French Quarter
931 Chartres Street is in French Quarter, zoned VCR-2 (French Quarter residential, with somewhat higher density than VCR-1). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 44 permits on record here; the most recent, a VCC general work permit, was filed in September 2026. 40 are still open. On this block in the past year: 5 requests to 311 and 47 calls to police.
- Zoning
- VCR-2
- Historic district
- Vieux Carré (Full control)
- National Register
- Vieux Carre
- Council district
- C
- Ward
- 5
- Lot size
- 7,631 sq ft
- Parcel
- 41023273
Everything on record here
44 records, newest first · 40 open
-
Permit VCC General Work Permit Issued
ALL PAINT COLORS TO MATCH EXISTING REPAIR/ REPLACE WHERE NECESSARY TO MATCH EXISTING Remove deteriorated floor boards, stringers, and fascia boards. Install new 3"x4" beaded stringers, 5/4x4 wood T&G floorboards, and 7/8" fascia with ½" bead, all as per VCC Standard Detail Sheet No. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposure
- Permit
- 26-27778-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 0
- Expires
- Mar 24, 2027
- Final VCC
- Application Submitted Complete
- Application Review Complete
- Permit Approved Complete
- Permit Issued Complete
- Vieux Carré Commission Approved
-
Permit Renovation (Structural or Non-structural) Permit Issued
Repairs to the balcony. Sand, and Paint, replace any damaged or rotten wood. Paint colors to match existing.
- Permit
- 26-27778-RENO
- Type
- Renovation (Structural or Non-structural)
- Work
- Renovation (Structural or Non-structural)
- Estimated cost (applicant’s figure)
- $31,170
- Fees
- $340
- Contractor
- Roof Technologies, L.L.C.
- Days from application to issue
- 33
- Expires
- Apr 26, 2027
- Building Paid
- Building Plan Review Paid
- Application Submitted Complete
- Application submitted
- Parks and Parkways Tree Review Complete
- Zoning Review Complete
- Zoning Complete
- Zoning review
- Plan Review Complete
- Property Management - ROW Complete
- Application Review Complete
- Permit Intake Complete
- Application review
- Plan Review Complete
- Permit Approved Complete
- Sub-Permits Issued Complete
- Permit Issued Complete
- Plan review
- Permit approved
- Issue date
-
Permit VCC General Work Other
Remove and replace 4 ton rooftop AC unit with new comparable unit in the same location, per materials stamped VCC approved 08/04/2026.
- Permit
- 26-21926-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 8
- Expires
- Feb 4, 2027
- Application Submitted Complete
- Application Review Complete
- Permit Approved Complete
- Permit Issued Complete
- Vieux Carré Commission Complete
- Permit Picked Up Complete
-
Permit Mechanical HVAC In Review
remove and replace 4 ton AC system with electric heat
- Permit
- 26-21926-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $13,040
- Fees
- $102
- VCC Review Unpaid
- Air Conditioning Unpaid
- Mechanical Unpaid
- Warm Air Furnaces Unpaid
- Warm Air Furnace
- Rough Mech HVAC Comm
- Air Conditioning
- Application Submitted Complete
- Application submitted
- Application Review Complete
- Mechanical Permit Review Complete
- Application review
-
Permit VCC General Work Permit Finaled
Remove existing roofing material Repair and/or replace underlayment as necessary Install new natural slate (grey/green), using copper nails Install/repair half round copper gutters and flashing Install/reinstall ceramic or concrete V-style or terra cotta ridge tiles. Replace broken tiles as needed, to match existing. Install new copper cap flashing on parapets due to tar and damage Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing chimneys or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.
- Permit
- 22-09748-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 8
- Expires
- Oct 13, 2022
-
Permit Renovation (Non-Structural) Occupancy
New slate roof as per estimate to repair Ida damage.No mechanical, electrical or plumbing.
- Permit
- 22-09748-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $236,466
- Fees
- $1,868
- Contractor
- Allied Xteriors
- Days from application to issue
- 19
- Expires
- Oct 19, 2022
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit Renovation (Non-Structural) Other
Renovation, scope of work to include paint, sanding floors, new cabinets, new light fixtures. No electrical or plumbing
- Permit
- 18-20191-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $6,800
- Fees
- $95
- Days from application to issue
- 0
- Expires
- Dec 18, 2018
- Application submitted
- Application review
- Zoning review
- Permit approved
- Issue date
-
Permit Renovation (Non-Structural) Permit Finaled
Exterior painting, stucco and iron work. Repair rotten wood where necessary, as per 14-26365-VCGEN.
- Permit
- 14-26310-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $60,000
- Fees
- $540
- Contractor
- Yazoo Restorations
- Days from application to issue
- 25
- Expires
- Mar 16, 2015
-
Permit VCC General Work Permit Issued
Repair stucco finish as needed using VCC approved stucco formula: Stucco: Base coat consists of 2 coats, doubled up work of 5/8" total thickness. Proportioned as follows: no greater than 1:12 part Portland Cement, to 3 parts lime, and 9 parts sand, 6 lbs./cubic yard hair or fiber, and enough water to form a workable mix. Finish coat is 1/4" in total thickness proportioned as follows: No more than 1 Part Portland cement, 3 Parts Lime, 9 Parts Sand, Enough water to form a workable mix. Note: RATIO OF PORTLAND CEMENT NOT TO EXCEED 1:12. Remove deteriorated fascia boards Install new 7/8" fascia with ½" bead, as per VCC Standard Detail Sheet No. 12 (attached). All repair/replacement work shall match existing in color, size, material, detail, profile and exposure Install new iron, column bases to match existing on 925 Chartres To prepare for painting by sanding (rotary sanders cannot be used), making minor millwork and masonry repairs as necessary to match existing conditions (masonry mix must be soft, with maximum Portland cement content not to exceed 1 part to 12) and to paint as follows to match existing conditions: Walls...red, flat or satin finish Wooden elements including doors, windows, frames, fascia/soffit/outriggers of gallery...white, semigloss Shutters…Hunter Green,semigloss Iron gallery railing and columns ...Black This permit prohibits the application of the following exterior coating materials and paints: sealers, ceramic coatings/paints, elastomeric
- Permit
- 14-26365-VCGEN
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 16
- Expires
- Mar 7, 2015
-
Permit General Mechanical Other
Work Descripton: Troy Jeffreys 232-2939 check4580 elec waf, a/c Historical Import Type: Permits Mechanical Residential General Mechanical User: JCRUSE Tracking: 86172103779 Status: Closed Status Date: 4/5/2012 12:00:00 AM Owner: Conrad Shimmel Owner Address: 931 Chartes Owner Edited By: 3/1/2012 by JCRUSE
- Permit
- 12MCH-01645
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $65
- Contractor
- A Jeffreys Troy
- Days from application to issue
- 0
- Expires
- Sep 1, 2012
Placed here by a close spelling of the street from “931 Chartes St G Apt”.
-
Permit VCC General Work Other
Historical Import Type: Enforcement VCC Permit General User: HIRVIN Tracking: 86143716227 Status: Permit Issued Status Date: 1/27/2012 12:00:00 AM Owner: Rue Chartres Association Owner Edited By: 1/27/2012 by HIRVIN To tuck-point the rear wall of the rear service building as necessary as follows: - The wall section measures approximatley 28' x 55' - The mortar mix must be "soft" with the Portland cement content not to exceed more than one part to 12
- Permit
- VCCP-12-0070
- Type
- VCC General Work
- Work
- VCC General Work
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
-
Permit Electrical Permit Issuance Active
RENOVATIONS- 11BLD-08041
- Permit
- 11ELC-12896
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $64
-
Permit Residential Permit Issuance Active
NON-STRUCTURAL REPAIRS TO EXISTING SINGLE FAMILY CONDO.
- Permit
- 11BLD-08041
- Type
- Residential
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $9,000
- Fees
- $105
-
Permit Electrical Permit Issuance Active
VACANCY
- Permit
- 11ELC-02479
- Type
- Electrical
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
-
Permit Electrical Repair / Replacement / Addition Permit Issuance - Active
VACANCY
- Permit
- 11ELC-02102
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07149
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07150
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07151
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07152
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07153
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07154
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07155
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07156
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Permit Issuance Active
INCREASE
- Permit
- 10ELC-07157
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07158
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07159
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Permit Issuance Active
INCREASE
- Permit
- 10ELC-07160
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07161
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07162
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07163
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07164
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Service / Circuit / Feeder Permit Issuance - Active
INCREASE
- Permit
- 10ELC-07165
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $70
- Contractor
- Margiotta Elec
- Days from application to issue
- 0
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
REPAIRS- 09COM-07474
- Permit
- 10ELC-02142
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Stephens Elect Ser
- Days from application to issue
- 10
-
Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved
REPAIRS- 09COM-07474
- Permit
- 10ELC-02143
- Type
- Electrical Repair / Replacement / Addition
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Stephens Elect Ser
- Days from application to issue
- 10
-
Permit General Mechanical Application Acceptance - Approved
rll-m-casebonne-340-8776-1-elec-wh-ck-4636
- Permit
- 09MCH-12904
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $20
- Contractor
- Casebonne Plbg.& Repairs LLC
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
rll-m-casebonne-340-8776-1-elec-wh-ck-4636
- Permit
- 09MCH-12905
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $20
- Contractor
- Casebonne Plbg.& Repairs LLC
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
rll-m-casebonne-340-8776-1-elec-wh-ck-4636
- Permit
- 09MCH-12906
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $20
- Contractor
- Casebonne Plbg.& Repairs LLC
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
rll-m-casebonne-340-8776-1-elec-wh-ck-4636
- Permit
- 09MCH-12907
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $20
- Contractor
- Casebonne Plbg.& Repairs LLC
- Days from application to issue
- 5
-
Permit General Mechanical Application Acceptance - Approved
rll-m-casebobbe-340-8776-1-elec-wh-ck-4636
- Permit
- 09MCH-12908
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $20
- Contractor
- Casebonne Plbg.& Repairs LLC
- Days from application to issue
- 5
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
No Exterior Work Allowed. Damage repairs from broken water heater on the 2nd level. Sheetrocking,Cabintery,Electrical and others.
- Permit
- 09COM-01473
- Type
- Renovation (Non-Structural)
- Work
- NA
- Estimated cost (applicant’s figure)
- $25,000
- Fees
- $175
- Days from application to issue
- 5
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
No Exterior Work Allowed. Water damage repairs to the 1st floor from broken heater on the 2nd floor above. Electrical,Cabinetry,Sheetrocking and others.
- Permit
- 09COM-01474
- Type
- Renovation (Non-Structural)
- Work
- NA
- Estimated cost (applicant’s figure)
- $25,000
- Fees
- $175
- Days from application to issue
- 5
-
Permit Renovation (Non-Structural) Application Acceptance - Approved No Review
INTERIOR REPAIRS ONLY: CLOSETS, FLOOR JOIST AND FLOORING, BATH TO A CONDOMINIUM LOCATED 931 CHARTRES UNIT 10.
- Permit
- 08COM-00289
- Type
- Renovation (Non-Structural)
- Work
- NA
- Estimated cost (applicant’s figure)
- $5,000
- Fees
- $75
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-20275
- Type
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $68
- Contractor
- Stuart Electric Inc
-
Permit Building
GENERAL REPAIRS MULTI-FAMILY DWELLING REPAIRS TO EXISTING MULTI-FAMILY DWELLING AS PER VCC #030802. BRICK REPAIRS, STUCCO PATCH, METAL FLASH.
- Permit
- B03006208
- Type
- Building
- Days from application to issue
- 0