Marigny
2014 Dauphine Street is in Marigny, zoned HMR-1 (Historic Marigny, Tremé and Bywater homes, preserving existing character). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 8 permits on record here; the most recent, a general mechanical permit, was filed in May 2007. 8 are still open. On this block in the past year: 14 requests to 311 and 10 calls to police.
- Zoning
- HMR-1
- Historic district
- Faubourg Marigny (Full control)
- National Register
- Faubourg Marigny Historic District
- Council district
- C
- Ward
- 7
- Lot size
- 4,493 sq ft
- Parcel
- 41064253
Everything on record here
8 records, newest first · 8 open
-
Permit General Mechanical Meter Release - Released
gas line, gas water heater, George Miller (7732) (504)
- Permit
- 07MCH-06848
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $35
- Contractor
- ,
- Days from application to issue
- 5
-
Permit General Mechanical Meter Release - Released
gas line, gas water heater, George Miller (7731) (5040508-9001
- Permit
- 07MCH-06849
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $35
- Days from application to issue
- 5
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
rewire
- Permit
- 06ELC-23639
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- Van Electric Co
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
rewire
- Permit
- 06ELC-23641
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $126
- Contractor
- Van Electric Co
- Days from application to issue
- 10
-
Permit General Mechanical Application Acceptance - Approved
2-GAS WAF & TWO 3-TONAC. RICKY GEBBIA (#1306)
- Permit
- 04MCH-04516
- Type
- General Mechanical
- Work
- General Mechanical
- Estimated cost (applicant’s figure)
- $0
- Fees
- $104
- Contractor
- R.F.G. Mech.Cont.
- Days from application to issue
- 5
-
Permit Electrical Application Approved
CONSTRUCTION LOOP
- Permit
- 04ELC-04514
- Type
- Electrical
- Work
- Construction Loop
- Estimated cost (applicant’s figure)
- $0
- Fees
- $30
-
Permit Repair Application Acceptance - Approved No Review
Repair termite damage and rotten studs and sills. Replace wall covering as masonary. Rep. siding. Per c of a M340.
- Permit
- 04BLD-01349
- Type
- Repair
- Work
- Repair
- Estimated cost (applicant’s figure)
- $25,000
- Fees
- $175
- Contractor
- 4 H Construction Co.
- Days from application to issue
- 5
-
Permit Building
GENERAL REPAIRS DOUBLE RESIDENCE REPAIRS TO EXIST 2-STY DBL, SHEETROCK PAINT, TERMITE DAM. REPAIRS, ELECTRIC & EXTERIOR PER HDLC #13940. NON-STRUCTURAL NO INGRESS & EGRESS CHANGES.
- Permit
- B02001968
- Type
- Building
- Days from application to issue
- 0