Mid-City

3000 Palmyra Street is in Mid-City, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Mid-City historic district under partial HDLC control, where demolition needs HDLC review. The city has 6 permits on record here; the most recent, an electrical repair / replacement / addition permit, was filed in June 2017. 5 are still open. On this block in the past year: 4 requests to 311 and 85 calls to police.

Zoning
HU-RD2
Historic district
Mid-City (Partial control)
National Register
Mid-City Historic District
Council district
B
Ward
3
Lot size
3,776 sq ft
Parcel
41032977

Everything on record here

6 records, newest first · 5 open

  1. Permit Electrical Repair / Replacement / Addition In Review

    ADDING ELECTRICAL NON METERED SERVICE FOR CELL SITE

    Permit
    17-22037-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $800
    Fees
    $98
    Contractor
    Lenard Brent Smith
    Days from application to issue
    7
    Expires
    Dec 30, 2017

    See this permit on One Stop

    Placed here by its map location from “2795 Palmyra St”.

  2. Permit Emergency Permit Inspection - Completed

    HURRICANE DAMAGE REPAIRS TO A TWO-FAMILY DWELLING (DOUBLE) LOCATED AT 3000-2 PALMYRA STREET.

    Permit
    08BLD-00973
    Type
    Emergency Permit
    Work
    Emergency Permit
    Estimated cost (applicant’s figure)
    $40,000
    Fees
    $250
    Days from application to issue
    5
  3. Permit General Mechanical Inspection - Completed

    RLL-DEANO-482-2940-GAS-LINE-1-WH-CK-17984

    Permit
    08MCH-02232
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Service Plbg
    Days from application to issue
    5
  4. Permit General Mechanical Inspection - Completed

    RLL-DEANO-482-2940-GAS-LINE-1-WH-CK-17985

    Permit
    08MCH-02233
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Service Plbg
    Days from application to issue
    5
  5. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-13006
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    C.J.Davis Elect Ser
    Days from application to issue
    10
  6. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    07ELC-13007
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $95
    Contractor
    C.J.Davis Elect Ser
    Days from application to issue
    10