-09082
    Type
    Electrical
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
  42. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    CIRCUITS

    Permit
    07ELC-08405
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $42
    Contractor
    Farthing Electric
    Days from application to issue
    10
  43. Permit Renovation (Non-Structural) Application Acceptance - Approved No Review

    ELECTRICAL AND SHEETROCK REPAIR TO SECOND FLOOR STORAGE ROOM. THIS IS A SUPPLEMENT TO PERMIT # 07COM-00323

    Permit
    07COM-00409
    Type
    Renovation (Non-Structural)
    Work
    NA
    Estimated cost (applicant’s figure)
    $5,500
    Fees
    $80
    Contractor
    Farthing Electric
    Days from application to issue
    5
  44. Permit Emergency Permit Application Acceptance - Approved No Review

    Electrical repairs to ground floor (Double Play Bar) of mixed use structure. Other minor repairs as needed. No exterior work.

    Permit
    07COM-00323
    Type
    Emergency Permit
    Work
    NA
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $85
    Contractor
    Farthing Electric
    Days from application to issue
    5
  45. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    RECONNECT

    Permit
    07ELC-04861
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Farthing Electric
    Days from application to issue
    10
  46. Permit Mechanical Annual Fee Pending
    Permit
    03MCH-06625
    Type
    Mechanical
    Work
    Stationary Equipment Annual
    Estimated cost (applicant’s figure)
    $0
    Fees
    $22
  47. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT COMMUNITY CENTER REPLACE ELEC WATER HEATER. LEO RAYMOND - 242-1847

    Permit
    M01004703
    Type
    Mechanical
    Days from application to issue
    0
  48. Permit Electrical

    ELECTRICAL RECONNECT BAR/COCKTAIL VETO CACIOPPO

    Permit
    E01005536
    Type
    Electrical
    Days from application to issue
    0