Milan
1900 Marengo Street is in Milan, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 9 permits on record here; the most recent, a street cut permit, was filed in September 2025. 2 are still open. On this block in the past year: 11 requests to 311 and 6 calls to police.
- Zoning
- HU-RD2
- Historic district
- Uptown (Partial control)
- National Register
- Uptown New Orleans Historic District
- Council district
- B
- Ward
- 12
- Lot size
- 5,524 sq ft
- Parcel
- 41052388
Everything on record here
9 records, newest first · 2 open
-
Permit Street Cut Permit Issued
Directional bore to place fiber optic communication cable in 1-2" conduit starting on the west side of Marengo Street at existing handhole, continuing north to proposed handhole then continuing west on the south side of Danneel Street and stopping at proposed handhole
- Permit
- 25-26927-RSTC
- Type
- Street Cut
- Work
- Street Cut
- Estimated cost (applicant’s figure)
- $0
- Fees
- $328
- Contractor
- ADB Companies
- Days from application to issue
- 14
- Expires
- Mar 18, 2026
-
Permit Mechanical HVAC Permit Finaled
Remove current unit and replace with a 4-ton 19 Seer Inverter Tempstar Brand condenser, 80k btu gas furnace, multi-position coil, special thermostat, and surge protector. We will reuse existing ductwork. final inspection done 8/14/24 permit #21-02439-HVAC
- Permit
- 24-26742-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $10,089
- Fees
- $73
- Contractor
- Charles Anthony Blanque
- Days from application to issue
- 3
- Expires
- Feb 28, 2025
- First inspection
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical HVAC Permit Finaled
Remove current unit and replace with a 4-ton 19 Seer Inverter Tempstar Brand condenser, 80k btu gas furnace, multi-position coil, special thermostat, and surge protector. We will reuse existing ductwork. Final inspection done 8/14/24 permit #21-02438-HVAC
- Permit
- 24-26738-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $10,089
- Fees
- $73
- Contractor
- Charles Anthony Blanque
- Days from application to issue
- 3
- Expires
- Feb 28, 2025
- First inspection
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical Fuel Gas Permit Finaled
Run gas line for a tankless water heater and furnace. The rough ins were inspected and approved by CNO. Final inspection done 8/14/204 permit # 21-02436-FGAS
- Permit
- 24-26688-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $1,500
- Fees
- $82
- Contractor
- Charles Anthony Blanque
- Days from application to issue
- 3
- Expires
- Feb 28, 2025
- First inspection
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical Fuel Gas Permit Finaled
Single family per address - New gas line- Gas line pressure in place secure all penetrations complete. All rough ins complete, inspected, and passed on 7.25.22 per prior permit. This final was inspected on 8.14.24 Remarks: New Gas Line for stove - WAF & Tankless W/H Complete w/ Pressure Relief Valve & discharge line - Gas Line Pressure tesr - Holding - OK to Release Meter - Meter Increase - 350,000 BTU's
- Permit
- 24-26675-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $3,500
- Fees
- $82
- Contractor
- Charles Anthony Blanque
- Days from application to issue
- 9
- Expires
- Mar 6, 2025
- First inspection
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical HVAC Permit Cancelled
Remove current unit and replace with a 4-ton 19 Seer Inverter Tempstar Brand condenser, 80k btu gas furnace, multi-position coil, special thermostat, and surge protector. We will reuse existing ductwork.
- Permit
- 21-02439-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $10,089
- Fees
- $73
- Contractor
- J C Services AC, LLC
- Days from application to issue
- 1
- Expires
- Jul 27, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical HVAC Permit Cancelled
Remove current unit and replace with a 4-ton 19 Seer Inverter Tempstar Brand condenser, 80k btu gas furnace, multi-position coil, special thermostat, and surge protector. We will reuse existing ductwork.
- Permit
- 21-02438-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $10,089
- Fees
- $73
- Contractor
- J C Services AC, LLC
- Days from application to issue
- 1
- Expires
- Jul 27, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical Fuel Gas Permit Cancelled
run gas line for tankless water heater and furnace, total of 300k btu, meter increase
- Permit
- 21-02436-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $1,500
- Fees
- $82
- Contractor
- J C Services AC, LLC
- Days from application to issue
- 1
- Expires
- Jul 27, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
-
Permit Mechanical Fuel Gas Permit Issued
run gas line for tankless water heater, stove and furnace, total of 400k btu, meter increase
- Permit
- 21-02422-FGAS
- Type
- Mechanical Fuel Gas
- Work
- Mechanical Fuel Gas
- Estimated cost (applicant’s figure)
- $3,500
- Fees
- $82
- Contractor
- J C Services AC, LLC
- Days from application to issue
- 1
- Expires
- Jul 27, 2021
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection