Uptown

1727 Robert Street is in Uptown, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 9 permits on record here; the most recent, a driveway/ curb cut and restoration permit, was filed in April 2023. 4 are still open. On this block in the past year: 8 requests to 311 and 2 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
13
Lot size
6,771 sq ft
Parcel
41056971

Everything on record here

9 records, newest first · 4 open

  1. Permit Driveway/ Curb Cut and Restoration Other

    Our driveway width is on the property is currently 11.6. Fro property to street, while the apron has already been installed, it is bricked at 8 ft wide and needs an additional 3.6 feet of concrete to finish. Per ordinance 22.11.A.1. This permit application is not for a new curb cut out - we already have the curb cut out. This is for placing concrete on the grass area of our driveway. The measurements below will detail this.

    Permit
    23-09206-RDRV
    Type
    Driveway/ Curb Cut and Restoration
    Work
    Driveway/ Curb Cut and Restoration
    Estimated cost (applicant’s figure)
    $0
    Fees
    $100
    Contractor
    Marianne Mumford

    See this permit on One Stop

  2. Permit Mechanical Fuel Gas Application Accepted

    Gas service to pool heater plus increase meter to a 2lb system

    Permit
    21-16345-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $1,750
    Fees
    $70
    1. Application submitted

    See this permit on One Stop

  3. Permit Mechanical HVAC Permit Finaled

    Install 2 ac and heating systems. Gas furnaces. 3 tons each.

    Permit
    17-26283-HVAC
    Type
    Mechanical HVAC
    Work
    Mechanical HVAC
    Estimated cost (applicant’s figure)
    $7,000
    Fees
    $100
    Days from application to issue
    1
    Expires
    Jan 31, 2018

    See this permit on One Stop

  4. Permit Electrical Service / Circuit / Feeder Permit Issued

    Rewiring single family dwelling

    Permit
    17-26280-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $172
    Days from application to issue
    1
    Expires
    Jan 31, 2018

    See this permit on One Stop

  5. Permit Mechanical Fuel Gas Permit Finaled

    New gas tankless water heater and gas line.

    Permit
    17-26275-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $4,000
    Fees
    $40
    Days from application to issue
    1
    Expires
    Jan 31, 2018

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Occupancy

    Converting a multi-family dwelling into a single as per plans.

    Permit
    17-21270-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $107,577
    Fees
    $600
    Contractor
    Jose Villeda
    Days from application to issue
    10
    Expires
    Dec 26, 2017

    See this permit on One Stop

  7. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    REWIRE- FISHED WIRES THRU WALLS

    Permit
    10ELC-08076
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $106
    Contractor
    Dawson Electric
    Days from application to issue
    0
  8. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    REWIRE- WIRES FISHED THRU WALLS

    Permit
    10ELC-08077
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $106
    Contractor
    Dawson Electric
    Days from application to issue
    0
  9. Permit Electrical Service / Circuit / Feeder Permit Issuance - Active

    REWIRE- WIRES FISHED THRU WALLS

    Permit
    10ELC-08078
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $106
    Contractor
    Dawson Electric
    Days from application to issue
    0