West Riverside
5710 Patton Street is in West Riverside, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 10 permits on record here; the most recent, a renovation (structural) permit, was filed in February 2019. 4 are still open. A demolition permit was filed in August 2016.
- Zoning
- HU-RD2
- Historic district
- Uptown (Partial control)
- National Register
- Uptown New Orleans Historic District
- Council district
- A
- Ward
- 14
- Lot size
- 2,838 sq ft
- Parcel
- 41050017
Everything on record here
10 records, newest first · 4 open
-
Permit Renovation (Structural) Permit Issued
Jacking & Shoring (No Leveling Adjustments), Install CMU Concrete Block Piers (7), Install CMU Block Pier onto Existing Continous Footing (1), Install Pressure Treated Support Beam (14 LF), Sister Pressure Treated Floor Joists (13), Install Joists Hangers on (11) Floor Joists (Front Right Elevation).
- Permit
- 19-06354-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $11,490
- Fees
- $180
- Contractor
- Al Sanchez Construction LLC
- Days from application to issue
- 8
- Expires
- Sep 6, 2019
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical Fuel Gas Permit Finaled
new gasline and gas w/heater/vernon 415-3566/ck#5388.
- Permit
- 17-34866-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Vernon Marcotte
- Days from application to issue
- 0
- Expires
- Apr 11, 2018
-
Permit Electrical Service / Circuit / Feeder Permit Issued
REWIRE RESIDENCE 16-14353-RNVS CHANGE FROM 5712 TO 5710 PATTON ST
- Permit
- 17-19248-SERV
- Type
- Electrical Service / Circuit / Feeder
- Work
- Electrical Service / Circuit / Feeder
- Estimated cost (applicant’s figure)
- $0
- Fees
- $245
- Contractor
- Alex James Ruiz III
- Days from application to issue
- 0
- Expires
- Dec 1, 2017
-
Permit Mechanical HVAC Permit Finaled
install gas air handler and a/c. Roosevelt Nunnery (#1224) 16-14353-Rnvs
- Permit
- 16-41902-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $0
- Fees
- $68
- Contractor
- Nunnery Roosevelt
- Days from application to issue
- 0
- Expires
- Jun 27, 2017
-
Permit Construction Loop Permit Finaled
TEMP POLE 16-02824-RNVN
- Permit
- 16-34826-LOOP
- Type
- Construction Loop
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $40
- Contractor
- Todd Alexander Dolce
- Days from application to issue
- 0
- Expires
- Apr 19, 2017
-
Permit Demolition Permit Issued
NCDAC May 16, 2016 - Demolish more than 25% of the floor are and alter the front facade as per plans and NCDAC approval.
- Permit
- 16-14829-DEMO
- Type
- Demolition
- Work
- Demolition
- Estimated cost (applicant’s figure)
- $115,000
- Fees
- $445
- Contractor
- B & G Construction
- Days from application to issue
- 107
- Expires
- Feb 19, 2017
-
Permit Renovation (Structural) Occupancy
Construct second floor addition and renovate single-family dwelling as per plans.
- Permit
- 16-14353-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $115,000
- Fees
- $750
- Contractor
- B & G Construction, John Dalton
- Days from application to issue
- 130
- Expires
- Mar 9, 2017
-
Permit Renovation (Non-Structural) Occupancy
Minimal scope of work at present: demolition of some interior, repairs to porch. Any further work requires additional permit.
- Permit
- 16-02824-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $5,000
- Fees
- $85
- Contractor
- B & G Construction
- Days from application to issue
- 1
- Expires
- Jul 29, 2016
-
Permit Electrical Application Approved
- Permit
- 04ELC-01873
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $60
-
Permit Electrical Application Approved
- Permit
- 04ELC-01874
- Type
- Electrical
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $60