French Quarter
500 Dauphine Street is in French Quarter, zoned VCR-1 (French Quarter residential, preserving the area's character). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 16 permits on record here; the most recent, a VCC general work permit, was filed in March 2020. 4 are still open. On this block in the past year: 0 requests to 311 and 50 calls to police.
- Zoning
- VCR-1
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 5
- Lot size
- 2,865 sq ft
- Parcel
- 41023191
Everything on record here
16 records, newest first · 4 open
-
Permit VCC General Work Other
To pave narrow strip in alleyway behind rear building with Tennessee Crab Orchard flagstone to match the existing flagstone at the sidewalk. Work as per Architecture Committee approval of 03/10/2020 and materials stamped VCC approved 03/19/2020.
- Permit
- 20-25057-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 34
- Expires
- Oct 23, 2020
Placed here by an address range from “500-508 Dauphine St”.
-
Permit VCC General Work In Review
Lay flagstone in place of damaged concrete in existing carriageway on our property to beautify area.
- Permit
- 19-27720-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit VCC General Work In Review
Attach a stainless steel and aluminum storage rack to the back of our guest house. It will be 14 inches deep and on our property in the carriageway that is visible through the 30 inch gate on Dauphine st.
- Permit
- 19-27719-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Other
Lay flagstone in place of damaged concrete in existing carriageway.
- Permit
- 19-27720-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $750
- Fees
- $98
- Contractor
- Bradley H Wegman
- Application submitted
-
Permit Accessory Structure Other
Attach a stainless steel and aluminum storage rack to the back of our guest house. It will be 14 inches deep and on our property in the carriageway that is visible through the 30 inch gate on Dauphine st.
- Permit
- 19-27719-ACCS
- Type
- Accessory Structure
- Work
- Accessory Structure
- Estimated cost (applicant’s figure)
- $3,000
- Fees
- $113
- Contractor
- Bradley H Wegman
- Application submitted
-
Permit VCC Paint Permit Finaled
ironwork: black, semigloss (to match existing) remove wood over existing metal beam and de-rust, prime, and paint, and then re-attach the wood. all collars on ironwork have been removed will replace with new collars (see attached) stamped VCC approved 4/30/19 all new collars will be installed level at the same height of the original collars and will be painted black to match existing
- Permit
- 19-12057-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 14
- Expires
- Oct 30, 2019
-
Permit VCC General Work In Review
Install 2 bollards to protect from cars/trucks the 2 corner gallery posts at corner of St. Louis and Dauphine, identical to the one in front of our courtyard gate. (The gallery posts have been hit at least 3 times by vehicles and we have had to repair and replace the posts and the gallery.) These posts would be be the color of the rest of the iron work on the house and 6" in diameter and 48" tall with a round ball on the top.
- Permit
- 19-09548-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit New Construction Other
Install 2 bollards to protect from cars/trucks the 2 corner gallery posts at corner of St. Louis and Dauphine, identical to the one in front of our courtyard gate. (The gallery posts have been hit at least 3 times by vehicles and we have had to repair and replace the posts and the gallery.) These posts would be be the color of the rest of the iron work on the house and 6" in diameter and 48" tall with a round ball on the top.
- Permit
- 19-09548-NEWC
- Type
- New Construction
- Work
- New Construction
- Estimated cost (applicant’s figure)
- $1,500
- Fees
- $195
- Application submitted
-
Permit VCC General Work Permit Finaled
To remove ten (10) existing steel gallery poles and install ten (10) new steel gallery poles exactly matched to existing in design, size, color, and location. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work.
- Permit
- 17-37898-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 6
- Expires
- May 15, 2018
-
Permit Renovation (Non-Structural) Other
Replace existing 10 steel gallery posts. They will look identical to the current posts regarding color, size, and placement. The current ones are getting severely rusted. One was recently hit and damaged by a car.
- Permit
- 17-37898-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $7,850
- Fees
- $150
- Contractor
- Brad Wegman, Wegman Bradley H
- Days from application to issue
- 10
- Expires
- May 16, 2018
-
Permit Sidewalk Repair Other
Temporary removal of flagstone for DPW work and replacement of flagstone when work is done.
- Permit
- 16-26275-RSWR
- Type
- Sidewalk Repair
- Work
- Sidewalk Repair
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Bradley H Wegman
-
Permit VCC Paint Permit Issued
Repair stucco and repaint in original/existing color.
- Permit
- 15-12320-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 7
- Expires
- Oct 30, 2015
-
Permit VCC General Work Permit Finaled
To install four (4) Swann SWNHD-820CAM turret security cameras mounted to underside of gallery per cut sheet submitted 11/15/14 & stamped VCC approved 11/17/14. One placed at Toulouse end of gallery, and three at corner Cameras shall be painted to match adjacent building surface. All conduit and wiring shall be placed along the inside corners of building surfaces as much as possible, such as along gallery/balcony purlins at the deck line, and painted to match the adjacent surfaces
- Permit
- 14-35349-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 5
- Expires
- May 20, 2015
-
Permit Renovation (Non-Structural) Permit Cancelled
Install 4 small (6"x2") white security cameras (Swann SWNHD-820CAM) on the underside of our first floor gallery. We will hide the wires in PVC conduit.; 2016.04.05 - Permit not picked up.
- Permit
- 14-35349-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $1,500
- Fees
- $105
-
Permit VCC General Work Permit Finaled
Repaint underside of gallery using Sherwin Williams Duration paint in existing (white BM 969) color.
- Permit
- 14-35238-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- May 12, 2015
-
Permit Renovation (Non-Structural) Permit Cancelled
Repaint underside of gallery using Sherwin Williams Duration paint in existing (white BM 969) color. 2016.04.05 - Permit not picked up.
- Permit
- 14-35238-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $500
- Fees
- $98