French Quarter
615 Ursulines Avenue is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 13 permits on record here; the most recent, a VCC general work permit, was filed in April 2021. 6 are still open. On this block in the past year: 2 requests to 311 and 55 calls to police.
- Zoning
- VCR-2
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 6
- Lot size
- 3,262 sq ft
- Parcel
- 41023245
Everything on record here
13 records, newest first · 6 open
-
Permit VCC General Work In Review
Proposal to install new metal gate at front of entrance alcove, per materials received 04/12/2021.
- Permit
- 21-10616-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Application Accepted
Installation of security gates on two vestibules.
- Permit
- 21-10616-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $9,000
- Fees
- $158
- Contractor
- S Metalworks LLC
- Application submitted
-
Permit VCC General Work Application Accepted
roof repairs
- Permit
- 20-46345-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Other
roof repairs
- Permit
- 20-46345-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $9,000
- Fees
- $158
- Contractor
- Eric Lassair
- Application submitted
-
Permit VCC Paint Permit Issued
walls: BM dark beige 2165-40, flat or eggshell Shutters: dark green, semigloss, (see attached color formula) trim, doors and windows: white, semigloss ironwork: black, semigloss
- Permit
- 18-03635-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Jul 31, 2018
-
Permit VCC Paint In Review
Paint to match existing colors, will contact RDB with exact color names and for swatch review
- Permit
- 18-01241-VCPNT
- Type
- VCC Paint
- Work
- VCC Paint
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit VCC General Work Permit Finaled
• Remove deteriorated floor boards, stringers, and fascia boards from second floor balcony on the Ursulines elevation. • Install new 3"x4" beaded stringers, 5/4x4 T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). • All repair/replacement work shall match existing in color, size, material, detail, profile and exposure
- Permit
- 17-35844-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 1
- Expires
- Apr 26, 2018
-
Permit Renovation (Non-Structural) Permit Cancelled
Replace 24' of 2nd floor balcony. Renovate purlins, fascia & decking (primed) to match existing. Painting by others.
- Permit
- 17-35844-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $4,200
- Fees
- $128
-
Permit VCC General Work Permit Cancelled
Install iron gates at 615 entry and 617 entry per sketch.
- Permit
- 16-01006-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Renovation (Non-Structural) Other
Install iron gates at 615 entry and 617 entry for bakery per sketch and VCC. Gates to remain open during hours of operation.
- Permit
- 16-01006-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $6,000
- Fees
- $135
-
Permit VCC General Work Permit Cancelled
Install new 12-18 inch dark green canvas awning fixed to Ursulines side balcony.
- Permit
- 15-18504-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $7,000
- Fees
- $0
-
Permit VCC General Work Permit Issued
Remove deteriorated floor boards, stringers, and fascia boards. Install new 3"x4" beaded stringers, 5/4x4 S2S T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposure
- Permit
- 15-18403-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $7,000
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Dec 18, 2015
-
Permit Mechanical Annual Fee Pending
- Permit
- 03MCH-05895
- Type
- Mechanical
- Work
- Stationary Equipment Annual
- Estimated cost (applicant’s figure)
- $0
- Fees
- $67