Marigny

2408 Dauphine Street is in Marigny, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 13 permits on record here; the most recent, a mechanical fuel gas permit, was filed in September 2026. 5 are still open. There was 1 past code enforcement case, the latest in April 2009, all closed. On this block in the past year: 5 requests to 311 and 10 calls to police.

Zoning
HMR-3
Historic district
Faubourg Marigny (Full control)
National Register
Faubourg Marigny Historic District
Council district
C
Ward
8
Lot size
4,554 sq ft
Parcel
41064288

Everything on record here

16 records, newest first · 5 open

  1. Permit Mechanical Fuel Gas Other

    Rinnai tankless. Membership price: Rinnai tankless. •Drain and remove 2 existing tank units on shelf in first floor laundry room. •Cut out all exposed gas lines, waterlines and vent from laundry area for tank units. •Remove entire existing 4” vent (owner will have hole patched after work is complete). •Install new Rinnai 199k btu recirculating outdoor tankless mounted on exterior of home near laundry room. (Mount approximately 10ft in air to clear neighbors home). •Install new isolation valves on tankless. •Reconfigure 2 hot systems into 1. •Run new 1” pex waterlines from tankless to under home and connect to existing 1” and 3/4 copper waterlines. •Insulate exposed waterlines we install. •Run new 3/4 gas lines from existing gas line under home to tankless. •Install new 3/4 gas valve and flex. •Install new outdoor gfi outlet from nearest power source. •Run relief line down exterior wall to ground. •Install crossover valve in upstairs master bathroom vanity.

    Permit
    26-27873-FGAS
    Type
    Mechanical Fuel Gas
    Work
    Mechanical Fuel Gas
    Estimated cost (applicant’s figure)
    $7,749
    Fees
    $40
    Days from application to issue
    1
    Expires
    Mar 23, 2027
    1. Gas Line and Outlets Paid
    2. Water Heaters Paid
    3. Rough Mech Gas Res
    4. Water Heater
    5. Application Submitted Complete
    6. Application Review Complete
    7. Permit Approved Complete
    8. Mechanical Permit Review Complete
    9. Application submitted
    10. Application review
    11. Permit approved
    12. Permit Issued Complete
    13. Issue date
    14. Inspections Finaled Complete
    15. Gas Line Passed
    16. First inspection
    17. Certificate of Completion Complete
    18. Meter Release - Gas Complete
    19. Mechanical Permit Review Complete

    See this permit on One Stop

  2. Permit HDLC COA Permit Issued

    I'm replacing rotten wood around the outside of my home including siding boards, balcony flooring and trim boards. For the balcony flooring, I'm going to use the historically accurate 1"x3" plastic flooring. The rotten clapboards are being replaced with hardie plank or cement board. The rotten trim, some of the posts boards and house trim boards on the balcony will be replaced. They will be identical in dimensions to the original. I use a mill shop that makes blades for me that match the original trim profile. I have the trim pieces made out of Mahogany and use two coats of oil based primer to seal them before attaching them. There is also a window sill that needs to be replaced as well.

    Permit
    26-06995-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Sep 13, 2026

    See this permit on One Stop

  3. Permit Renovation (Non-Structural) Application Accepted

    Replacing rotten wood around the outside of the home including siding boards, balcony flooring and trim boards. Historically accurate 1"x3" plastic flooring will be used. The rotten clapboards are being replaced with hardie plank or cement board. The rotten trim, some of the posts boards and house trim boards on the balcony will be replaced. They will be identical in dimensions to the original. I use a mill shop that makes blades for me that match the original trim profile. I have the trim pieces made out of Mahogany and use two coats of oil based primer to seal them before attaching them. There is also a window sill that needs to be replaced as well.

    Permit
    26-06995-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $7,200
    Fees
    $240
    1. Application submitted

    See this permit on One Stop

  4. Permit HDLC COA Permit Cancelled

    This permit would be for replacing any of the rotten moulding, porch boards on the facade of my house. I will be having the original moulding copied and milled and replaced with a combination of recycled Cypress and kiln Dried Cedar. I am not changing a single dimension from the original construction of the house.

    Permit
    25-10837-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Oct 9, 2025

    See this permit on One Stop

  5. Permit Renovation (Non-Structural) Permit Cancelled

    This permit would be for replacing any of the rotten moulding, porch boards on the facade of my house. I will be having the original moulding copied and milled and replaced with a combination of recycled Cypress and kiln Dried Cedar. I am not changing a single dimension from the original construction of the house.

    Permit
    25-10837-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $6,000
    Fees
    $225
    1. Application submitted

    See this permit on One Stop

  6. Permit HDLC COA Permit Issued

    roof replacement

    Permit
    24-16567-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 29, 2024

    See this permit on One Stop

  7. Permit Renovation (Non-Structural) Permit Cancelled

    Roof replacement

    Permit
    24-16569-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $22,710
    Fees
    $353
    Contractor
    ARC Roofing LLC
    1. Application submitted

    See this permit on One Stop

  8. Permit Renovation (Non-Structural) In Review

    roof replacement

    Permit
    24-16567-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $22,710
    Fees
    $353
    1. Application submitted
    2. Zoning review

    See this permit on One Stop

  9. Permit Plumbing Permit Permit Finaled

    Water meter decrease

    Permit
    23-35086-PLMB
    Type
    Plumbing Permit
    Work
    Plumbing Permit
    Estimated cost (applicant’s figure)
    $0
    Fees
    $50
    Contractor
    Christopher Dimarco
    Days from application to issue
    36
    Expires
    Aug 1, 2024

    See this permit on One Stop

  10. Short-term rental Short Term Rental license application Denied
    Type
    Short Term Rental
    Operator
    Charles Woodall Jr
  11. Short-term rental Short Term Rental license application Denied
    Type
    Short Term Rental
    Operator
    Charles Woodall Jr
  12. Permit HDLC COA Permit Finaled

    Replace deteriorated weatherboards on east side of housewith smooth HardiPlank; add insulation and moisture barrier underneath new siding.

    Permit
    16-31897-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    7
    Expires
    Apr 3, 2017

    See this permit on One Stop

  13. Permit Renovation (Non-Structural) Other

    Replace deteriorated weatherboards on east side of housewith smooth HardiPlank; add insulation and moisture barrier underneath new siding.

    Permit
    16-31897-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $5,000
    Fees
    $128
    Contractor
    Merritt Dutch Landry

    See this permit on One Stop

  14. Permit HDLC COA Permit Finaled

    R/r siding.

    Permit
    14-20487-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Jan 1, 2015

    See this permit on One Stop

  15. Code enforcement Case ENVHADJ-90945 Closed

    The case was filed on 04/10/2009 but has since been closed without further action.

    1. Inspection: Inspection Complete

    The city links this case to permit 26-27873-FGAS.

  16. Permit General Mechanical Application Acceptance - Approved

    hurricane re-connect steve #14630

    Permit
    05MCH-05734
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Dr.Pipe
    Days from application to issue
    5