French Quarter

931 Saint Philip Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 12 permits on record here; the most recent, a VCC paint permit, was filed in May 2025. 11 are still open. On this block in the past year: 4 requests to 311 and 22 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
6
Lot size
3,078 sq ft
Parcel
41023056

Everything on record here

12 records, newest first · 11 open

  1. Permit VCC Paint Permit Issued

    ALL WORK TO MATCH EXISTING Paint portions of millwork to match existing. Limewash facade to match existing. Repair small section of stucco front elevation Repair rotten ends of several porch floor boards.

    Permit
    25-15866-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 23, 2025

    See this permit on One Stop

  2. Permit VCC Paint Permit Issued

    ALL WORK TO MATCH EXISTING to replace bricks damaged by lighting strike all mortar and stucoo VCC approved mix paint to match existing Mortar: No more than: • 1 part Portland Cement, to • 3 parts lime, • 9 parts sand, and • enough water to form a workable mix. PREPACKAGED MIXES ARE NOT PERMITTED. The resulting mortar should range in color from white to beige but should not be grey in color. When repointing, all mortar to be tooled to match existing joint profiles. Consult with VCC staff if existing joint profile indeterminate. Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: • no greater than 1:12 part Portland Cement, to • 3 parts lime, and • 9 parts sand, • 6 lbs./cubic yard hair or fiber, and • enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: • No more than 1 Part Portland cement, • 3 Parts Lime, • 9 Parts Sand, • Enough water to form a workable mix. PREPACKAGED MIXES ARE NOT PERMITTED. LATH OF ANY KIND IS NOT ALLOWED.

    Permit
    24-19366-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Dec 26, 2024

    See this permit on One Stop

  3. Permit VCC Paint Permit Issued

    ***ALL PAINT TO MATCH EXISTING Recoat matching existing colors and minor miscellanous millwork repairs to to match existing details. Permit extended 6 months April 2022. Rdbourgogne

    Permit
    21-08580-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Keith Guy Inc
    Days from application to issue
    4
    Expires
    Sep 30, 2021

    See this permit on One Stop

  4. Permit VCC General Work Permit Issued

    remove and replace deteriorated stucco with VCC approved stucco. To repoint masonry utilizing mortar mixed and applied per the VCC standard detail sheet (attached) Any deteriorated, cracked, or broken bricks shall be replaced to match existing in color, size, material, porosity, detail, profile and exposure. All reinstalled masonry must be properly "toothed in" to existing masonry wall, using VCC mortar formula (attached). Lath of any kind is prohibited unless preapproved by VCC staff prior to installation. Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. All mortar to be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted. MORTAR IS NOT TO BE APPLIED OVER THE FACE OF THE BRICKS UNDER ANY CIRCUMSTANCES. VOIDS IN THE BRICK ARE NOT TO BE FILLED WITH MORTAR. BROKEN, DETERIORATED BRICKS MUST BE REPLACED WITH BRICKS MATCHING THE PREVIOUS. Doing so will result in a STOP WORK ORDER being placed on the property and violation case will be opened on the property. Permit extended 6 months April 2022. Rdbourgogne

    Permit
    21-06409-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Sep 11, 2021

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Application Accepted

    Replace defective stucco using VCC formula.

    Permit
    21-06409-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,000
    Fees
    $165
    Contractor
    Jeffery M Poree
    1. Application submitted

    See this permit on One Stop

  6. Permit VCC Paint Permit Issued

    To repair/replace balcony deckboard ends to match existing in Spanish Cedar To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: • Walls...Limewash with ochre & vermillion pigments • Trim...M24-1B Light tan L, semigloss • Doors/windows...M24-2B Dark Tan F2, semigloss • Shutters...M24-3B Masson Green, semigloss • Threshholds, porch floor...M22-3B Dark Grey E • Sheet Metal roofs...Roof-top red • Ironwork....Black In Benjamin Moore or equal

    Permit
    16-18940-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Hackett Cummins Construction, Keith Guy Inc
    Days from application to issue
    2
    Expires
    Dec 9, 2016

    See this permit on One Stop

  7. Permit VCC General Work Permit Issued

    minor repair to copper flashing around chimney on front slope of roof, where a leak recently appeared

    Permit
    15-14540-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 13, 2015

    See this permit on One Stop

  8. Permit VCC Paint Permit Issued

    • Walls...Limewash with ochre & vermillion pigments • Trim...M24-1BLight tan L, semigloss • Doors/windows...M24-2B Dark Tan F2, semigloss • Shutters...M24-2B Masson Green, semigloss • Threshholds, porch floor...M22-SB Dark Grey E • Sheet Metal roofs...Roof-top red • Ironwork....Black In Benjamin Moore or equal

    Permit
    14-13175-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Oct 28, 2014

    See this permit on One Stop

  9. Permit VCC General Work Other

    Historical Import Type: Enforcement VCC Permit Paint User: CABERG Tracking: Status: Permit Issued Status Date: 1/24/2012 12:00:00 AM Owner: Ann Masson Owner Address: 933 St. Philip St., New Orleans, LA 70116 Owner Phone: 566-1202 Owner Edited By: 1/24/2012 by CABERG NOTE: Paint to be Benjamin Moore for the millwork, US Heritage whitewash on the back building, and Portola Paints lime wash on main building. All colors to match existing. Main House: • Walls: lime wash with ochre and vermillion pigments • Wooden elements including doors, windows, frames, shop windows, fascia/soffit/outriggers of gallery..., semigloss: Cream • Shutters…,semigloss: Masson Green • Ironwork ...: Black • Loggia floor: Medium Grey • Shed roof of abat-vent: Dark Red Rear building: • Walls...,: White-wash • Wooden elements including doors, windows, frames,: Light Grey • Shutters…,semigloss: Masson Green Misc.: • Fountain: White Stone color • Board fence: White

    Permit
    VCCP-12-0056
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
  10. Permit General Mechanical Application Acceptance - Approved

    electric warm air furnace, three warm air furnace, Kenneth Robert (037651) (504)

    Permit
    07MCH-00548
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    Robert Refrigeration
    Days from application to issue
    5
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE ACCESSORY BUILDING

    Permit
    06ELC-31799
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $48
    Contractor
    Service Elec Of Metairie,L.L.C
    Days from application to issue
    10
  12. Permit New Construction Certificate of Occupancy - Issued No Meter

    New construction of a 1-stry service building (study) in rear of existing single family dwelling as per plans.

    Permit
    04BLD-01699
    Type
    New Construction
    Work
    New
    Estimated cost (applicant’s figure)
    $13,464
    Fees
    $255
    Days from application to issue
    150