French Quarter

734 Dumaine Street is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 6 permits on record here; the most recent, a street cut permit, was filed in December 2024. 4 are still open. There was 1 past code enforcement case, the latest in April 2023, all closed. On this block in the past year: 14 requests to 311 and 54 calls to police.

Zoning
VCR-2
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
2,345 sq ft
Parcel
41022892

Everything on record here

7 records, newest first · 4 open

  1. Permit Street Cut Permit Issued

    Place (1) 2” conduit and cable by directional bore between (1) 2’x2’ cut and (2) 3’x5’ cuts:

    Permit
    24-38328-RSTC
    Type
    Street Cut
    Work
    Street Cut
    Estimated cost (applicant’s figure)
    $0
    Fees
    $193
    Days from application to issue
    14
    Expires
    Jul 6, 2025

    See this permit on One Stop

  2. Permit Electrical Vacancy Permit Cancelled

    Emergency Electrical Vacancy is needed

    Permit
    24-01435-EVAC
    Type
    Electrical Vacancy
    Work
    Electrical Vacancy
    Estimated cost (applicant’s figure)
    $200
    Fees
    $40
    Contractor
    Joseph Walker IV
    Days from application to issue
    6
    Expires
    Jul 23, 2024
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  3. Code enforcement Case 23-01468-MPM Closed

    The case was filed on 04/10/2023 but has since been closed without further action.

    The city links this case to permit 21-27191-VCGEN.

  4. Permit VCC General Work Other

    To install cast iron flag bracket above the alleyway gate on the 734 side of the building only, as per materials stamped VCC approved 09/29/2021,

    Permit
    21-27191-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Mar 29, 2022

    See this permit on One Stop

  5. Permit VCC General Work Other

    to remove and replace ALL fire free shingles on rear slope with genuine slate shingles. Remove existing Fire Free Plus roofing material Repair and/or replace underlayment as necessary Install new natural slate (grey/green), using copper nails Install/repair half round copper gutters and flashing Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Metal cap-flashing on the parapets or chimneys is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapets, chimneys or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.

    Permit
    19-25469-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    10
    Expires
    Feb 26, 2020

    See this permit on One Stop

    Placed here by an address range from “734-736 Dumaine St”.

  6. Permit Renovation (Non-Structural) Other

    Minor Roofing Repair: replace Firefree slates on rear slope with genuine slates

    Permit
    19-25469-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $1,960
    Fees
    $105
    Contractor
    Robertson Roofing and Siding Inc
    Days from application to issue
    24
    Expires
    Mar 6, 2020
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

    Placed here by an address range from “734-736 Dumaine St”.

  7. Permit General Mechanical Inspection - Completed

    re-connect carter #31313

    Permit
    05MCH-06584
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $85
    Contractor
    Carter & Sons P & H
    Days from application to issue
    5