Milan

2923 General Taylor Street is in Milan, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 8 permits on record here; the most recent, a plumbing permit, was filed in May 2026. 7 are still open. There were 2 past code enforcement cases, the latest in April 2009, all closed. On this block in the past year: 8 requests to 311 and 19 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
12
Lot size
2,533 sq ft
Parcel
41053101

Everything on record here

10 records, newest first · 7 open

  1. Permit Plumbing Permit Other

    concrete chipping, trenching, and piping to make repairs on the 6" city wye and transition under raised home to eliminate 6" wye and riser under home and move it to exterior sidewalk in front of property. Install 4" PVC under raised home to connect to existing sewer under raised home. Install new 6" wye and cleanout riser on exterior at front of home to allow city to have access to the 6" terracotta under sidewalk area. Repairs will be made with pvc and connect to existing 6" city terracotta under sidewalk where good piping is located. no new fixtures

    Permit
    26-15246-PLMB
    Type
    Plumbing Permit
    Work
    Plumbing Permit
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Steven Bertucci Jr
    Days from application to issue
    1
    Expires
    Nov 21, 2026

    See this permit on One Stop

  2. Permit General Mechanical Application Acceptance - Approved

    REPLACE 3-TON CONDENSER UNIT. DANIEL DECAREAUX (#2968)

    Permit
    09MCH-09224
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $42
    Contractor
    Alliance A/C & Heating Inc
    Days from application to issue
    5
  3. Permit Mechanical Meter Released

    rll-d-dawson-666-0697-gas-line-reconnect-1-wh-ck-14390

    Permit
    09MCH-08989
    Type
    Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
  4. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    VACANCY

    Permit
    09ELC-10781
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Stan Gorman Services
    Days from application to issue
    10
  5. Code enforcement Case ENVHADJ-2000363SN Closed

    The property was inspected on 11/23/1999 with a finding of "Complete". The file was subsequently closed.

    1. Inspection: Inspection Complete

    The city links this case to permit 26-15246-PLMB.

  6. Code enforcement Case ENVHADJ-952616 Closed

    A hearing was held on 04/10/2009 with a result of "Found Guilty". The case was subsequently closed.

    1. Inspection: Inspection Complete
    2. Hearing: Initial Hearing Found Guilty
  7. Permit General Mechanical Inspection - Completed

    rll-d-dawson-666-0697-gas-line-1-wh-reconnect-ck-13981

    Permit
    08MCH-15999
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Built-In Appliance
    Days from application to issue
    5
  8. Permit General Mechanical Inspection - Completed

    install gas waf and 3-ton condenser. daniel decareaux (#2533)

    Permit
    08MCH-14526
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $67
    Contractor
    Alliance A/C & Heating Inc
    Days from application to issue
    5
  9. Permit Electrical Permit Issuance Active

    REWIRE

    Permit
    08ELC-01145
    Type
    Electrical
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $74
  10. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-01146
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $74
    Contractor
    Herman L. Mcclain Jr.
    Days from application to issue
    10