French Quarter

819 Royal Street is in French Quarter, zoned VCC-1 (French Quarter small-scale shops and services that fit nearby homes). It is in the French Quarter, where the Vieux Carré Commission reviews exterior work before it starts. The city has 20 permits on record here; the most recent, a VCC security camera application permit, was filed in April 2025. 16 are still open. On this block in the past year: 7 requests to 311 and 107 calls to police.

Zoning
VCC-1
Historic district
Vieux Carré (Full control)
National Register
Vieux Carre
Council district
C
Ward
5
Lot size
8,691 sq ft
Parcel
41023292

Everything on record here

20 records, newest first · 16 open

  1. Permit VCC Security Camera Application Other

    To install one Arlo security camera to be pole mounted at the rear of the property per materials stamped VCC approved 04/25/2025.

    Permit
    25-11360-VCCAM
    Type
    VCC Security Camera Application
    Work
    VCC Security Camera Application
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    12
    Expires
    Oct 25, 2025

    See this permit on One Stop

  2. Permit VCC Security Camera Application In Review

    We will be installing two security cameras, one on Royal St. & one in the back parking lot area.

    Permit
    24-25784-VCCAM
    Type
    VCC Security Camera Application
    Work
    VCC Security Camera Application
    Estimated cost (applicant’s figure)
    $3,000
    Fees
    $0
    Contractor
    Crimetek Integrated Security Systems

    See this permit on One Stop

  3. Permit Electrical Vacancy Other

    Lights out over 6 months

    Permit
    23-01551-EVAC
    Type
    Electrical Vacancy
    Work
    Electrical Vacancy
    Estimated cost (applicant’s figure)
    $100
    Fees
    $40
    Contractor
    Lawrence R Margiotta
    1. Application submitted
    2. Application review

    See this permit on One Stop

    Placed here by the building address from “821 Royal St, Unit #6”.

  4. Permit VCC General Work In Review

    Remove roof on carriage house, lamarite synthetic material, repair/replace underlayment, install new natural slate using copper nails, install/repair half round copper gutters and flashing

    Permit
    20-34302-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Other

    Remove roof on carriage house, lamarite synthetic material, repair/replace underlayment, install new natural slate using copper nails, install/repair half round copper gutters and flashing

    Permit
    20-34302-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $7,600
    Fees
    $150
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved

    See this permit on One Stop

  6. Permit VCC General Work Permit Issued

    Remove deteriorated floorboards from balcony Install new T&G floorboards to match existing and to paint to match existing

    Permit
    20-90011-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    72
    Expires
    Sep 19, 2020

    See this permit on One Stop

    Placed here by an address range from “819-821 Royal St”.

  7. Permit VCC Paint Permit Finaled

    Permit to correct VCC Violations: •Remove vegetation and/or overgrowth from courtyard •Repair cracks in stucco utilizing the VCC standard detail sheer (attached) •Repair/replace window sill on 2rd floor of St. Ann elevation, as needed. •Remove any unused wires on the property. • To prepare for painting by sanding (rotary sanders cannot be used), and to paint as follows to match existing conditions: •Walls...Market Square Tavern Shell, W81-0330, flat or eggshell finish •Trim...Simulate White Wash, W970, semigloss All repair/replacement work shall match existing in color, size, material, detail, profile and exposure. Failure to exactly match materials, details, profiles, exposures, or VCC mortar as specified in permit will result in a VCC violation and mandated repair of improper work. NOTE: Permit issued in response to violations. Work shall commence within 30 days from the date of permit issuance. Work must be completed no more than 60 days after work begins. Owner will call VCC for final inspection upon completion of work. Penalty fees may apply because of improper or unauthorized work.

    Permit
    19-04538-VCPNT
    Type
    VCC Paint
    Work
    VCC Paint
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Aug 11, 2019

    See this permit on One Stop

  8. Permit VCC General Work Permit Issued

    • Remove existing Lamarite synthetic roofing material • Repair and/or replace underlayment as necessary • Install new natural slate (grey/green), using copper nails • Install/repair as necessary half round copper gutters and flashing • Install/reinstall terra cotta ridge tiles. Replace broken tiles as needed, to match existing. • Metal cap-flashing on the parapets is not allowed Note: Trash chutes are required for removal of debris from all roofs All work must conform to standard VCC policies & guidelines Permit does not allow for cap flashing on parapet or surrounding walls Torch-applied roofing is not permitted in the Vieux Carré. All repair/replacement work shall match existing in color, size, material, detail, profile and exposure.

    Permit
    17-24492-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jan 18, 2018

    See this permit on One Stop

  9. Permit Renovation (Non-Structural) Other

    Replace the Lamarite shingle with new natural Vermont Slate color to be semi weathering gray/green; fabricate and install new copper step flashings, counter flashings and drip edge.

    Permit
    17-24492-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $34,000
    Fees
    $345
    Contractor
    Guaranty Sheet Metal Works Inc

    See this permit on One Stop

  10. Permit VCC General Work Permit Issued

    infill pool in courtyard To infill existing pool by punching holes as required in the bottom, fill with layer of gravel and then garden soil, to create in-ground planter. Existing coping to remain.

    Permit
    13-28218-VCGEN
    Type
    VCC General Work
    Work
    VCC General Work
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $0
    Days from application to issue
    0
    Expires
    Dec 24, 2013

    See this permit on One Stop

  11. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    VACANCY

    Permit
    10ELC-00844
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    A/C & Elect Contr
    Days from application to issue
    10
  12. Permit General Mechanical Meter Release - Released

    meter out over 6 months; anthony ; ck#10333.

    Permit
    08MCH-16613
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Resident Piping Spec
    Days from application to issue
    5
  13. Permit General Mechanical Application Acceptance - Approved

    INSTALL ELEC WARM AIR FURNACE. KENNETH ROBERT (#039784)

    Permit
    08MCH-16394
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Robert Refrigeration
    Days from application to issue
    5
  14. Permit General Mechanical Certificate Of Completion - Issued No Meter

    warm air furn.

    Permit
    05MCH-04717
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $55
    Contractor
    Southland A/C & Htg. Inc.
    Days from application to issue
    5
  15. Permit General Mechanical Inspection - Completed

    4-GAS LAMPS AND POOL HEATER. CORNELIUS JOHNSON (#50327)

    Permit
    05MCH-01573
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $105
    Contractor
    All Sufficient Plbg. &Construction Constractors
    Days from application to issue
    5
  16. Permit General Mechanical Inspection - Completed

    NEW GAS LINE. C.J. JOHNSON ($CASH)

    Permit
    05MCH-01552
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $15
    Contractor
    All Sufficient Plbg. &Construction Constractors
    Days from application to issue
    5
  17. Permit Electrical Service / Circuit / Feeder Inspection - Completed

    circuits for pool equipment

    Permit
    05ELC-01417
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Days from application to issue
    10
  18. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    POOL HOOK UP FIBER MESH DECK

    Permit
    05ELC-00694
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Jesco Enterprises
    Days from application to issue
    10
  19. Permit Swimming Pool Inspection - Completed

    INSTALL AN INGROUND SWIMMING POOL IN REAR OF EXISTING DOUBLE(819-21) AS PER SKETCH AND VCC PERMIT #040814.

    Permit
    04BLD-03411
    Type
    Swimming Pool
    Work
    Swimming Pool
    Estimated cost (applicant’s figure)
    $35,590
    Fees
    $345
    Days from application to issue
    5
  20. Permit Mechanical Annual Fee Pending
    Permit
    03MCH-05027
    Type
    Mechanical
    Work
    Stationary Equipment Annual
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30