French Quarter
1129 Decatur Street is in French Quarter, zoned VCC-1 (French Quarter small-scale shops and services that fit nearby homes). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 24 permits on record here; the most recent, a plumbing permit, was filed in July 2024. 15 are still open. There was 1 past code enforcement case, the latest in June 2017, all closed. On this block in the past year: 6 requests to 311 and 136 calls to police.
- Zoning
- VCC-1
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 6
- Lot size
- 2,920 sq ft
- Parcel
- 41022839
Everything on record here
25 records, newest first · 15 open
-
Permit Plumbing Permit Permit Finaled
INSTALL NEW 3 COMPARMENT SINK, GREASE TRAP, AND HAND SINK.
- Permit
- 24-23481-PLMB
- Type
- Plumbing Permit
- Work
- Plumbing Permit
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Jamal Every
- Days from application to issue
- 1
- Expires
- Jan 31, 2025
-
Permit VCC Sign In Review
O ice-cream LLC has a ice cream store, address is 1129 Decatur St, NEW ORLEANS , apply a out sign hanging on the outside in the French Quarter.
- Permit
- 24-20389-VCSGN
- Type
- VCC Sign
- Work
- VCC Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Attached Sign Application Accepted
O ice-cream LLC has a ice cream store, address is 1129 Decatur St, NEW ORLEANS , apply a out sign hanging on the outside in the French Quarter.
- Permit
- 24-20389-SATT
- Type
- Attached Sign
- Work
- Attached Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $325
- Application submitted
-
Permit Renovation (Non-Structural) Occupancy
Change of use from massage parlor to ice cream shop (Specialty Restaurant) Replace a 3-compartment sink.
- Permit
- 24-13844-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $5,000
- Fees
- $218
- Days from application to issue
- 99
- Expires
- Feb 15, 2025
- Application submitted
- Zoning review
- Application review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit VCC Paint Permit Finaled
PERMIT TO RESOLVE VCC Case # 18-11707-VCCNOP - DOOR HARDWARE: Application to remove current Electronic Lock Door Hardware and replace with SCHLAGE TOUCH KEYLESS TOUCHSCREEN LEVER door hardware (listed on VCC's "Potentially Approvable Keypad Options")
- Permit
- 21-34791-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Contractor
- Brett Richman
- Days from application to issue
- 104
- Expires
- Sep 29, 2022
-
Permit VCC Paint Permit Finaled
SECURITY CAMERAS: Remove Security Cameras in front of Building Installed without either VCC and Owner Approval by prior Tenant, LIGHTING: Replace floodlights in front of Building with VCC approved light fixtures (Remcraft 1100 cylindrical fixtures to be installed on the first floor and prefinished or painted to match adjacent building service), STUCCO: Repair minor stucco damage in front of building above 3rd floor balcony door with VCC-approved materials and paint to match existing trim NOTE: Keypad proposal in response to violation to be reviewed and permitted separately. NOTE: Permit issued in response to violations. Work shall commence within 30 days from the date of permit issuance. Work must be completed no more than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work
- Permit
- 21-34779-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Contractor
- Brett Richman
- Days from application to issue
- 1
- Expires
- Jun 16, 2022
-
Permit VCC Sign Permit Finaled
• To install one (1) double-faced wood sign to read “French Quarter Art Gallery” per materials stamped VCC approved 03/27/19 • Sign will be circular and measure: 24” in diameter x 2” thickness • Sign will hang perpendicular to the street, centered between the two commercial doors • Sign will hang from chains attached to existing pole • Sign will have a beige background with burgundy lettering • No additional illumination or lighting is approved Note: All existing signs must be removed and no additional signs may be installed. The bottom of the sign shall be at least 7’-0” above the surface of the sidewalk beneath it. Signs shall not extend beyond 4'-0" from the building face.
- Permit
- 20-46379-VCSGN
- Type
- VCC Sign
- Work
- VCC Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 5
- Expires
- May 18, 2021
-
Permit Attached Sign Other
Sign as per plans
- Permit
- 20-46379-SATT
- Type
- Attached Sign
- Work
- Attached Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $278
- Application submitted
-
Permit VCC General Work In Review
Review of keyless door hardware. (See Property Report and Minutes of 04/23/19)
- Permit
- 19-24589-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
Placed here by an address range from “1129-1131 Decatur St”.
-
Permit VCC Sign Permit Finaled
• To install one (1) double-faced wood sign to read “NOLA BREW BUS ESTD 2016 LET THE GOOD TIMES FLOW” per materials stamped VCC approved 03/27/19 • Sign will be circular and measure: 24” in diameter x 1” thickness • Sign will hang perpendicular to the street, centered between the two commercial doors • Sign will hang from chains attached to existing pole • Sign will have a white background with blue and gold lettering • No additional illumination or lighting is approved Note: All existing signs must be removed and no additional signs may be installed. The bottom of the sign shall be at least 7’-0” above the surface of the sidewalk beneath it. Signs shall not extend beyond 4'-0" from the building face.
- Permit
- 19-09395-VCSGN
- Type
- VCC Sign
- Work
- VCC Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 1
- Expires
- Sep 27, 2019
-
Permit Attached Sign Permit Issued
- Install one double faced wood sign to read: “NOLA BREW BUS ESTD 2016 LET THE GOOD TIMES FLOW” in blue and yellow lettering per attached photo - Sign will measure 24” diameter, circular sign 1” thick, which is approvable for existing 20.5’ linear frontage of the business. - Sign to be hung by existing metal pole, and metal chain - bottom of sign shall be at least 9’0” above surface of sidewalk beneath it - Sign to be hung by existing metal pole and metal chain
- Permit
- 19-09395-SATT
- Type
- Attached Sign
- Work
- Attached Sign
- Estimated cost (applicant’s figure)
- $0
- Fees
- $285
- Contractor
- Brett Richman
- Days from application to issue
- 44
- Expires
- Nov 8, 2019
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
-
Permit VCC General Work Permit Issued
To correct violations as per scope of work stamped VCC approved 08/05/19. Work includes: Remove deteriorated floor boards, stringers, and fascia boards from third floor balcony on the Decatur elevation. Install new 3"x4" beaded stringers, 5/4x4 wood T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). Remove security camera from Decatur elevation Remove all existing, unpermitted and/or unshielded light fixtures Install three (3) Remcraft 1100 to the Decatur elevation wall centered over the door openings Fixtures shall be painted or prefinished to match adjacent building surface. All wiring shall be placed in conduits All conduits shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces. All fixtures shall use lamps with the following criteria: 3000K color temperature, 80+ color rendering index, and 800-1200 lumens per bulb Repair stucco and repoint chimney as per VCC standard details (attached) To prepare for painting by washing using a low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: • Walls...terra cotta matched to existing, flat
- Permit
- 19-06321-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 160
- Expires
- Feb 6, 2020
-
Permit Renovation (Non-Structural) Other
Repair balcony decking material, remove security cameras, replace security lighting, minor stucco repair, repair/tuckpointing chimney, repair/remove paint on windows on first floor, paint exterior
- Permit
- 19-06321-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $2,000
- Fees
- $195
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
-
Permit Renovation (Non-Structural) Occupancy
Establishing the use as a retail store/tour bus venue. no mechanical no electrical and no plumbing work and no architectural work. only cosmetic.
- Permit
- 18-23765-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $1,000
- Fees
- $65
- Days from application to issue
- 0
- Expires
- Jan 19, 2019
- Application submitted
- Application review
- Zoning review
- Permit approved
- Issue date
- First inspection
-
Code enforcement Case 17-06651-MPM Closed
This file requires further review and should be closed or reset for a new inspection.
- Inspection: Inspection No Violation
The city links this case to permit 24-23481-PLMB.
-
Permit VCC General Work Permit Issued
stucco Repoint the rear wall of the rear service building with VCC approved mortar mix below
- Permit
- 12-23952-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $2,000
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Mar 10, 2013
-
Permit Attached Sign Application Acceptance - Approved No Review
Sign (flat wood) 30"x20"X3/4" as per sketch and VCC approval #80466
- Permit
- 08SIG-00078
- Type
- Attached Sign
- Work
- NA
- Estimated cost (applicant’s figure)
- $1,200
- Fees
- $220
- Contractor
- Mystic Blue Sign Co
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18358
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $75
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18360
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $75
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18362
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $68
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18363
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18364
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $84
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
service change
- Permit
- 08ELC-18365
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $60
- Contractor
- Mcguire Elect Co Inc
- Days from application to issue
- 10
Placed here by the building address from “1131 Decatur St H”.
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
RENOVATIONS TO AN EXISTING DWELLING <<ALL INTERIOR>>
- Permit
- 08COM-01285
- Type
- Renovation (Non-Structural)
- Work
- NA
- Estimated cost (applicant’s figure)
- $7,000
- Fees
- $85
- Days from application to issue
- 5
-
Permit Building
GENERAL REPAIRS MIXED OCCUPANCY REPAIRS TO BE DONE TO DETERIORATING BACK WALL IN SLAVE QUARTERS LOCATED AT THE REAR OF THE ABOVE ADDRESS AS PER VCC#??? APPROVAL.
- Permit
- B99006272
- Type
- Building