French Quarter
928 Saint Ann Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 23 permits on record here; the most recent, a street cut permit, was filed in October 2024. 2 are still open. On this block in the past year: 20 requests to 311 and 34 calls to police.
- Zoning
- VCR-1
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 5
- Lot size
- 2,720 sq ft
- Parcel
- 41023082
Everything on record here
23 records, newest first · 2 open
-
Permit Street Cut Permit Issued
Place (1) 2” conduit and cable by directional bore between (2) 3’x5’ cuts: (29.960646, -90.066513) and (29.960328, -90.066041).
- Permit
- 24-32518-RSTC
- Type
- Street Cut
- Work
- Street Cut
- Estimated cost (applicant’s figure)
- $0
- Fees
- $175
- Days from application to issue
- 26
- Expires
- May 18, 2025
-
Permit Electrical Repair / Replacement / Addition Permit Issued
Complete re-wire renovation. Provide new service, receptacles and lighting with associated wiring.
- Permit
- 22-10365-ERPR
- Type
- Electrical Repair / Replacement / Addition
- Work
- Electrical Repair / Replacement / Addition
- Estimated cost (applicant’s figure)
- $9,625
- Fees
- $157
- Contractor
- Bryan Achary
- Days from application to issue
- 15
- Expires
- Oct 22, 2022
- Application submitted
- Application review
- Permit approved
- First inspection
- Issue date
-
Permit Interior Demolition Application Accepted
Protocol Construction is applying for interior demolition of the single family dwelling for renovation.
- Permit
- 19-19344-DEMI
- Type
- Interior Demolition
- Work
- Interior Demolition
- Estimated cost (applicant’s figure)
- $15,000
- Fees
- $135
- Contractor
- Protocol Construction LLC
- Application submitted
- Application review
- Zoning review
- Permit approved
-
Permit VCC General Work Permit Cancelled
Complete residential re wire, 10386
- Permit
- 19-39720-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Street Cut Other
1-6'x6' Cut and 1-2'x14' trench to cut off old gas service and install new 2" steel service at 928 St. Ann
- Permit
- 21-17442-RSTC
- Type
- Street Cut
- Work
- Street Cut
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Contractor
- Entergy Gas Co.
- Days from application to issue
- 6
- Expires
- Dec 22, 2021
-
Permit Construction Loop Permit Finaled
Costruction Loop Power
- Permit
- 21-02112-LOOP
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $750
- Fees
- $40
- Contractor
- Bryan Achary
- Days from application to issue
- 4
- Expires
- Jul 26, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit VCC General Work Permit Cancelled
Gas line for dryer and 2 tankless water heaters
- Permit
- 20-32926-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 13
- Expires
- Jan 20, 2021
-
Permit Mechanical Fuel Gas Permit Finaled
Gas line for dryer and 2 tankless water heaters
- Permit
- 20-32926-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $6,600
- Fees
- $65
- Contractor
- Protocal, Construction
- Days from application to issue
- 22
- Expires
- Jan 22, 2021
- Application submitted
- Application review
- Permit approved
- First inspection
- Issue date
-
Permit VCC General Work Permit Cancelled
Install 9 Air Handler ducted and ductless, 4 Condensing Units. Home renovation.
- Permit
- 20-29926-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Dec 4, 2020
-
Permit Mechanical HVAC Permit Finaled
Install 9 Air Handler ducted and ductless, 4 Condensing Units. Home renovation.
- Permit
- 20-29926-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $56,611
- Fees
- $96
- Contractor
- Protocol Construction LLC
- Days from application to issue
- 38
- Expires
- Jan 9, 2021
- Application submitted
- Application review
- Permit approved
- First inspection
- Issue date
-
Permit VCC General Work Permit Finaled
To install new galvanized wall spikes in “big size” to top of new wood carriageway gate Spikes to be painted to match color of gate (https://www.wall-spikes.com/wallspikes/wallspikes.html)
- Permit
- 20-90019-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 61
- Expires
- Sep 19, 2020
-
Permit VCC Paint Permit Finaled
To prepare for painting by washing using low water pressure (400 psi max) and/or sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed I part to 12) and to paint as follows: Walls at Facade Only: Soldalit Som 9475: KeirnShutters: Black Forest Green HC-187: Benjamin MooreDoors/Windows: Matched to Keirn 9475: Benjamin MooreTrim: Matched to Keirn 9475: Benjamin MooreIronwork: St. Philip St. Green VC180: Sherwin WilliamsFront Door: Black Forest Green HC-187: Benjamin MooreBalcony Floors and Rear Stairwell: Gray Huskie 1473: Benjamin Moore
- Permit
- 20-90007-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 61
- Expires
- Sep 19, 2020
-
Permit VCC Security Camera Application Permit Finaled
2 Cameras in front under balcony, 2 cameras in rear per attached specs received 1/8/2020
- Permit
- 20-90015-VCCAM
- Type
- VCC Security Camera Application
- Work
- VCC Security Camera Application
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Jul 8, 2020
-
Permit Electrical Service / Circuit / Feeder Permit Finaled
Complete residential re wire, 19-07502-RVNS 10386
- Permit
- 19-70342-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $214
- Contractor
- Bryan Achary
- Days from application to issue
- 836
- Expires
- Oct 6, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Service / Circuit / Feeder Permit Cancelled
Complete re wire renovation. Provide new service, receptacles, and lighting with associated wiring
- Permit
- 19-70343-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $9,625
- Fees
- $136
- Contractor
- Bryan Achary
- Application submitted
-
Permit VCC General Work Permit Finaled
ISSUED AS MASTER UNDER VCC PERMIT 18-28545-VCGEN Renovate green-rated building, per attached materials stamped VCC approved 09/05/19, including (but not limited to): Apply VCC formula stucco on St. Ann elevation, in scored pattern, and install wainscot stucco on Burgundy and Dauphine elevations, per drawings. Install new balcony overhang on St. Ann elevation, Install new cornice on St. Ann elevation, Install new paving in courtyard. NOTE: Bevolo fixtures, courtyard wall corbel, and HVAC specifications require additional review. Submit details as requested by VCC prior to purchase/fabrication and installation. REVISED 06/25/2021: Demolish partially constructed CMU wall between 928 and 922 St. Ann, per City Council denial dated 06/17/2021.
- Permit
- 19-07502-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 99
- Expires
- Mar 5, 2020
-
Permit Renovation (Structural) Inspection Phase
Converting this multi-family building into a two family. Other items added: New Carriageway gate, new security gate at entry, new cornice, new front canopy. Temporary Certficate of Occupancy until June 24, 2022 ( 1month ) waiting on VCC
- Permit
- 19-07502-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $454,010
- Fees
- $4,235
- Contractor
- John Grieshaber
- Days from application to issue
- 200
- Expires
- Mar 27, 2020
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit VCC General Work Permit Finaled
Renovate green-rated building, per attached materials stamped VCC approved 09/05/19, including: Apply VCC formula stucco on front elevation, in scored pattern, Install new balcony overhang on front elevation, Install new cornice, Install new paving and CMU stuccoed wall in courtyard. NOTE: Bevolo fixtures, courtyard wall corbel, and HVAC specifications require additional review. Submit details as requested by VCC prior to purchase/fabrication and installation.
- Permit
- 18-28545-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 365
- Expires
- Mar 5, 2020
-
Permit Renovation (Structural) Permit Cancelled
Renovation of the interior and exterior of 928 Saint Ann as well as the service wing in the rear of the property. This submittal is for the Vieux Carre Architectural Committee Meeting.
- Permit
- 18-28545-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $1
- Fees
- $188
- Application submitted
-
Permit VCC General Work Permit Finaled
Remove iron bars from the first floor windows and above alley gate on the Burgundy side Remove barbed wire on the Dauphine side Repair, repoint brick and mortar where necessary using bricks that match existing and VCC approved mortar (attached) Repair, paint, install wood balcony decking, fascia, underside Repair, paint, install wooden louvered shutters to match existing To prepare for painting by washing using a low water pressure (400 psi max); sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: Wooden elements including, windows, frames, lintels, shop windows, fascia/soffit/outriggers of gallery...White/Off-White, semigloss Front Door…Dark green,semigloss Shutters…Dark green,semigloss Ironwork...Black, gloss In response to a violation
- Permit
- 17-20353-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Dec 12, 2017
-
Permit VCC General Work Permit Cancelled
bag and dispose of all existing asbestos tiles. install storm gaurd membras as entire underlayment install the Aquahide synthetic underlayment as entire underlayment Install gray/ green Vermont slate 12"x18" (semi-weathering) secured with copper nails. Fabricate and install custom 16 oz copper step flashing along all parapet walls fabricate and install custom 16 oz copper riglet flashing to properly counter flash step flashing cut into parapet wall. fabricate and install custom 16 oz copper apron flashing fabricate and install 16 oz copper drip edge along all perimeter install new jacks and flanges remove and reset the exisint "V" tiles Fabricate and install a new 16 oz copper internal gutter inside of the upper roof parapet walls Form mortar bed on all parapet walls accordin to VCC specificaitons (see attached) Metal cap-flashing on the parapets is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.
- Permit
- 17-19311-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 21
- Expires
- Dec 27, 2017
-
Permit Renovation (Non-Structural) Other
Roofing
- Permit
- 17-19311-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $48,975
- Fees
- $458
-
Permit General Mechanical Application Acceptance - Approved
#26922
- Permit
- 06MCH-01973
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- S.Lapuyade Plbg
- Days from application to issue
- 5