East Riverside
3716 Annunciation Street is in East Riverside, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 11 permits on record here; the most recent, a mechanical HVAC permit, was filed in October 2022. 5 are still open. On this block in the past year: 5 requests to 311 and 5 calls to police.
- Zoning
- HU-RD2
- Historic district
- Uptown (Partial control)
- National Register
- Uptown New Orleans Historic District
- Council district
- B
- Ward
- 12
- Lot size
- 2,149 sq ft
- Parcel
- 41048130
Everything on record here
11 records, newest first · 5 open
-
Permit Mechanical HVAC Permit Finaled
correct deficiencies of original installation 2 3 tons Rheem electric system.
- Permit
- 22-32384-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $525
- Fees
- $600
- Days from application to issue
- 7
- Expires
- May 2, 2023
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical Fuel Gas Permit Finaled
Gas out over six months. Install gas water heater.
- Permit
- 22-06199-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $850
- Fees
- $50
- Days from application to issue
- 8
- Expires
- Sep 8, 2022
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical HVAC Permit Cancelled
install 2 3 ton system goodman gas
- Permit
- 21-31255-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $9,625
- Fees
- $110
- Application submitted
-
Permit Mechanical Fuel Gas Other
6 month gas test and install 30 gallon water heater gas
- Permit
- 21-31254-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $9,625
- Fees
- $55
- Application submitted
- Application review
- Permit approved
-
Permit Electrical Service / Circuit / Feeder Permit Issued
rewire, 150 amp panel, meter pan, 15 circuits
- Permit
- 20-41985-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $8,200
- Fees
- $130
- Contractor
- Perry Joseph Becnel
- Days from application to issue
- 5
- Expires
- Apr 5, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Renovation (Structural) Occupancy
Interior renovation- per plans, Camelback addition per plans, replace siding and roof, replace sheetrock, install stairs to new 2nd floor, install new bathroom with fixtures, install new wiring with fixtures, outlets and switches. install new front porch. All work scope per plans-
- Permit
- 19-33927-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $136,000
- Fees
- $876
- Contractor
- city wide construction
- Days from application to issue
- 22
- Expires
- May 14, 2020
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Permit Issuance Active
VACANCY
- Permit
- 11ELC-10836
- Type
- Electrical
- Work
- Repair-Replacement-Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 08ELC-10658
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $126
- Contractor
- T.Harris Elec. LLC.
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
increase
- Permit
- 05ELC-04233
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $75
- Contractor
- Chris Ray Elec. Service
- Days from application to issue
- 10
-
Permit Construction Loop Application Acceptance - Approved
temp pole
- Permit
- 05ELC-04236
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
- Contractor
- Chris Ray Elec. Service
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
increase
- Permit
- 05ELC-04237
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $75
- Contractor
- Chris Ray Elec. Service
- Days from application to issue
- 10