Marigny

916 Spain Street is in Marigny, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 15 permits on record here; the most recent, an HDLC COA permit, was filed in December 2017. 11 are still open. On this block in the past year: 8 requests to 311 and 3 calls to police.

Zoning
HMR-3
Historic district
Faubourg Marigny (Full control)
National Register
Faubourg Marigny Historic District
Council district
C
Ward
8
Lot size
4,877 sq ft
Parcel
41064908

Everything on record here

15 records, newest first · 11 open

  1. Permit HDLC COA Permit Issued

    Install k-style gutters on a shotgun double. Building currently has no gutters.

    Permit
    17-41360-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    5
    Expires
    Jun 12, 2018

    See this permit on One Stop

    Placed here by an address range from “916 Spain St, 918 Spain St”.

  2. Permit Renovation (Non-Structural) Other

    Install k-style gutters

    Permit
    17-41360-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $2,000
    Fees
    $205
    Contractor
    Audubon Gutters
    Days from application to issue
    5
    Expires
    Jun 12, 2018

    See this permit on One Stop

  3. Permit HDLC COA Permit Issued

    I am removing the old rotten cypress siding on both sides of the building which is lap siding with a exposure of 5". I am replacing with new hardie brand cement board with a exposure of 5 1/4". I am applying the new siding with smooth surface outward.

    Permit
    17-21650-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    7
    Expires
    Dec 28, 2017

    See this permit on One Stop

    Placed here by an address range from “918 Spain St, 916 Spain St”.

  4. Permit Renovation (Non-Structural) Other

    Remove weatherboards and replace with hardi-boards and install insulation per HDLC.916-18 Spain St No electrical, No meechanical. No change in sf. No change in foot print. No demo of exterior walls.

    Permit
    17-21650-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $24,040
    Fees
    $278
    Contractor
    JAMES KINDY
    Days from application to issue
    8
    Expires
    Dec 28, 2017

    See this permit on One Stop

  5. Permit Dumpster/Construction Zone In Review

    construction dumpster for removal of roof, will be moved June 16 before the end of the day.

    Permit
    17-21074-RCZD
    Type
    Dumpster/Construction Zone
    Work
    Dumpster/Construction Zone
    Estimated cost (applicant’s figure)
    $0
    Fees
    $180

    See this permit on One Stop

  6. Permit HDLC COA Permit Issued

    replacing existing fiberglass asphalt shingle roof with a new GAF Timberline HD slate blend color 30 year factory warranted fiberglass asphalt shingle roof

    Permit
    17-18717-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    0
    Expires
    Nov 30, 2017

    See this permit on One Stop

    Placed here by an address range from “918 Spain St, 916 Spain St”.

  7. Permit Renovation (Non-Structural) Other

    replacing existing roof with new

    Permit
    17-18717-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $4,150
    Fees
    $128
    Contractor
    Mackel Roofing Co Inc

    See this permit on One Stop

  8. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    CIRCUITS

    Permit
    07ELC-19227
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $36
    Contractor
    Landix Elect.
    Days from application to issue
    10
  9. Permit Electrical Repair / Replacement / Addition Application Acceptance - Approved

    VACANCY

    Permit
    07ELC-19228
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Landix Elect.
    Days from application to issue
    10
  10. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-07039
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Luis A. Orellana
    Days from application to issue
    10
  11. Permit Electrical Service / Circuit / Feeder Application Acceptance - Approved

    rewire

    Permit
    05ELC-07041
    Type
    Electrical Service / Circuit / Feeder
    Work
    Service-Circuits-Feeders
    Estimated cost (applicant’s figure)
    $0
    Fees
    $135
    Contractor
    Luis A. Orellana
    Days from application to issue
    10
  12. Permit General Mechanical Inspection - Completed

    INSTALL ELEC WAF AND 4-TON A\C SYSTEM. GLENN REED (# (#1205)

    Permit
    05MCH-03360
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $65
    Contractor
    Glenn Reed Ac Inc.
    Days from application to issue
    5
  13. Permit General Mechanical Inspection - Completed

    INSTALL ELEC WAF AND 4-TON A\C SYSTEM. GLENN REED (# (#1205)

    Permit
    05MCH-03361
    Type
    General Mechanical
    Work
    General Mechanical
    Estimated cost (applicant’s figure)
    $0
    Fees
    $40
    Contractor
    Glenn Reed Ac Inc.
    Days from application to issue
    5
  14. Permit Renovation (Non-Structural) Application Acceptance - Approved No Review

    Reneovation to both units,916-918,work to include:Electrical,Hvac,Plumbing,Extending walls in bathrooms,adding doors,Paintng and Replacing kitchen appliances.No exterior work allowed under this permit.Home Owner signed application.

    Permit
    05BLD-01216
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $10,225
    Fees
    $105
    Days from application to issue
    5
  15. Permit Electrical Repair / Replacement / Addition Inspection - Completed

    vacant over 1 year

    Permit
    05ELC-02522
    Type
    Electrical Repair / Replacement / Addition
    Work
    Repair-Replacement-Addition
    Estimated cost (applicant’s figure)
    $0
    Fees
    $30
    Contractor
    Borne Elec.Co.Inc.
    Days from application to issue
    10