French Quarter

919 Saint Louis Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 15 permits on record here; the most recent, a VCC general work permit, was filed in September 2020. 10 are still open. On this block in the past year: 5 requests to 311 and 63 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
5,616 sq ft
Parcel
41023116

Everything on record here

15 records, newest first · 10 open

  1. Permit VCC General Work Other

    • Remove existing imitation slate roofing material from main building and service ell • Repair and/or replace underlayment as necessary • Install new natural slate (semi weathering grey/green), using copper nails, on main building and service ell • Install/repair copper flashing • Install new copper downspouts • Reinstall existing terra cotta ridge tiles. Replace broken tiles as needed, to match existing. • Metal cap-flashing on the parapets or chimneys is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapets, chimneys or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.

    Permit
    20-41022-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    Mar 29, 2021

    See this permit on One Stop

  2. Permit Renovation (Non-Structural) Other

    To remove and replace imitation slate roof from front main roof and rear guest wing. To supply and install new natural Vermont Slate in Semi Weathering Gray/Green. To fabricate and install all necessary copper flashings including, drip edge, step flashing and counter flashing. To supply and install copper downspouts for the existing gutters.

    Permit
    20-41022-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $34,000
    Fees
    $345
    Contractor
    Guaranty Sheet Metal Works, In
    1. Application submitted

    See this permit on One Stop

  3. Permit VCC Paint Permit Finaled

    walls: see attched stamped formula, St Louis Pink, low luster shutters:BM 714, semigloss windows, doors and trim: white, semigloss NOTE: All shutter hardware to match adjacent surface; hinge attached to shutter should match shutter color, and hinge attached to trim should match trim. Shutter hardware should not be painted black. Additionally, outriggers under balconies or galleries should be painted white as they are not decorative ironwork elements. Failure to exactly match permit specified colors will result in a VCC violation and mandated repainting.

    Permit
    18-32203-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Contractor
    Ransdell Restorations LLC
    Days from application to issue
    1
    Expires
    Mar 28, 2019

    See this permit on One Stop

  4. Permit VCC General Work In Review

    Rear enclosure

    Permit
    18-24480-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Other

    Enclose rear open porch

    Permit
    18-24480-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $21,000
    Fees
    $248
    1. Application submitted
    2. Application review
    3. Zoning review

    See this permit on One Stop

  6. Permit Electrical Repair / Replacement / Addition Permit Issued

    renovation and repair: keep existing service and add only 2 circuits.18-19402-RNVN

    Permit
    18-24467-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $1
    Fees
    $46
    Contractor
    Donald Douglas Depp, Jr.
    Days from application to issue
    3
    Expires
    Jan 27, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  7. Permit Renovation (Non-Structural) Occupancy

    Renovate single-family dwelling as per plans. No exterior work. ***Provide windows sized for egress in each sleeping room in accordance with section R310. IRC 2015 ed

    Permit
    18-19402-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $163,346
    Fees
    $1,044
    Contractor
    Ransdell Chuck
    Days from application to issue
    15
    Expires
    Dec 26, 2018
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  8. Permit Repair Application Acceptance - Approved No Review

    EXTERIOR REPAIRS TO EXISTING SINGLE AS PER VCC PERMIT #VCCP-09-0053.

    Permit
    09BLD-05751
    Type
    Repair
    Work
    Repair
    Estimated cost (applicant’s figure)
    $0
    Fees
    $90
    Days from application to issue
    5
  9. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE- RELEASED FROM BUILDING AND SENT TO ENTERGY 09/23/2009.

    Permit
    09ELC-01130
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Kendrick Electric LLC
    Days from application to issue
    10
  10. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE- RELEASED FROM BUILDING AND SENT TO ENTERGY 09/18/2009.

    Permit
    09ELC-01131
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Kendrick Electric LLC
    Days from application to issue
    10
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE- RELEASED FROM BUILDING AND SENT TO ENTERGY 09/18/2009.

    Permit
    09ELC-01132
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $117
    Contractor
    Kendrick Electric LLC
    Days from application to issue
    10
  12. Permit Renovation (Non-Structural) Application Acceptance - Approved No Review

    INTERIOR ONLY - KITCHEN AND BATH REPAIR

    Permit
    08BLD-08657
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $44,000
    Fees
    $270
    Days from application to issue
    5
  13. Permit Mechanical Permit Issuance Active

    electric water heater, Gail Halbert (2989)

    Permit
    07MCH-05121
    Type
    Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
  14. Permit General Mechanical Application Acceptance - Approved

    electric water heater, Gail Halbert (2990) (504)

    Permit
    07MCH-05136
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $20
    Contractor
    Halbert's Plbg.
    Days from application to issue
    5
  15. Permit Certificate of Occupancy Certificate Issued No Meter

    CERTIFICATE OF OCCUPANCY FOR A HOME BASED BUSINESS "GACHELIN ASSOCIATES" AS PER CASE #3142.

    Permit
    06OCC-05679
    Type
    Certificate of Occupancy
    Work
    NA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $150