Uptown

4801 Danneel Street is in Uptown, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Uptown historic district under partial HDLC control, where demolition needs HDLC review. The city has 11 permits on record here; the most recent, a residential re-roofing permit, was filed in August 2026. 8 are still open. There was 1 past code enforcement case, the latest in October 2015, all closed. On this block in the past year: 1 request to 311 and 0 calls to police.

Zoning
HU-RD2
Historic district
Uptown (Partial control)
National Register
Uptown New Orleans Historic District
Council district
B
Ward
13
Lot size
4,285 sq ft
Parcel
41057726

Everything on record here

13 records, newest first · 8 open

  1. Permit Residential Re-Roofing Permit Issued

    Remove Old architectural shingle - Remove old underlayment -Re Nail all plywood with 3 inch framing nails - Install 10 Rolls of ice and water shield - Refurnish and Install new drip edge all around the perimeter of the home - Install 19sq of architectural shingles including 1sq of ridge and 1sq of starter. Installed shingles with 1 1/4 in nails - Refurbish and install 1 new turbine - Install new wall flashing if needed - Add New roof Jacks on roof - Haul away trash and debris Once all applicable photos have been uploaded, please email requesting permit closure. PHOTOS REQUIRED 4 geotagged photos (one from each side) showing: Removal of existing roof material Installation of water intrusion resistant underlayment Installation of the drip-edge and flashing Installation of shingles or metal panels

    Permit
    26-23382-ROOF
    Type
    Residential Re-Roofing
    Work
    Residential Re-Roofing
    Estimated cost (applicant’s figure)
    $0
    Fees
    $60
    Contractor
    Roofing Masters of Louisiana LLC
    Days from application to issue
    8
    Expires
    Feb 18, 2027
    1. Building - ReRoofing Paid
    2. Removal of Existing Roofing Material
    3. Installation of water Intrusion Resistant Underlay
    4. Installation of Drip-edge and Flashing
    5. Installation of Shingles or Metal Panels
    6. Application Submitted Complete
    7. Application submitted
    8. Application Review Complete
    9. Permit Approved Complete
    10. Sub-Permits Issued Complete
    11. Permit Intake Complete
    12. Application review
    13. Permit approved
    14. Permit Issued Complete
    15. Issue date

    See this permit on One Stop

  2. Code enforcement Case 15-09567-MPM Closed

    The property was inspected on 10/21/2015 with a finding of "No Violation". The file was subsequently closed.

    1. Inspection: Inspection No Violation
  3. Permit General Mechanical Permit Finaled

    new gas line and tankless wh/ James915-5407/ 302/ ck1123

    Permit
    14-14467-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    James Arnold
    Days from application to issue
    0
    Expires
    Nov 7, 2014

    See this permit on One Stop

  4. Permit General Mechanical Permit Finaled

    rll-b-ragusa-841-3300-2-ac-2-waf-ck-2502

    Permit
    14-03285-MECH
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $108
    Contractor
    Brigham Ragusa
    Days from application to issue
    0
    Expires
    Jul 31, 2014

    See this permit on One Stop

  5. Permit Electrical Service / Circuit / Feeder Permit Issued

    RENOVATIONS- 13-34914

    Permit
    13-48557-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $109
    Contractor
    Richard Barr
    Days from application to issue
    0
    Expires
    Jun 20, 2014

    See this permit on One Stop

    Placed here by the building address from “4801 Danneel St #A”.

  6. Permit Electrical Service / Circuit / Feeder Permit Issued

    RENOVATIONS- 13-34914

    Permit
    13-48558-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $0
    Fees
    $109
    Contractor
    Richard Barr
    Days from application to issue
    0
    Expires
    Jun 20, 2014

    See this permit on One Stop

  7. Permit Construction Loop Permit Issued

    TEMP POLE- 13-34914

    Permit
    13-45965-LOOP
    Type
    Construction Loop
    Work
    Construction Loop
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Richard Barr
    Days from application to issue
    0
    Expires
    Jun 3, 2014

    See this permit on One Stop

  8. Permit Renovation (Structural) Occupancy

    Supplemental repairs to existing non-conforming 3-plex (4801 A,B, & C). Repairs include leveling, piers, and sills.

    Permit
    13-39824-RNVS
    Type
    Renovation (Structural)
    Work
    Renovation (Structural)
    Estimated cost (applicant’s figure)
    $20,000
    Fees
    $160
    Contractor
    Drennan Jonathan W
    Days from application to issue
    0
    Expires
    Apr 2, 2014

    See this permit on One Stop

  9. Permit Renovation (Non-Structural) Permit Issued

    Non-structural renovation to non-conforming 3-plex (4801 A,BC Danneel St) to include new plumbing, mechanical, paint and flooring. Non-coforming as to a 3-plex in a RD-2 zoning district) - Entergy printouts on file.

    Permit
    13-34914-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $100,000
    Fees
    $610
    Days from application to issue
    0
    Expires
    Feb 19, 2014

    See this permit on One Stop

  10. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-24493
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $96
    Contractor
    D & G Electrical
    Days from application to issue
    10
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    REWIRE

    Permit
    08ELC-24494
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $96
    Contractor
    D & G Electrical
    Days from application to issue
    10
  12. Permit General Mechanical Meter Release - Released

    new gasline; entergy gas leak; steven ; ck#19680.

    Permit
    08MCH-03755
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $45
    Contractor
    Dr.Pipe
    Days from application to issue
    5
  13. HDLC review HDLC COA

    Remove Old architectural shingle - Remove old underlayment -Re Nail all plywood with 3 inch framing nails - Install 10 Rolls of ice and water shield - Refurnish and Install new drip edge all around the perimeter of the home - Install 19sq of architectural shingles including 1sq of ridge and 1sq of starter. Installed shingles with 1 1/4 in nails - Refurbish and install 1 new turbine - Install new wall flashing if needed - Add New roof Jacks on roof - Haul away trash and debris

    See this record on One Stop · checked Nov 22, 2026