Mid-City

2916 Palmyra Street is in Mid-City, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Mid-City historic district under partial HDLC control, where demolition needs HDLC review. The city has 10 permits on record here; the most recent, a mechanical fuel gas permit, was filed in January 2018. 3 are still open. On this block in the past year: 5 requests to 311 and 26 calls to police.

Zoning
HU-RD2
Historic district
Mid-City (Partial control)
National Register
Mid-City Historic District
Council district
B
Ward
3
Lot size
3,050 sq ft
Parcel
41032967

Everything on record here

10 records, newest first · 3 open

  1. Permit Mechanical Fuel Gas Permit Finaled

    Adding a gas line from meter to the kitchen stove. Nothing else has gas in the house. Need the pipes inspected so Entergy can put a gas meter in.

    Permit
    18-40627-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $800
    Fees
    $15
    Contractor
    Stefan Gaszak
    Days from application to issue
    1
    Expires
    Jul 4, 2018
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  2. Permit Mechanical HVAC Permit Finaled

    Brad Galpin-733-1324-pd mo#A 17-419923794-hvac, Waf changeout

    Permit
    16-21789-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Brad Galpin
    Days from application to issue
    0
    Expires
    Jan 1, 2017

    See this permit on One Stop

  3. Permit Construction Loop Permit Finaled

    temp pole

    Permit
    16-16501-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $100
    Fees
    $40
    Days from application to issue
    0
    Expires
    Nov 17, 2016

    See this permit on One Stop

  4. Permit Electrical Service / Circuit / Feeder Permit Finaled

    adding three new circuit to renovation

    Permit
    16-16499-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $2,000
    Fees
    $49
    Days from application to issue
    28
    Expires
    Dec 14, 2016

    See this permit on One Stop

  5. Permit Electrical Repair / Replacement / Addition Other

    Repair cut wire and wire two bedrooms and two closets

    Permit
    16-15582-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $52

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Other

    Renovate single - exterior siding repair, sheetrock patches, create bathroom on 2nd floor, basic shoring, renovate kitchen, selective interior demo, interior/exterior paint, update electrical, update HVAC.

    Permit
    16-12980-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $129,000
    Fees
    $705
    Contractor
    Par Contractors Inc
    Days from application to issue
    7
    Expires
    Oct 27, 2016

    See this permit on One Stop

  7. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    smoke detectors,relocate panel/malone,Q

    Permit
    07ELC-11544
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Malone Electrical
    Days from application to issue
    12
  8. Permit Construction Loop Application Acceptance - Approved

    RECONNECT

    Permit
    06ELC-33505
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Rodney G Roberts
    Days from application to issue
    10
  9. Permit Electrical Closed
    Permit
    04ELC-02962
    Type
    Electrical
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
  10. Permit General Mechanical Inspection - Completed

    INSTALL ODS SPACE HTG. & OUT OVER SIX MONTHS. JAMES SMITH

    Permit
    04MCH-02209
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Carrollton Plbg. & Heating
    Days from application to issue
    5