Marigny

720 Franklin Avenue is in Marigny, zoned HMR-3 (Marigny, Tremé and Bywater single- and two-family homes, with some small multi-family buildings). It is in the Faubourg Marigny historic district under full HDLC control, so most exterior changes need approval first. The city has 9 permits on record here; the most recent, an electrical service / circuit / feeder permit, was filed in October 2024. 3 are still open. On this block in the past year: 5 requests to 311 and 3 calls to police.

Zoning
HMR-3
Historic district
Faubourg Marigny (Full control)
National Register
Faubourg Marigny Historic District
Council district
C
Ward
8
Lot size
2,564 sq ft
Parcel
41065555

Everything on record here

9 records, newest first · 3 open

  1. Permit Electrical Service / Circuit / Feeder Permit Issued

    Upgrade electric service to 120/240v 200 amp and rewire front room, 2 bedrooms, kitchen, bathroom.

    Permit
    24-30821-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $8,000
    Fees
    $148
    Contractor
    Timothy Shawn OGrady
    Days from application to issue
    6
    Expires
    Apr 15, 2025
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  2. Permit Electrical Service / Circuit / Feeder Permit Issued

    Upgrade electric service to 120/240v 200 amp and rewire front room, 2 bedrooms, kitchen, bathroom and add central HVAC

    Permit
    24-03931-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $8,000
    Fees
    $148
    Contractor
    Timothy Shawn OGrady
    Days from application to issue
    23
    Expires
    Sep 3, 2024
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  3. Permit HDLC COA Permit Cancelled

    This application is a request for permit renewal. Permit # 21-22658-RNVN Replace damaged plaster with insulation and drywall, upgrade electrical to 200 amp service, replace old plumbing and install central HVAC for a single-family dwelling.

    Permit
    23-26233-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0

    See this permit on One Stop

  4. Permit Renovation (Non-Structural) Permit Cancelled

    This application is a request for permit renewal. Permit # 21-22658-RNVN Replace damaged plaster with insulation and drywall, upgrade electrical to 200 amp service, replace old plumbing and install central HVAC for a single-family dwelling.

    Permit
    23-26233-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $32,000
    Fees
    $420
    1. Application submitted

    See this permit on One Stop

  5. Permit Electrical Repair / Replacement / Addition Permit Issued

    Upgrade electric service to 120/240v 200 amp and rewire front room, 2 bedrooms, kitchen, bathroom and gas fired HVAC

    Permit
    22-17862-ERPR
    Type
    Electrical Repair / Replacement / Addition
    Work
    Electrical Repair / Replacement / Addition
    Estimated cost (applicant’s figure)
    $8,000
    Fees
    $148
    Contractor
    Timothy S OGrady
    Days from application to issue
    2
    Expires
    Dec 17, 2022
    1. Application submitted
    2. Application review
    3. Permit approved
    4. Issue date

    See this permit on One Stop

  6. Permit Renovation (Non-Structural) Permit Issued

    Replace damaged plaster with insulation and drywall, upgrade electrical to 200 amp service, replace old plumbing and install central HVAC for a single-family dwelling. Permit extended until April 10, 2024

    Permit
    21-22658-RNVN
    Type
    Renovation (Non-Structural)
    Work
    Renovation (Non-Structural)
    Estimated cost (applicant’s figure)
    $32,000
    Fees
    $590
    Days from application to issue
    196
    Expires
    Sep 7, 2022
    1. Application submitted
    2. Application review
    3. Zoning review
    4. Plan review
    5. Permit approved
    6. Issue date

    See this permit on One Stop

  7. Permit Electrical Service / Circuit / Feeder In Review

    Upgrade 100 amp Service to 200 amp Service

    Permit
    17-29185-SERV
    Type
    Electrical Service / Circuit / Feeder
    Work
    Electrical Service / Circuit / Feeder
    Estimated cost (applicant’s figure)
    $900
    Fees
    $100

    See this permit on One Stop

  8. Permit Change of Use Permit Issued

    Convert existing double into a single(1 kitchen and 1 electrical meter to remain) and repair existing damage sills, and install new hardiboard siding to match existing as per HDLC C/A # 15-18075-HDLC.

    Permit
    15-18075-CUSE
    Type
    Change of Use
    Work
    Change of Use
    Estimated cost (applicant’s figure)
    $17,770
    Fees
    $225
    Contractor
    GWJ Industrial Supplies and Construction LLC
    Days from application to issue
    2
    Expires
    Dec 18, 2015

    See this permit on One Stop

  9. Permit HDLC COA Permit Issued

    Repair existing damage sills, and install new hardiboard siding to match existing as per HDLC C/A #

    Permit
    15-18075-HDLC
    Type
    HDLC COA
    Work
    HDLC COA
    Estimated cost (applicant’s figure)
    $0
    Fees
    $0
    Days from application to issue
    2
    Expires
    Dec 18, 2015

    See this permit on One Stop