Uptown

1520 Dufossat Street is in Uptown, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 7 permits on record here; the most recent, a renovation (structural or non-structural) permit, was filed in November 2026. 6 are still open. On this block in the past year: 8 requests to 311 and 1 call to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
13
Lot size
7,073 sq ft
Parcel
41054746

Everything on record here

7 records, newest first · 6 open

  1. Permit Renovation (Structural or Non-structural) In Review

    KITCHEN RENOVATION OF A TWO-STORY, FOUR BEDROOM, FOUR AND A HALF BATH SINGLE-FAMILY RESIDENCE. SCOPE OF WORK INCLUDES BUT IS NOT LIMITED TO: BUILDING ENCLOSURE, STRUCTURAL, MECHANICAL, PLUMBING, ELECTRICAL, AND INTERIOR FINISHES.

    Permit
    26-32289-RENO
    Type
    Renovation (Structural or Non-structural)
    Work
    Renovation (Structural or Non-structural)
    Estimated cost (applicant’s figure)
    $0
    Fees
    $180
    Contractor
    Entablature LLC
    1. Building Unpaid
    2. Building Plan Review Unpaid
    3. Application Submitted Complete
    4. Permit Intake Pending
    5. Parks and Parkways Tree Review Pending
    6. Plan Review Pending
    7. Application submitted
    8. Zoning Review Complete
    9. Zoning Complete
    10. Zoning review

    See this permit on One Stop

  2. Permit Dumpster/Construction Zone Application Accepted

    DUMPSTER

    Permit
    25-26787-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Sunlight Contractors, LLC

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) Permit Issued

    1- Heavily spray Mold Stat an EPA certified mold killer 3-5 separate times over all wood members, floors, and equipment in the attic before starting any work, due to finding Stachybotrys in your mold report. Use negative pressure HEPA systems to exhaust air out of attic while working. 2- While removing the floorboards on the attic floors we will spray mold stat again and soak the old dirty insulation with a wetting agent, so the mold spores will be contained and will be less likely to go airborne. 3- Once the insulation is vacuumed with an enclosed 300- foot suction hose into our box truck with a 27 Hp Honda vacuum we will spray with Mold Stat again heavily over the entire attic. 4- Spray JO Max and RMR a certified EPA disinfectant and scrub with deck brushes. 5- For extra precaution once everything is cleaned, we will spray heavily Shockwave an EPA registered microbial disinfectant MFG by Fiberlock Technologies on all wood members in both attics, laundry room and shed in addition to Mold Stat. 6- Install separate independent electrical circuits with breakers in the panel to accommodate the negative pressure, HEPA filtration systems while mold remediation is taking place. 7- Bring in Rental, 3 commercial dehumidifiers, 5-HEPA air filtration systems, 2-HEPA vacuums, 3- Negative air pressure machines to exhaust all the contaminated air from the home during the entire process while we are working. (Set up & break down)

    Permit
    25-26594-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $88,000
    Fees
    $588
    Contractor
    Sunlight Contractors, LLC
    Days from application to issue
    55
    Expires
    Apr 27, 2026
    1. Application submitted
    2. Application review
    3. Plan review
    4. Permit approved
    5. Zoning review
    6. Issue date

    See this permit on One Stop

  4. Permit Mechanical Fuel Gas Other

    Run gas line through basement. Dig trench in yard. Run gas line in trench to generator location.

    Permit
    25-22289-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $3,000
    Fees
    $50
    Days from application to issue
    14
    Expires
    Feb 5, 2026
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  5. Permit Accessory Structure Permit Issued

    Installing a 36KW 120/240 Volt Single Phase Natural Gas Generator.

    Permit
    25-11388-ACCS
    Type
    Accessory Structure
    Work
    Accessory Structure
    Estimated cost (applicant’s figure)
    $27,564
    Fees
    $260
    Contractor
    Buddy Michael Cambas
    Days from application to issue
    44
    Expires
    Nov 28, 2025
    1. Application submitted
    2. Application review
    3. Plan review
    4. Zoning review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  6. Permit Permanent Generator Permit Issued

    Installing a 36KW 120/240 Volt Single Phase Natural Gas Generator

    Permit
    25-11076-EGEN
    Type
    Permanent Generator
    Work
    Permanent Generator
    Estimated cost (applicant’s figure)
    $27,564
    Fees
    $103
    Contractor
    Buddy Michael Cambas
    Days from application to issue
    113
    Expires
    Jan 31, 2026
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  7. Permit Electrical

    INCREASE OF SERVICE SINGLE-FAMILY DWELLING ROYAL BENERIX

    Permit
    E02004193
    Type
    Electrical
    Days from application to issue
    0