Milan
2780 Marengo Street is in Milan, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 7 permits on record here; the most recent, a general mechanical permit, was filed in June 2009. 7 are still open. There was 1 past code enforcement case, the latest in April 2009, all closed. On this block in the past year: 8 requests to 311 and 9 calls to police.
- Zoning
- HU-RD2
- Historic district
- Uptown (Partial control)
- National Register
- Uptown New Orleans Historic District
- Council district
- B
- Ward
- 12
- Lot size
- 3,608 sq ft
- Parcel
- 41053109
Everything on record here
8 records, newest first · 7 open
-
Permit General Mechanical Inspection - Completed
rll-c-magee-915-0191-reconnect-1-wh-2-ods-heaters-ck-1055
- Permit
- 09MCH-05421
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- Megee & Sons Plbg.
- Days from application to issue
- 5
-
Code enforcement Case ENVHADJ-2004446SN Closed
A hearing was held on 05/12/2012 but the result of the hearing is still pending.
- Inspection: Inspection Complete
- Hearing: Initial Hearing Result Pending
The city links this case to permit 09MCH-05421.
-
Permit General Mechanical Inspection - Completed
rll-k-tillery-782-8376-reconnect-1-wh-ck-1254
- Permit
- 08MCH-18207
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $50
- Contractor
- Tillery Ref./Ac & Htg.
- Days from application to issue
- 5
-
Permit General Mechanical Inspection - Completed
INSTALL 2-TON A\C AND ELEC WAF. JACK BELL (#2167)
- Permit
- 08MCH-17818
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $62
- Contractor
- Efficiency Htg & A/C
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-34952
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $72
- Contractor
- Jared L. Dansby
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 07ELC-34953
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $102
- Contractor
- Jared L. Dansby
- Days from application to issue
- 10
-
Permit Residential APPROVAL
Katrina Interior Repairs
- Permit
- ACCELA-40882
- Type
- Residential
- Work
- Repair
- Estimated cost (applicant’s figure)
- $18,000
-
Permit General Mechanical Inspection - Completed
out over 6 months; install new gas line; one gas waterheater and two ods spaceheaters.lyall .
- Permit
- 04MCH-00858
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $105
- Contractor
- Ball's Plumbing LLC
- Days from application to issue
- 5