Touro

3528 Camp Street is in Touro, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 15 permits on record here; the most recent, an HDLC COA permit, was filed in October 2026. 4 are still open. On this block in the past year: 6 requests to 311 and 2 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
12
Lot size
9,010 sq ft
Parcel
41045148

Everything on record here

17 records, newest first · 4 open

  1. Permit HDLC COA Permit Cancelled

    Mechanical fuel gas work associated with the replacement of an existing Briggs & Stratton standby generator with one new 26 kW Kohler air-cooled natural gas standby generator (Model 26RCA-QS1) at an existing single-family residence. Scope includes disconnecting the existing generator from the natural gas supply and connecting the replacement generator to the existing 1¼-inch low-pressure natural gas line. Existing gas infrastructure will be reused. All work shall comply with applicable fuel gas codes and manufacturer installation requirements. Related Permanent Generator Permit: FX1YBK.

    Permit
    26-31478-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Apr 26, 2027
    1. Permit Case Created Complete
    2. Sub-Permit not required Complete

    See this permit on One Stop

  2. Permit Mechanical Fuel Gas In Review

    Mechanical fuel gas work associated with the replacement of an existing Briggs & Stratton standby generator with one new 26 kW Kohler air-cooled natural gas standby generator (Model 26RCA-QS1) at an existing single-family residence. Scope includes disconnecting the existing generator from the natural gas supply and connecting the replacement generator to the existing 1¼-inch low-pressure natural gas line. Existing gas infrastructure will be reused. All work shall comply with applicable fuel gas codes and manufacturer installation requirements. Related Permanent Generator Permit: FX1YBK.

    Permit
    26-31478-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $16,365
    Fees
    $50
    Contractor
    Jeremiah Alexander Johnson
    1. Gas Line and Outlets Paid
    2. Mechanical Special Equipment Paid
    3. Special Equipment
    4. Rough Mech Gas Res
    5. Gas Line
    6. Application Submitted Complete
    7. Mechanical Permit Review Pending
    8. Application submitted
    9. Application Review Complete
    10. Mechanical Permit Review Complete
    11. Application review
    12. HDLC Mechanical Exterior Review not Required
    13. Permit Approved Complete
    14. Permit approved
    15. Sub-Permits Issued Complete

    See this permit on One Stop

  3. Permit Permanent Generator Permit Issued

    Replacement of an existing Briggs & Stratton standby generator and automatic transfer switch with one new 26 kW Kohler air-cooled natural gas standby generator (Model 26RCA-QS1) and 150A automatic transfer switch. Work includes removal of existing equipment, installation of the new generator on the existing concrete stand, reuse of existing electrical cabling, connection to the existing natural gas line, installation of a whole-home surge protector, sealing of applicable soffit vents, and installation of required carbon monoxide detectors. Installation shall comply with applicable codes and manufacturer requirements.

    Permit
    26-31471-EGEN
    Type
    Permanent Generator
    Work
    Permanent Generator
    Estimated cost (applicant’s figure)
    $16,365
    Fees
    $85
    Contractor
    Jeremiah Alexander Johnson
    Days from application to issue
    11
    Expires
    May 6, 2027
    1. Electrical Paid
    2. Final Electric
    3. Preliminary
    4. Application Submitted Complete
    5. Application submitted
    6. Application Review Complete
    7. Electrical Complete
    8. Application review
    9. Permit Approved Complete
    10. Zoning Complete
    11. Permit approved
    12. Permit Issued Complete
    13. Issue date

    See this permit on One Stop

  4. Permit Electrical Repair / Replacement / Addition Permit Issued

    Kitchen + Bathroom renovation.

    Permit
    19-03129-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $55
    Contractor
    Charles Thurber Pierson
    Days from application to issue
    0
    Expires
    Jul 30, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  5. Permit Dumpster/Construction Zone Other

    Dumpster on side of the house for 1 week during demolition.

    Permit
    19-00531-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $120
    Days from application to issue
    0
    Expires
    Jul 7, 2019

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Other

    Kitchen renovation, bathroom renovation, sheetrock repair, painting

    Permit
    18-41646-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $40,600
    Fees
    $325
    Contractor
    EM Improvements LLC
    Days from application to issue
    13
    Expires
    Jul 3, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date
    7. First inspection

    See this permit on One Stop

  7. Permit Electrical Service / Circuit / Feeder Permit Issued

    Adding 2 circuits for Knob and tube rewire.

    Permit
    18-37627-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $2,957
    Fees
    $46
    Contractor
    WILLIAM Floyd Schell III
    Days from application to issue
    0
    Expires
    May 13, 2019
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) Other

    Rewiring Knob and Tube up to code as per attached plans. No plumbing. No HVAC. No demolition of any walls. No exterior work allowed under this permit.

    Permit
    18-36251-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $85
    Contractor
    Bill Schell's Electric LLC
    Days from application to issue
    12
    Expires
    May 13, 2019
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Permit approved
    5. Issue date

    See this permit on One Stop

  9. Permit Lead-Based Paint Form Permit Issued

    Removal of exterior paint providing containment or using approved HEPA vacuum system.

    Permit
    17-07708-LEAD
    Type
    Lead-Based Paint Form
    Work
    Lead-Based Paint Form
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Sep 7, 2017

    See this permit on One Stop

  10. Permit Permanent Generator Permit Issued

    install 20kw generator 15-21750-ACCS

    Permit
    15-26683-EGEN
    Type
    Permanent Generator
    Work
    Permanent Generator
    Estimated cost (applicant’s figure)
    $0
    Fees
    $73
    Contractor
    Edward Leroy Dawson
    Days from application to issue
    0
    Expires
    May 4, 2016

    See this permit on One Stop

  11. Permit Mechanical Fuel Gas Permit Issued

    install gas line, generator and meter increase. Charles Singer (#31037) 15-21750-ACCS

    Permit
    15-22309-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $0
    Fees
    $80
    Contractor
    Charles Singer
    Days from application to issue
    0
    Expires
    Jan 24, 2016

    See this permit on One Stop

  12. Permit Accessory Structure Permit Issued

    Install a standby gas generator as per sketch.

    Permit
    15-21750-ACCS
    Type
    Accessory Structure
    Work
    Accessory Structure
    Estimated cost (applicant’s figure)
    $13,500
    Fees
    $130
    Contractor
    Serutine Refrigeration Service Inc
    Days from application to issue
    3
    Expires
    Jan 24, 2016

    See this permit on One Stop

  13. Permit Solar Permit Issued

    Solar panel installation on the roof

    Permit
    14-34490-SOLR
    Type
    Solar
    Work
    Solar
    Estimated cost (applicant’s figure)
    $33,000
    Fees
    $60
    Contractor
    Jeffrey David Cantin
    Days from application to issue
    2
    Expires
    May 7, 2015

    See this permit on One Stop

  14. Permit Renovation (Non-Structural) Permit Issued

    Solar panel installation on the roof

    Permit
    14-34170-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $33,000
    Fees
    $225
    Contractor
    SOLAR ALTERNATIVES INC
    Days from application to issue
    1
    Expires
    May 5, 2015

    See this permit on One Stop

  15. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING INSTALL 5 & 3-TON A\C SYSTEM AND 2-GAS WARM AIR FURNACE. GLENN BOURGEOIS - 367-5455

    Permit
    M01007463
    Type
    Mechanical
    Days from application to issue
    1
  16. City record Permanent Generator

    Installation of one 26 kW Kohler air-cooled natural gas standby generator (Model 26RCA-QS1) on an existing 6-inch concrete stand at a single-family residence. Scope includes installation and connection of a 150A service-rated automatic transfer switch (Model RXT-JFNC-150ASEQS3), connection to existing electrical service and natural gas piping, and associated electrical and gas work. Generator placement and installation will follow the submitted site plan, applicable codes, and manufacturer requirements.

    1. Zoning review Pending
    2. Electrical review Pending

    See this record on One Stop · checked Nov 18, 2026

  17. City record Mechanical Fuel Gas

    Test Test

    1. Mechanical Permit Review review Pending
    2. Mechanical Permit Review review Pending

    See this record on One Stop · checked Nov 22, 2026