Marlyville - Fontainebleau

3333 State Street Drive is in Marlyville - Fontainebleau, zoned HU-RD1 (Older neighborhoods, two-family homes on smaller lots). It is in the Carrollton historic district under partial HDLC control, where demolition needs HDLC review. The city has 5 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in February 2026. 3 are still open. On this block in the past year: 27 requests to 311 and 5 calls to police.

Zoning
HU-RD1
Historic district
Carrollton (Partial control)
National Register
Carrollton Historic District
Council district
B
Ward
14
Lot size
4,612 sq ft
Parcel
41056118

Everything on record here

5 records, newest first · 3 open

  1. Permit Electrical Service / Circuit / Feeder Other

    -total of 56 devices re wired in all . -remove and dispose of all cloth wiring and knob and tube that is accessible. -about 30% of basement has knob and tube wiring. -remove dispose and replace with new romex wiring. -trace wires to location in basement. -install a new riser, meter pan & 200 amp disconnect on side of house to bring service up to code & have a means of turning the power off to basement panel. -Install a new 200-amp subpanel in the basement with all new breakers. -Install a whole home surge protector. -Install a 2nd ground rod & ground bridge & update grounding on the service. -run conduit to front porch light as to it is strictly Mc wiring on exterior of home. -add 7 new outlets to desired location of homeowner ,those 7 outlets are already included in the 56 total devices. -File permit & get inspections -Add smoke detectors & combo detectors where needed *Note We will not be responsible for any sheetrock repairs that maybe needed. This quote is not to completely rewire but to remove knob & Tube wiring where exposed.

    Permit
    26-03520-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $13,693
    Fees
    $121
    Contractor
    Joshua Elliot Brockhaus Sr
    Days from application to issue
    0
    Expires
    Aug 4, 2026
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date
    5. First inspection

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder In Review

    -total of 56 devices re wired in all . -remove and dispose of all cloth wiring and knob and tube that is accessible. -about 30% of basement has knob and tube wiring. -remove dispose and replace with new romex wiring. -trace wires to location in basement. -install a new riser, meter pan & 200 amp disconnect on side of house to bring service up to code & have a means of turning the power off to basement panel. -Install a new 200-amp subpanel in the basement with all new breakers. -Install a whole home surge protector. -Install a 2nd ground rod & ground bridge & update grounding on the service. -run conduit to front porch light as to it is strictly Mc wiring on exterior of home. -add 7 new outlets to desired location of homeowner ,those 7 outlets are already included in the 56 total devices. -File permit & get inspections -Add smoke detectors & combo detectors where needed *Note We will not be responsible for any sheetrock repairs that maybe needed. This quote is not to completely rewire but to remove knob & Tube wiring where exposed.

    Permit
    26-02756-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $13,693
    Fees
    $121
    Contractor
    BROCKHAUS ELECTRICAL & AIR CONDITIONING LLC
    1. Application submitted
    2. Application review

    See this permit on One Stop

  3. Permit Residential Permit Issuance Active

    Remove slate shingled roof-install .5" exterior plywood sheathing and install architectural style tar shingle roof. Replace wall board in 20X30' basement room-install carpet flooring

    Permit
    05CIT-03730
    Type
    Residential
    Work
    Homeowner Repair
    Estimated cost (applicant’s figure)
    $25,000
    Fees
    $175
  4. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    reconnect

    Permit
    05ELC-10265
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Days from application to issue
    10
  5. Permit Repair Application Acceptance - Approved No Review

    Repairs to an existing 1-sty single family dwelling to inc: House leveling.

    Permit
    04BLD-00321
    Type
    Repair
    Work
    Repair
    Estimated cost (applicant’s figure)
    $3,800
    Fees
    $70
    Days from application to issue
    5