Audubon

3 Everett Place is in Audubon, zoned HU-RS (Older neighborhoods, single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 9 permits on record here; the most recent, an HDLC COA permit, was filed in November 2026. 8 are still open. On this block in the past year: 4 requests to 311 and 0 calls to police.

Zoning
HU-RS
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
A
Ward
14
Lot size
9,423 sq ft
Parcel
41050634

Everything on record here

11 records, newest first · 9 open

  1. Permit HDLC COA Permit Cancelled

    To supply and install new TPO internal gutter system with heat welded seams. To supply and install all necessary jacks and lead plumbing stacks. To fabricate and install all necessary copper metal valleys. To fabricate and install all necessary copper step flashings. To fabricate and install all necessary apron flashing. To fabricate and install all necessary counter flashing. To fabricate and install all necessary chimney flashing. To fabricate and install new copper flashing for hatch. To supply and install all necessary drip edge. To nail drip edge at the eave and rake every 4" with staggered nail pattern. To install new LIMITED LIFETIME DIMENSIONAL shingle roof. To supply and install V-Tile on hip and ridge and set in mortar.

    Permit
    26-34073-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    May 18, 2027

    See this permit on One Stop

  2. Permit Residential Re-Roofing In Review

    To supply and install new TPO internal gutter system with heat welded seams. To supply and install all necessary jacks and lead plumbing stacks. To fabricate and install all necessary copper metal valleys. To fabricate and install all necessary copper step flashings. To fabricate and install all necessary apron flashing. To fabricate and install all necessary counter flashing. To fabricate and install all necessary chimney flashing. To fabricate and install new copper flashing for hatch. To supply and install all necessary drip edge. To nail drip edge at the eave and rake every 4" with staggered nail pattern. To install new LIMITED LIFETIME DIMENSIONAL shingle roof. To supply and install V-Tile on hip and ridge and set in mortar. PLEASE NOTE: Re-roofing permits DO NOT require an inspection from Safety and Permits, instead please upload the following photos to this permit PHOTOS REQUIRED 4 geotagged photos (one from each side) showing: Removal of existing roof material Installation of water intrusion resistant underlayment Installation of the drip-edge and flashing Installation of shingles or metal panels  Once all applicable photos have been uploaded to the permit, please email requesting permit closure. http://onestopapp.nola.gov/

    Permit
    26-34073-ROOF
    Type
    Residential Re-Roofing
    Work
    Residential Re-Roofing
    Estimated cost (applicant’s figure)
    $71,000
    Fees
    $90
    Contractor
    GUARANTY SHEET METAL WORKS INC
    1. Application submitted
    2. Application review
    3. Permit approved

    See this permit on One Stop

  3. City record Residential Re-Roofing Application Submitted

    To supply and install new TPO internal gutter system with heat welded seams. To supply and install all necessary jacks and lead plumbing stacks. To fabricate and install all necessary copper metal valleys. To fabricate and install all necessary copper step flashings. To fabricate and install all necessary apron flashing. To fabricate and install all necessary counter flashing. To fabricate and install all necessary chimney flashing. To fabricate and install new copper flashing for hatch. To supply and install all necessary drip edge. To nail drip edge at the eave and rake every 4" with staggered nail pattern. To install new LIMITED LIFETIME DIMENSIONAL shingle roof. To supply and install V-Tile on hip and ridge and set in mortar.

    1. Application Submitted
    2. Permit Intake review Pending

    See this record on One Stop · checked Nov 18, 2026

  4. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    SOLAR PANEL

    Permit
    09ELC-01765
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Contractor
    South Coast Solar
    Days from application to issue
    10
  5. Permit Building

    BUILDING ADDITION (LESS THAN 50% NEW) SINGLE-FAMILY DWELLING ADDITION OF DETACHED GARAGE TO SINGLE FAMILY DEWLLING AS PER SKETCH.

    Permit
    B01002641
    Type
    Building
    Days from application to issue
    0
  6. Permit Building

    SWIMMING POOL SINGLE-FAMILY DWELLING REMOVE EXISTING POOL AND CONSTRUCT A NEW IN-GROUND SWIMMING POOL IN REAR OF EXIST SINGLE AS PER SKETCH & THE N O COMP ZON ORD ART. 15 SEC 151.5.12 #7.

    Permit
    B01002240
    Type
    Building
    Days from application to issue
    0
  7. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING INSTALL GAS LINE AND THREE GAS WATER HEATER. LEON MOLINARIO 780-2600

    Permit
    M01001290
    Type
    Mechanical
    Days from application to issue
    0
  8. Permit Electrical

    ELECTRICAL REWIRING SINGLE-FAMILY DWELLING REWIRE

    Permit
    E01001574
    Type
    Electrical
    Days from application to issue
    0
  9. Permit Building

    BUILDING ADDITION (LESS THAN 50% NEW) SINGLE-FAMILY DWELLING ADDITION OF 225 S.F. OF COVERED PORCH FRONT RIGHT SIDE, 1ST LEVEL ONLY AS PER SKETCH.

    Permit
    B01000849
    Type
    Building
    Days from application to issue
    0
  10. Permit Mechanical

    INSTALL MECHANICAL EQUIPMENT SINGLE-FAMILY DWELLING INSTALL SIX A\C UNITS AND SIX GAS WARM AIR FURNACE. SEPTIME ROME - 465-0688

    Permit
    M01000451
    Type
    Mechanical
    Days from application to issue
    0
  11. HDLC review HDLC COA

    To supply and install new TPO internal gutter system with heat welded seams. To supply and install all necessary jacks and lead plumbing stacks. To fabricate and install all necessary copper metal valleys. To fabricate and install all necessary copper step flashings. To fabricate and install all necessary apron flashing. To fabricate and install all necessary counter flashing. To fabricate and install all necessary chimney flashing. To fabricate and install new copper flashing for hatch. To supply and install all necessary drip edge. To nail drip edge at the eave and rake every 4" with staggered nail pattern. To install new LIMITED LIFETIME DIMENSIONAL shingle roof. To supply and install V-Tile on hip and ridge and set in mortar.

    See this record on One Stop · checked Nov 18, 2026