Milan

2523 General Pershing Street is in Milan, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 6 permits on record here; the most recent, a renovation (structural) permit, was filed in October 2013. 6 are still open. On this block in the past year: 17 requests to 311 and 6 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
12
Lot size
4,807 sq ft
Parcel
41051314

Everything on record here

6 records, newest first · 6 open

  1. Permit Renovation (Structural) Permit Issued

    Re-align the left rear area, encapsulate interior of front porch wall, breakdown pier located at the rear left corner & build (1) one pier atop existing foundation, install (22') twenty-two feet of new bounce sill down the rear left center area of property, install (5) five new footings and piers under newly installed sill down the rear left center area of residence

    Permit
    13-42341-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $10,875
    Fees
    $115
    Contractor
    Roubion Construction LLC
    Days from application to issue
    3
    Expires
    Apr 30, 2014

    See this permit on One Stop

  2. Permit General Mechanical Inspection - Completed

    INSTALL GAS LINE AND GAS W\H. SAMUEL TILLMAN (#3678)

    Permit
    08MCH-12311
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $35
    Contractor
    Tillman Electric/Refregeration
    Days from application to issue
    5
  3. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-04162
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $132
    Contractor
    Wilson Electric
    Days from application to issue
    10
  4. Permit Construction Loop Application Acceptance - Approved

    TEMP POLE

    Permit
    07ELC-30627
    Type
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    J. Carr's Elec.Llc
  5. Permit General Mechanical Meter Release - Released

    INSTALL ELEC WAF AND 3-TON CONDENSER. ZACK MOUTON (#32381)

    Permit
    06MCH-06214
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $62
    Contractor
    Bryan's United A/C & Heat
    Days from application to issue
    5
  6. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    RECONNECT

    Permit
    06ELC-28404
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    J. Carr's Elec.Llc
    Days from application to issue
    10