St. Claude
1217 Desire Street is in St. Claude, zoned HU-RD2 (Older neighborhoods, two-family homes mixed with single-family homes). It is in the Bywater historic district under full HDLC control, so most exterior changes need approval first. The city has 9 permits on record here; the most recent, a solar permit, was filed in April 2018. 3 are still open. On this block in the past year: 14 requests to 311 and 16 calls to police.
- Zoning
- HU-RD2
- Historic district
- Bywater (Full control)
- National Register
- Bywater Historic District
- Council district
- C
- Ward
- 9
- Lot size
- 3,435 sq ft
- Parcel
- 41064713
Everything on record here
9 records, newest first · 3 open
-
Permit Solar Permit Finaled
Solar - check meter.
- Permit
- 18-14233-SOLR
- Type
- Solar
- Work
- Solar
- Estimated cost (applicant’s figure)
- $21,000
- Fees
- $55
- Contractor
- Michael Anthony King
- Days from application to issue
- 53
- Expires
- Dec 19, 2018
-
Permit HDLC COA Permit Issued
Install 5.49 kW grid-tie solar pv system.
- Permit
- 18-13456-HDLC
- Type
- HDLC COA
- Work
- HDLC COA
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 3
- Expires
- Oct 26, 2018
-
Permit Renovation (Non-Structural) Other
Install 5.49 kW grid-tie solar pv system.
- Permit
- 18-13456-RNVN
- Type
- Renovation (Non-Structural)
- Work
- Renovation (Non-Structural)
- Estimated cost (applicant’s figure)
- $21,000
- Fees
- $248
- Contractor
- POSIGEN OF LOUISIANA LLC
- Days from application to issue
- 5
- Expires
- Oct 27, 2018
- Application submitted
- Application review
- Zoning review
- Plan review
- Permit approved
- Issue date
- First inspection
-
Permit Electrical Repair / Replacement / Addition Permit Finaled
REPAIRS MOVED OUTLETS & ADDED VENT CIRCUITS 17-41194-RNVS
- Permit
- 18-04323-ERPR
- Type
- Electrical Repair / Replacement / Addition
- Work
- Electrical Repair / Replacement / Addition
- Estimated cost (applicant’s figure)
- $0
- Fees
- $52
- Contractor
- Juan Jose Arriago-Moreno
- Days from application to issue
- 0
- Expires
- Aug 6, 2018
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit Mechanical HVAC Permit Finaled
install Dryer vent/ Repair and Alteration.
- Permit
- 18-03221-HVAC
- Type
- Mechanical HVAC
- Work
- Mechanical HVAC
- Estimated cost (applicant’s figure)
- $100
- Fees
- $65
- Days from application to issue
- 4
- Expires
- Aug 2, 2018
- Application submitted
- Application review
- Permit approved
- Issue date
- First inspection
-
Permit HDLC COA Permit Finaled
Termite treatment of home. Sister existing joists with new ones or remove existing joist that are damaged. 4 joists total (rear portion of D on plan). Remove and replace roof shingles. Remove 700 sf of vinyl siding and replace to match. Electrial provide a GFCI above the counter next to the refrigerator, also one at the wall common in the dinning room. In bathroom move light switch. Reinstall can light. Add light in the attic. Install new driveway fence gates, remove old ones. Install gutters and remove existing. Install wooden platform on the back entrance treated wood. Drywall replacement at dinning room. Flooring 300 sf ceramic tile in dinning room and kitchen.
- Permit
- 17-41194-HDLC
- Type
- HDLC COA
- Work
- HDLC COA
- Estimated cost (applicant’s figure)
- $0
- Fees
- $0
- Days from application to issue
- 5
- Expires
- Jun 11, 2018
-
Permit Renovation (Structural) Inspection Phase
Renovate single-family dwelling: repair/replace 4 joists; remove and replace roof, vinyl siding and gutters; minor electrial upgrades; replace driveway fence gates, and other work as per contractor's scope.
- Permit
- 17-41194-RNVS
- Type
- Renovation (Structural)
- Work
- Renovation (Structural)
- Estimated cost (applicant’s figure)
- $27,000
- Fees
- $383
- Contractor
- Tevye Ramazzini
- Days from application to issue
- 5
- Expires
- Jun 11, 2018
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 08ELC-18547
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- A & L Electrical Indust. LLC
- Days from application to issue
- 10
-
Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved
REWIRE
- Permit
- 08ELC-18548
- Type
- Electrical Service / Circuit / Feeder
- Work
- Service-Circuits-Feeders
- Estimated cost (applicant’s figure)
- $0
- Fees
- $90
- Contractor
- A & L Electrical Indust. LLC
- Days from application to issue
- 10