French Quarter

830 Saint Philip Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 26 permits on record here; the most recent, a VCC general work permit, was filed in March 2023. 10 are still open. On this block in the past year: 5 requests to 311 and 17 calls to police.

Zoning
VCR-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
6,949 sq ft
Parcel
41023165

Everything on record here

26 records, newest first · 10 open

  1. Permit VCC General Work Other

    Replace exisitng Bourbon-side rooftop condenser with new American Standard 4A7A4036N1 unit, per attached materials stamped VCC approved 05/09/2023. New unit must not be visible from right of way after installation.

    Permit
    23-07390-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    40
    Expires
    Nov 9, 2023

    See this permit on One Stop

  2. Permit Mechanical HVAC Permit Cancelled

    Replace AC condenser in the roof and Air Handler in closet

    Permit
    23-07763-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Keith J Hunter
    1. Application submitted

    See this permit on One Stop

  3. Permit Mechanical HVAC Inspection Phase

    Replace condenser on roof and air handler in closet

    Permit
    23-07390-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $17,956
    Fees
    $270
    Contractor
    Keith J Hunter
    Days from application to issue
    61
    Expires
    Nov 17, 2023
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  4. Permit VCC General Work Permit Issued

    to repair/ repalace stucco where necessary. ONLY VCC mortar and stucco mix is approved. to repir window frames and shutteres were necessary. ALL WORK TO MATCH EXISITNG paint all surfaces to match existing. Lath of any kind is prohibited unless preapproved by VCC staff prior to installation. Failure to exactly match materials, paint color, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. All stucco and mortar be mixed using the VCC recipe (attached) with a maximum of 1 part Portland Cement, to 3 parts lime, to 9 parts sand, and enough water to form a workable mix. Prepackaged mixes are not permitted.

    Permit
    22-08146-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    4
    Expires
    Sep 28, 2022

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Cancelled

    The exterior building stucco has many cracks and needs resealing and repainted. The galleries, window frames and shutters also need to be repaired in some areas and repainted. All construction is repair work to restore the exterior of the building and there will be no changes to the exterior of the building. All paint colors will be the same as what is currently on the building.

    Permit
    22-08146-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $72,000
    Fees
    $630
    Contractor
    Howard Kevin
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Permit Cancelled

    Repair alley gates to match existing, replace gutters to match existing, touch up paint to match existing

    Permit
    21-05783-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,000
    Fees
    $120
    1. Application submitted

    See this permit on One Stop

  7. Permit VCC General Work Permit Issued

    repair gates to match touch up paint, all to match existing Insall new gutters, halfround painted aluminum, in this same location as existing gutters

    Permit
    21-05783-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    9
    Expires
    Sep 18, 2021

    See this permit on One Stop

  8. Permit VCC General Work Other

    Per attached materials stamped VCC approved 03/09/2021: • Remove existing Fire Free Plus roofing material • Repair and/or replace underlayment as necessary • Install new natural slate (grey/green), using copper nails • Install/repair half round copper gutters and flashing • Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. • Metal cap-flashing on the parapets or chimneys is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapets, chimneys or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.

    Permit
    21-06282-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 9, 2021

    See this permit on One Stop

  9. Permit Renovation (Non-Structural) Application Accepted

    Roofing replacement.

    Permit
    21-06282-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $59,550
    Fees
    $540
    1. Application submitted

    See this permit on One Stop

  10. Permit VCC General Work Permit Issued

    Revised by ebvogt 05/20/2021: Replace all natural wood posts, railings and spindles on second and third floor exterior balconies of the rear dependency. All work must match original, per VCC design guidelines and VCC attachment except as otherwise noted. New rail to use attached handrail detail #3 with the following exceptions: rail may be 42" tall and pickets to be between 3/4" - 1" square. All work must conform to the VCC policies & guidelines. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure unless otherwise noted. Failure to exactly match materials, details, profiles, exposures, and/or VCC mortar specified in the permit and associated attachments will result in a VCC Stop Work Order, VCC violation, and mandated repair of improper work.

    Permit
    21-02821-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    32
    Expires
    Sep 8, 2021

    See this permit on One Stop

    Placed here by an address range from “830-832 St Philip St”.

  11. Permit Renovation (Non-Structural) Permit Issued

    Replace all posts, railings and spindles on second and third floor exterior balconies/porches of dependency building for the 830 St. Philip Condominium Association located at 830-832 St. Philip Street -- due to damage from Hurricane Zeta and underlying decay discovered as a result of that damage. See attached proposal from contractor for more details on scope of work and materials. Attached photos also show damage from Zeta and the area where all decaying or damaged posts, railings and spindles will be replaced. New railings and spindles will be built in style similar to existing dependency stairway spindles/railings and as close to style of current balcony/porch railings and spindles as possible based on modern lumber sizes.

    Permit
    21-02821-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $8,500
    Fees
    $248
    Contractor
    Oscar O Marquez
    Days from application to issue
    110
    Expires
    Nov 21, 2021
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

    Placed here by an address range from “830-832 St Philip St”.

  12. Permit VCC General Work Permit Cancelled

    Kitchen cabinets, polish floor, re-wire, install panel, reconnect sink, dishwasher, paint, replace insulation under bathroom Interior work only. VCC approval is required for any exterior work, including repairs, and is not included in the scope of this permit.

    Permit
    20-26943-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Nov 6, 2020

    See this permit on One Stop

  13. Permit VCC General Work Permit Cancelled

    New Romex wiring and service change

    Permit
    20-26914-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    11
    Expires
    Nov 11, 2020

    See this permit on One Stop

  14. Permit Electrical Service / Circuit / Feeder Permit Issued

    New Romex wiring and service change

    Permit
    20-26914-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $130
    Contractor
    Anthony Melancon Jr
    Days from application to issue
    12
    Expires
    Nov 12, 2020
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  15. Permit Renovation (Non-Structural) Other

    Kitchen cabinets, polish floor, re-wire, install panel, reconnect sink, dishwasher, paint, replace insulation under bathroom Interior work only. VCC approval is required for any exterior work, including repairs, and is not included in the scope of this permit.

    Permit
    20-04450-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $19,300
    Fees
    $330
    Days from application to issue
    66
    Expires
    Nov 18, 2020
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. First inspection
    7. Issue date

    See this permit on One Stop

  16. Permit VCC General Work Other

    to remove and replace approxiamately 50 linear feet of gutters on the 3rd floor at the rear of the property. All new gutters to match existing half round style. New gutters will be aluminum and will be painted to match the adjacent surface. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.

    Permit
    19-31849-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Apr 10, 2020

    See this permit on One Stop

  17. Permit Renovation (Non-Structural) Other

    We will be replacing 50 linear feet of gutters on the 3rd floor at the back of the building with new VCC approved half round gutters.

    Permit
    19-31849-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $128
    1. Application submitted

    See this permit on One Stop

  18. Permit Electrical Repair / Replacement / Addition Other

    panel change

    Permit
    19-17590-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $1
    Fees
    $40
    Contractor
    Douglas HD Electric LLC Douglas
    1. Application submitted

    See this permit on One Stop

  19. Permit VCC General Work Permit Finaled

    Remove deteriorated floor boards and fascia boards as needed, Install new 5/4x4 T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). Back prime and paint millwork, semigloss, to match existing. (Underside of gallery to be painted white, top and sides of balcony boards to be painted medium/dark gray) Retain security camera on Dauphine side of first floor, paint wiring and housing of camera to match adjacent wall surface. (Previously permitted, SW "Meadowlark" 7522 flat or satin finish) Remove and replace deteriorated and damaged portions of St. Philip side downspouts. Install new galvanized downspouts to match existing in dimension and material. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure NOTE: Permit issued in response to violations. Work shall commence no less than 30 days after permit is issued. Work must be completed no less than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. Permit reissued for the downspout replacement only 2017.05.26

    Permit
    16-36899-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 22, 2017

    See this permit on One Stop

  20. Permit VCC Paint Permit Cancelled

    walls: Hc-143 Benjamin Moore (to match existing) shutters: Hc-142 Benjamin Moore ( to match existing) windows and doors: Hc-139 Benjamin Moore (to match existing) trim: Hc-141 Benjamin Moore (to match existing) ironwork: Hc-142 Benjamin Moore (to match existing)

    Permit
    16-40375-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    5
    Expires
    Jun 14, 2017

    See this permit on One Stop

  21. Permit Renovation (Non-Structural) Other

    Repair deck deterioration 2nd floor gallery; repair broken downspout on left side of building. Retain security camera

    Permit
    16-36899-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $500
    Fees
    $98

    See this permit on One Stop

  22. Permit VCC General Work Permit Finaled

    Paint courtyard facing walls to match existing: Walls...Meadowlark, SW2054 Repair third floor balcony column and railing on Dumaine elevation to match existing in color, size, material, detail, profile and exposure Repair fourth floor window sill to match existing in color, size, material, detail, profile and exposure 2016.04.05 - Permit not picked up.

    Permit
    14-36400-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    3
    Expires
    May 20, 2015

    See this permit on One Stop

  23. Permit VCC General Work Permit Issued

    install one (1) Vivotek FD 8134V security camera to Dauphine side of facade, at least 8' 6" above the sidewalk paint the camera housing to match the adjacent wall color

    Permit
    14-17655-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    1
    Expires
    Dec 5, 2014

    See this permit on One Stop

  24. Permit General Mechanical Permit Finaled

    BLM312-Ali Mesbah-239-7277-pd chk# 8354-Line, WH

    Permit
    13-02863-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Ali Mesbah
    Days from application to issue
    0
    Expires
    Jul 29, 2013

    See this permit on One Stop

  25. Permit General Mechanical Permit Finaled

    BLM312-Matthew Haydel-348-9646-pdchk# 5636-A/C, Waf

    Permit
    12-28455-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Days from application to issue
    0
    Expires
    Apr 25, 2013

    See this permit on One Stop

  26. Permit Electrical Service / Circuit / Feeder Permit Issued

    REWIRE- 12-26120

    Permit
    12-27100-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $118
    Contractor
    Hoai Trong Do
    Days from application to issue
    0
    Expires
    Apr 15, 2013

    See this permit on One Stop