French Quarter

1106 Burgundy Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 6 permits on record here; the most recent, a VCC general work permit, was filed in February 2018. 6 are still open. On this block in the past year: 4 requests to 311 and 18 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
4,089 sq ft
Parcel
41023039

Everything on record here

6 records, newest first · 6 open

  1. Permit VCC General Work Permit Issued

    Retain two HB72S Honeywell security cameras installed on the Burgundy masonry fence. Retain two white, shielded, security light fixtures installed on the Burgundy masonry fence. Paint conduits to match the adjacent surface

    Permit
    18-06163-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 21, 2018

    See this permit on One Stop

  2. Permit VCC Paint Permit Issued

    Walls: white, flat or eggshell (to match existing) gates: French Quarter Green, semigloss (to match existing)

    Permit
    18-05151-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 15, 2018

    See this permit on One Stop

  3. Permit VCC General Work Permit Issued

    All work for service building at rearmost portion of lot only as follows: • Remove existing synthetic slate roofing material • Repair and/or replace underlayment as necessary • Install ice and water shield • Install new natural slate (grey/green), using copper nails • Install/repair half round gutters and copper flashing • Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. • Metal cap-flashing on the parapets is not allowed • Remove existing plywood fascia and install new solid wood fascia to match existing Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.

    Permit
    16-07911-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 10, 2016

    See this permit on One Stop

  4. Permit General Mechanical Application Acceptance - Approved

    INSTALL GAS WAF AND 4-TON A\C. OCTAVE J PEPPO (#7052)

    Permit
    08MCH-15411
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $70
    Contractor
    Peppo Brothers
    Days from application to issue
    5
  5. Permit Renovation (Non-Structural) Certificate of Occupancy - Issued No Meter

    REPAIRS TO INCLUDE: FLOORS, DRYWALL, PLUMBING, ELECTRICAL, HVAC AND OTHER REPAIRS AS NEEDED TO MAKE THE HOME HABITABLE VCC PERMIT# 080459

    Permit
    08BLD-06357
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $50,000
    Fees
    $450
    Contractor
    Kevin Lechleiter
    Days from application to issue
    23
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-17877
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    Ronald E Bellaci
    Days from application to issue
    10