French Quarter

1009 Dauphine Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 20 permits on record here; the most recent, a VCC general work permit, was filed in April 2026. 15 are still open. On this block in the past year: 9 requests to 311 and 32 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
4,113 sq ft
Parcel
41022790

Everything on record here

20 records, newest first · 15 open

  1. Permit VCC General Work In Review

    Hand railing for front steps

    Permit
    26-12091-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) In Review

    Hand railing for front steps

    Permit
    26-12091-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,000
    Fees
    $188
    1. Application submitted
    2. Application review
    3. Zoning review

    See this permit on One Stop

  3. Permit Sidewalk Repair Other

    Sidewalk repair in front of condo building

    Permit
    22-13006-RSWR
    Type
    Sidewalk Repair
    Work
    Sidewalk Repair
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    NOLA Concrete LLC

    See this permit on One Stop

  4. Permit Dumpster/Construction Zone Other

    Debris removal related to demolition of concrete patio

    Permit
    22-10154-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Days from application to issue
    27
    Expires
    Nov 2, 2022

    See this permit on One Stop

  5. Permit VCC General Work Other

    Per attached materials stamped VCC approved 03/03/2022: Remove existing concrete paving in patio, sidewalk and alley. Regrade and replace concrete to match existing. Note: concrete may not be stamped or stained. All drainage to be maintained and reinstalled to match existing. Install brick steps at rear entry per attached typical detail sheet no. 18 Remove vegetation from masonry. Cut vegetation down and apply a weed and grass killer. Remove dead roots after 1-2 days. Install new VCC mortar (formula attached) as needed where deteriorated Repoint masonry planters and rear courtyard wall utilizing mortar mixed and applied per the VCC standard detail sheet (attached). Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. MORTAR IS NOT TO BE APPLIED OVER THE FACE OF THE BRICKS UNDER ANY CIRCUMSTANCES. Lath of any kind is prohibited unless preapproved by VCC staff prior to installation. Doing so will result in a STOP WORK ORDER being placed on the property and violation case will be opened on the property. VOIDS IN THE BRICK ARE NOT TO BE FILLED WITH

    Permit
    21-19875-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    227
    Expires
    Sep 3, 2022

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Application Accepted

    Remove and replace existing concrete on the patio. Remove and replace back concrete steps with brick steps. Re-point brick on existing planters and repair large crack that has opened up in the back brick wall of the patio planters. Remove and replace sidewalk concrete. Both the patio and the sidewalk have major ruptures that have become a safety concern.

    Permit
    21-19875-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $15,000
    Fees
    $293
    1. Application submitted

    See this permit on One Stop

  7. Permit VCC Security Camera Application Permit Finaled

    Per attached materials stamped VCC approved 04/10/19 Install two (2) "LTS Platinum HD-TVI Turret Camera 5MP CMHT1752N-28" cameras in the front soffit, as indicated. Paint camera housing to match adjacent surface to minimize visibility. Install one (1) wall-mounted "LTS Platinum HD-TVI bullet camera 5MP CMHR6452N-28" camera in the St. Philip side alley by the downspout, facing towards the alley gate. Paint camera housing to match adjacent surface to minimize visibility. Install wires discreetly behind downspout.

    Permit
    19-07402-VCCAM
    Type
    VCC Security Camera Application
    Work
    VCC Security Camera Application
    Estimated cost (applicant’s figure)
    $790
    Fees
    $0
    Contractor
    Cox Cable New Orleans Inc
    Days from application to issue
    31
    Expires
    Oct 10, 2019

    See this permit on One Stop

  8. Permit VCC Paint Permit Finaled

    ALL PAINT TO MATCH EXISTING Walls: Whte, eggshell or flat (to match exisitng) Shutters: Benjamin Moore, Vintage Wine, semigloss (to match existing) Doors and windows: Blue Dusk, white and gray (to matche existing) 4/11/19 added the following elements, paint to match existing Trim: BM Steam (to match existing( Ironwork and foundationBM Starburst (to match existing) NOTE: All shutter hardware to match adjacent surface; hinge attached to shutter should match shutter color, and hinge attached to trim should match trim. Shutter hardware should not be painted black. Additionally, outriggers under balconies or galleries should be painted white as they are not decorative ironwork elements. Failure to exactly match permit specified colors will result in a VCC violation and mandated repainting.

    Permit
    19-03754-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Mike Roberts
    Days from application to issue
    2
    Expires
    Aug 7, 2019

    See this permit on One Stop

  9. Permit VCC General Work Permit Issued

    • Remove existing synthetic slate roofing material & flashing • Repair and/or replace underlayment as necessary • Install new natural slate (grey/green), using copper nails • Install/repair copper gutters, flashing and vents • Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles • Metal cap-flashing on the parapets is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré.

    Permit
    14-26927-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Feb 28, 2015

    See this permit on One Stop

  10. Permit VCC Paint Permit Issued

    -To paint • Walls...Tavern Taupe 2W15-3, flat or satin finish • Foundation, trim accents & overhang soffit… Urban Putty 2W15-3, flat or satin finish • Wooden elements including windows, frames, shop windows & fascia...White Dove OC-17, semigloss • Front Doors…Prada Red 3WA25-3, semigloss • Shutters, ironwork & trim accents … Amazon Soil 2115-30, semigloss Permit re-issued 6.25.14

    Permit
    13-47501-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jun 12, 2014

    See this permit on One Stop

  11. Permit VCC General Work Permit Issued

    Re-attach copper flashing to three chimneys where separated. Remove approx. 3' of ridge caps and slates as required to install copper flashing; and reinstall existing slates and ridge caps.

    Permit
    12-28078-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $1,500
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 22, 2013

    See this permit on One Stop

  12. Permit VCC General Work Permit Issued

    alley gate replacement

    Permit
    12-17592-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jan 2, 2013

    See this permit on One Stop

  13. Permit Renovation (Non-Structural) Permit Issued

    Replace existing gates and panels above with new per Vccp-12-0339.

    Permit
    12-17053-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,065
    Fees
    $113
    Days from application to issue
    0
    Expires
    Dec 27, 2012

    See this permit on One Stop

  14. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit General User: RPELL Tracking: 86132826605 Status: Permit Issued Status Date: 4/11/2012 12:00:00 AM Owner: Nizialek Philip D Owner Address: 1011 Dauphine St Unit B, New Orleans, LA 70116 Owner Edited By: 4/11/2012 by RPELL Increase the height of the exiting beaded board transom panels on both alley gates by 3'. - Paint the enlarged transom panels to match existing

    Permit
    VCCP-12-0339
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  15. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    RUN CIRCUITS FOR RECEPTALS LITS & SWITCHES

    Permit
    04ELC-06202
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Contractor
    Rick's Electric
    Days from application to issue
    10
  16. Permit General Mechanical Inspection - Completed

    gas warm air furnace and one 3ton ac unit. sidney .

    Permit
    04MCH-03932
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Days from application to issue
    5
  17. Permit General Mechanical Inspection - Completed

    gas warm air furnace and one 3ton ac unit. sidney .

    Permit
    04MCH-03933
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Contractor
    A/C Ambulance Ser
    Days from application to issue
    5
  18. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    COMPLETE REWIRE

    Permit
    04ELC-05200
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $110
    Contractor
    Eddie J. Freeman
    Days from application to issue
    10
  19. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    COMPLETE REWIRE

    Permit
    04ELC-05201
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $160
    Contractor
    Eddie J. Freeman
    Days from application to issue
    10
  20. Permit Building

    CHANGE OF USE MULTI-FAMILY DWELLING CONVERT EXISTING 4-UNIT MULTI-FAMILY DWELLING TO 3-UNIT MULTI-FAMILY DWELLING AS PER SKETCH. 3 KITCHENS TO REMAIN. NO EXTERIOR WORK ALLOWED UNDER THIS PERMIT.

    Permit
    B03006399
    Type
    Building
    Days from application to issue
    0